Honda VF1000 buggy build part 14

Подписаться 654 тыс.

Просмотров 248 тыс.

50% 1

check out go power sports for all your go kart needs
bit.ly/2sC3WLT
ratherBwelding merchandise
bit.ly/2PF21Vf
Follow me on Instagram rather_bwel...
Rogue Fabrication tubing notcher:
bit.ly/2LmHrX1
Go power sports parts I used in this video:
steering wheel
bit.ly/2XbidNe
steering knuckle
bit.ly/2URNdnS
go kart steering kit
bit.ly/2P6IwkA
5 point seat belt
bit.ly/2UPQqV5
radiator fan
bit.ly/2Kiy5u5
brake lines
bit.ly/2JTW9DY
master cylinder
bit.ly/2QHDtrU
Auxbeam lights I used:
15W work lights
bit.ly/2EPS
18W head lights
bit.ly/2Z89BrH
4ft whip light
bit.ly/2Z1Pvza
Other parts I used in this video:
King Shocks 2.0 Emulsion Coil-Overs in 16" Travel with Springs PR2016-CONRS PAIR
ebay.to/2F9UE13
King Shock Coil-Overs 2.0 Emulsion in 14" Travel with Springs PR2014-CONRS PAIR
ebay.to/2F1XzHJ
JEGS 70250 Pro High Back II Race Seat
amzn.to/2Fa3DPI
JEGS 70280 Pro High Back II Vinyl Seat Cover
amzn.to/2TLTbWB
Barnes 4WD B4WK0116 - Panhard Bar Rod End Heim Joint Kit 3/4 x 3/4-16 CHROMOLY HMS 3/4-5/8
amzn.to/2O6niTK
Barnes 4WD B4WK0062 - Panhard Bar Kit 3/4 x 3/4-16 Econ Heim Joint Bungs for 1" ID Tube
amzn.to/2FcM8yp
CV axles
amzn.to/2BNALKf
s10 hubs
amzn.to/2EVISrg
sprocket
ebay.to/2BMMLf9
Music by Epidemic Sound (www.epidemicsound.com)

Развлечения

Опубликовано:

13 июл 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@farmerjackson709 5 лет назад

The light protector bar looks fine, makes it look like a desert racing machine

@angryrooster9867 5 лет назад

i see storage rake in the long run ...

@gilbertsprojects2954 5 лет назад

I like it, it kinda reminds me of when people used to flip the peak up on a cap 🧢 in the 80’s...

@0075akosmakos 5 лет назад

i think those light covers looks pretty good. they give the buggy some character, some spirit. they mage it alive. i think you should let them on.

@joshuamorehead6124 5 лет назад

It looks badass

@tom5051666 5 лет назад

looks too heavy

@jeffy1670 5 лет назад

if the cylinder is flooded with gas then the oil is contaminated. You will eat the bearings up if you dont change the oil.

@rockyrivermushrooms529 5 лет назад

that homemade lathe is still one of my favorite aspects of this channel. so cool!

@egjr2722 5 лет назад

Rocky River Mushrooms Agreed! I wanna make one so bad now.

@SirTrueblood1 5 лет назад

Have parts you need send a pm, have a few Honda's laying around the barn you can have. Also have an old Honda turbo bike.

@dmritchie3 5 лет назад

How much for the turbo Honda?

@Mad.Man.Marine 5 лет назад

RAYMOND TRUEBLOOD cool. What kinda turbo bike is it. Sounds fun as all hell.

@robmanueb. 5 лет назад

@@Mad.Man.Marine Honda made a CX500 with a turbo

@Mad.Man.Marine 5 лет назад

robmanueb2 shit. I bet that was a fast little bike knowing honda

@shaunpc2512 5 лет назад

robmanueb2 Honda made a few turbo bikes brother, cx500, cx650 and cb750 turbo

@theirishaxe9405 5 лет назад

Let's see these peoples 12 year olds build a full suspension buggy from scratch. Who cares what idiots say man. I was gonna say though give er some gas! 👍👍

@austinisaperson6093 5 лет назад

I’m in 8th grade, and 90% of my classmates couldn’t tell you what a camshaft is 😂 I feel bad for them...

@kylekdk456 5 лет назад

@@austinisaperson6093 That won't change when you get older, that's why independent mechanics make so much money... they rip off every single person who walks through the door because they have no idea what needs to be replaced and they wouldn't know how to check if the work was actually done even if they were smart enough to check.

@brandongamble5223 5 лет назад

kylekdk456 facts

@kevinolson5112 5 лет назад

I built a go kart from scratch when I was thirteen,and modified the engine with a new rod and high performance carburetor, and did some head work.

@kylekdk456 5 лет назад

@@kevinolson5112 I converted an electric mini bike to gas and welded on an extended swing arm when I was 11 I also built a UTV with a 5 speed sequential gear box when I was 14. Theres honestly probably a lot of 12 year olds that could do what he's done considering no engineering went into the project and he kinda just threw it together. Unfortunately most of those 12 year old don't have any money so their projects don't get done.

@ALLDAYinsideBRO 5 лет назад

Damn bro, I’ve been watching you since the old days with the death bike lol, things catching on fire, and now you’re a full fledge engineer 😂 I hope I can meet you one day!

@austinisaperson6093 5 лет назад

I’m from Ohio, and I’ve never been to Busco Beach, but Cars and Cameras make it look pretty cool. You should call them up and ask them to bring their Honda-powered full independent suspension buggy and some cameras. I would watch that just like I’ve been watching every single one of their videos for years. Years before they sold hats.

@SM-cg2dc 5 лет назад

I actually like the lights and the unibrow.

@tacobell9212 5 лет назад

Busco Beach ATV park in goldsboro nc. Same place where Carsandcameras has had there last couple meet.

@matthewbanks263 5 лет назад

Word for word what I was going to post, lol

@tacobell9212 5 лет назад

I'm in north Carolina to

@tonyash8080 5 лет назад

yes yes yes... but first mud flaps and fenders for the front.

@draggonhedd 5 лет назад

YES GO THERE

@NikMartin-I-am 5 лет назад

Young Champ i watch them, but they are total hacks

@nicolashoyt5341 5 лет назад

A spring tensioner instead of bolt tensioner would fix the decel noise. Also it's a long drive but if you brought it up to the Indiana Badlands they have off road trails that would work well with it as well as a large sandy area. Take the trip a little further north and you end up at the Michigan dunes.

@AQUATICSLIVE 5 лет назад

Glad you got it working. Suggest to shutoff the fuel whenever you turn it off. You can get a solenoid type shutoff so it shuts off whenever you turn off the key. Moving the buggy when its not running tends to make the floats jump around and flood it. Especially when its on a trailer bouncing around so make sure you turn it off if you are going to trailer it to some trails.

@metalman065 5 лет назад

It's yours. You should do whatever you want to do with it. Bunch of keyboard commando's. I enjoy watching you and whatever you do, every body has their own ideas, you have yours. Thanks for the videos. Keep up the good work.

@fabricationnation8052 5 лет назад

Well done buddy...As long as your happy that's all that matters!! Try to block out the haters. I'll bet they didn't build they're own bad ass buggy. Keep pushing and keep learning everyday and your possibilitys are endless.

@nzzs203 5 лет назад

Oh, you mean people with opinions? I like it, but everyone out there may not. That's part of learning. Listening to what other people have to say.

@Felix-ib7ji 5 лет назад

Im really looking forward for every video you create, pls keep on posting

@TheDestructor888 5 лет назад

I love the sound of that engine. Reminds me a bit of the GAU-8 gatling cannon

@bbrown87609 5 лет назад

That is a fantastic job of building the entire machine, congratulations .

@karnesrussell 5 лет назад

Weld it up, cut teeth, heat till red cool in oil. Then put in oven at 375 for 1 hr. Let cool down itself.

@geoffreyjones2000 5 лет назад

I was going to say the same thing...maybe hardness test before and after

@preventingboredom4418 5 лет назад

Dude really needs to do this

@karnesrussell 5 лет назад

Take you're time no pin hole's

@nzzs203 5 лет назад

Why not use the one that he used??? Making a gear isn't as easy as just welding, grinding and hardening...

@snizzsnazz 5 лет назад

Busco Beach ATV Park. It's in Wayne County, NC

@AdamBeaudryMasterProton 5 лет назад

Just said same thing lol glad i'm not the only one

@trecedaves3159 5 лет назад

Me 2, lots of flat area to ride and some good trails that buggy would eat up

@montanawestphotography6671 5 лет назад

Dude that buggy would be awesome for the mountains out here in Montana. You would never leave!

@trimaranchuck 5 лет назад

Well done. Ignore the detractors!!! Your passion for this stuff is amazing!!

@theupscriber65 5 лет назад

Add some heavy weight inserts to your flywheel/clutch to add mass. The added momentum will help you take off.

@kadenolson9075 5 лет назад

Finally! I’ve been waiting for this to come out

@austinisaperson6093 5 лет назад

Screw Audi dude, buy an American car, or something that’s at least BUILT in America (ex. Honda) Where the hell are your Bald Eagles?

@kylekdk456 5 лет назад

@@austinisaperson6093 A lot of Toyotas are also built in America , you're pretty smart for an 8th grader dude

@kadenolson9075 5 лет назад

Austin Is a Person lol ever heard of Quattro? first AWD system that was perfected by Audi. It doesn’t matter about bald eagles buddy, engineering and quality play a big part in why an Audi will be worth more than an American base model car

@kadenolson9075 5 лет назад

kylekdk456 Have you ever owned an Audi or been inside one that hasn’t been beaten to hell? And why would I be drag racing my Audi? The Quattro system is better than any BMW xDrive. Why do you think the Audi group B dominated the rally racing scene in the 80s? They literally got banned in 1986 for having an advantage over the other cars. Stop getting butthurt that other countries can make good things too, most of the stuff you use on a daily basis most likely isn’t even made in the USA

@kylekdk456 5 лет назад

@@kadenolson9075 I worked at a german car dealership for three years so yes I've been in thousands of brand new Audi's. I never said that other countries can't make good stuff... I'm a big fan of Japanese products of all sorts. And my favorite car is my M3. Everything that I said is true. There's only one person who's butthurt and it's you buddy.

@Echofourtwenty 5 лет назад

Come hit some of the old logging roads in western North Carolina/East Tennessee. There are plenty of places west of Beech Mountain around the Cherokee National Forest you can drive it. You should make that Unibrow into a Cargo basket. it would tie it into the frame a little more and it wouldn't look so out of place (personally, I like it). This is one of my favorite custom buggy builds so far and I think you're doing an awesome job!

@notimegarage8632 5 лет назад

Ooooof, the mystery Ebay box paid off!!! Been watching this build since day one and it's been amazing dude!

@JR36802 5 лет назад

Yeah man that’s pretty dang good and for what it’s worth I like the light cage I like the whole buggy great content man keep good what you do

@heimlichhotrods 5 лет назад

You need to shim that starter or your going to eat that new gear ⚙️😎👍that thing is a beast 🚗💨💨💨💨💨awesome job 🤘🏻

@heimlichhotrods 5 лет назад

Lol it’s sounds horrible 😳 needs something 😂😂😂🤘🏻🤘🏻🚗💨💨💨

@captainlandyacht1328 5 лет назад

I like the light bar, nice work on the gearing, and fuel shutoff is an excellent idea.

@lucasalling420 5 лет назад

That light bar looks sick I think it's a great touch. Good job!!

@toddbob644 5 лет назад

Busco Beach is pretty flat. Do a colab with the cars and cameras guys. They are making a cross kart.

@GumpterCrayon 5 лет назад

Their cross kart has so much potential but they are doing a shitty job

@happejojja687 5 лет назад

@@GumpterCrayon How so?

@GumpterCrayon 5 лет назад

@@happejojja687 the welds and support on the front suspension is ghetto as fuck, and the overall design of the front is shite. But other than that it looks like a cool kart

@jacobstofmeel3619 5 лет назад

Bryn I had to stop watching cars and cameras, I love John and Ike but they just haven't really evolved with there projects and as truck mechanic it's hard for me to watch them hack there way through projects with there "it'll be fine" attitude, I'm afraid that attitude is going to hurt them really bad one day.

@GumpterCrayon 5 лет назад

@@jacobstofmeel3619 the sad thing is I think ike IS a mechanic. I guess he's one of thoes people that make you think "how the he'll are you qualified"

@aaronale5 5 лет назад

When you had that old bearing in the idler, I was screaming at the screen.. Thanks for just using it a placeholder.. :)

@stevelecain886 5 лет назад

by far your best build to date, that thing is insane.nice job.

@wishbone20t 5 лет назад

To be honest this is the best build I've ever watched!

@CainSample 5 лет назад

FYI an easy fix would be installing a fuel shut off before carbs n turn it off n run gas out of carbs when your done riding it 👍👍

@nzzs203 5 лет назад

That's exactly what he said he was going to do.

@232Stangpwr 5 лет назад

You should probably pull a few links out of that chain for less stress on your chain and drive line

@nzzs203 5 лет назад

Lol. It's a tensioner. He can tighten & loosen it need be.

@232Stangpwr 5 лет назад

@@nzzs203 Right but if the chain is wrapping around too much of the driven gear that the tensioner is closest to it could hit teeth against the tensioner and rear axle gear. Also less chain weight = less parasitic drivetrain power loss.

@madduxmays2495 5 лет назад

I like the light bar. Nice job 👍🏼

@Wildlandfirefighting 5 лет назад

Glad you got it working again, waiting for the real shake down

@daveboles3036 5 лет назад

There's that place Cars and Cameras always goes to, I think it's called Busco Beach,

@camaroguy2919 5 лет назад

You can always send the broken part to a machine shop they can whip ya up a new one..

@josephfox1192 5 лет назад

I think he is his own Machine shop you know, I am sure he could handle it

@josephfox1192 5 лет назад

@Youll Never Know I understand it's not just that easy, but from what I have seen him do over the years I know he is capable of doing it, but it would be time consuming being that he doesn't do it everyday,

@Nevertrustalawyer 5 лет назад

Matthew Crandall sure they can... for a thousand dollars.

@redneckswitwheels 5 лет назад

He isnt a machinist

@camaroguy2919 5 лет назад

@@Nevertrustalawyer A grand that sounds like a BS number to me. But! I could be wrong. Ither way you have to admit that it is a option

@Itsthekellyschannel 5 лет назад

We use Riderplanet web sight, has every park in the country with all details and maps, we have two videos featured on there for a park in Colorado and one in California 👍 Love the buggy!

@jaredbennett9568 5 лет назад

That's the craziest luck finding that gear in the box, good job. I like the light bar. Extend it back and make it a luggage rack! I'm sure the buggy would do fine on rough trails with a bit more ride height. Idk how you would fair, but the buggy would be fine. Give us a test drive through the neighborhood!

@tyler238 5 лет назад

Take it to a machine shop and have someone fabricate a new gear

@tyler238 5 лет назад

Damn if I was still at my old shop I’d definitely CBC machine you a new gear ⚙️

@fullmetaljacket7 5 лет назад

That would be insanely expensive unless he has a friend that could do it for him

@Toolingabout 5 лет назад

Y’all should try watching the video

@Eric91611 5 лет назад

@@fullmetaljacket7 lol umm no machine shops are about $70/hour in Cali USA not that much for specialty work like this and if your already sinking money into engine parts you can afford a machinist.

@fullmetaljacket7 5 лет назад

@@Eric91611 that's not a simple piece they would cut in a couple of hours in a lathe. It would cost more than that engine is worth. It's just not worth it.

@timriggs5192 5 лет назад

You need to contact "This Old Tony" on RU-vid he makes a lot of gears and might be able to help you out on your gear issue.

@markland4575 5 лет назад

Tim Riggs definitely

@esqueue 5 лет назад

With the carburetors removed, try flipping it upside-down and blowing into the gas feed. If air gets past, the needle isn't sealing properly. A qTip may be used to clean the hole. Also, when it is upside down, make sure that the floats don't kick up too much, you may need to slightly bend them so they sit flat when upside-down. Finally, make sure that the floats aren't leaking. Shake them up and if you hear rattling, they are leaking.

@joshua7809 5 лет назад

Things happen for a reason, fuck the negativity I love ur style. Keep the good ones coming.

@bwxmoto 5 лет назад

Nickname it "Digger".. since it's digging trenches in your yard. :-D

@jurriendw050 5 лет назад

You need to put a cross pipe between te two exhaust than you get more power at hire rpm because than its gets better flow and does it not work like two ceperate engines

@garageadz 5 лет назад

Hey bud if your bowls are filling up during inactivity either your floats are broken (sinking in the bowl contents) OR the float needles are leaking and just need to be re-seated. Good videos, hope this helps.

@poco1990 5 лет назад

I think the light bar looks awesome!

@davekulman8195 5 лет назад

Dude try eastern Michigan cycle he has a lot of used part's in great condition

@jnljnl8485 5 лет назад

Time for a tl1000 swap. Those suzukis sold prety good.

@LostinWales 5 лет назад

Stupid idea! TL'S rip gearboxes apart when they are in the bikes I've done it twice on mine! Putting it in a buggy will shred the gears even quicker!

@nicovanduin1553 5 лет назад

@@LostinWales suzukis are notorious for bad gearboxes

@LostinWales 5 лет назад

@@nicovanduin1553 yes but the TL's are notorious for ripping 3rd gear regularly!

@CobaltOntarioadventures 5 лет назад

These Interceptor engines are reliable as any other Honda if taken care of... this is a carb sync issue. It's going to cause damage if its not taken care of soon.

@JETHO321 5 лет назад

Ty Olson - Cobalt, Ontario adventures! Has nothing to do with carb synchronization. The damn needles aren’t closing off the fuel flow and it’s pouring into the cylinders.

@garypeterson9083 2 года назад

Check with the guys at cars and cameras for an off road park. They go to Bossco Beach or something like that. It has a drag strip where you could air it out a little bit. Really love your build, you are a very gifted fabricator. Well done.

@JonesMcZac 5 лет назад

Hi! We built our chain tensioner using a damper from a car's rear door. It dampens the vibrations and makes the tensioning dynamic. Also I reckon you could shorten the chain for one or two links. Keep up the great work! This thing is amazing!:)

@janoel6822 5 лет назад

Time get it done Chris just finished the dune buggy you might have a buyer line up

@axxiiicara4600 5 лет назад

He does... I'm willing to buy this... how much does it cost?

@alexking4082 5 лет назад

@@axxiiicara4600 Custom buggies like this run in the neighborhood of $8-$15 grand. And that's IF he wants to sell it. I know I wouldn't.

@jacobstofmeel3619 5 лет назад

What's this other channel you speak off? The more channels to watch the merrier.

@janoel6822 5 лет назад

Okay thanks for the advice.

@nearsightedfromthefarside6534 5 лет назад

Dude. I have an 86 vf1000r... I am also a member of a couple of groups on Facebook dedicated to this bike... I’m pretty sure we can help you out... let me know bud

@1hipcrip771 5 лет назад

That's a beast you've put together!

@joshhoward6127 5 лет назад

I think the light rack makes it look even better and offers protecion!

@jamadeus13 5 лет назад

Please, just put a small V8 in it. A BMW 530i engine maybe? That's a 3.0L V8 with some nice torque

@rugger8787 5 лет назад

Jonathan Amadeus a vtec would do really nice

@jamadeus13 5 лет назад

@@rugger8787 Yeah maybe

@SHSPVR 5 лет назад

That is just dumb then and still to big

@nickrudd2568 5 лет назад

Try Dave Silver in UK for honda parts, He has everything everything!!!!

@charlesallen5425 5 лет назад

Good job, can wait to see you take it out for a real rip!

@AlphaMachina 5 лет назад

As tall as your cage is, you could have just hung the lights upside down from their mounts and it shouldn't interfere with your LoS. Defeats the purpose of the unibrow and protec lite same time, kay. But honestly, the unibrow looks awesome. Also, to get rid of the chain tensioner sound, you should load it with a very heavy spring. Something that won't give too much, but just enough to let the tensioner sprocket move when the chain oscillates due to change in speed and therefore frequency of vibrations during deceleration.

@sirspikey 5 лет назад

if the partnumbers are different then yes the parts are different, otherwise they wouldn't change the partnumber...

@Ratkill9000 5 лет назад

Sometimes its the same part just a superceded part number. Happens often in the automotive world.

@everythingfeline7367 5 лет назад

You'd be suprised, A different part number could just mean it was made by a different manufacturer

@nzzs203 5 лет назад

It was just missing the last number. The other numbers were the same.

@kyevandermerwe4901 5 лет назад

ship me the sample and I'll get one made for you

@BillBogan 5 лет назад

That thing rips! Nice work.

@kevinschreyer 5 лет назад

Love this machine! I learn something new with every video I watch! Thanks Chris!

@calholli 5 лет назад

Well at least now we know its top speed won't be over 45mph... since you have it so low geared. lol.

@abde4645 5 лет назад

Can you please please make some kinda seat belt that thing looks to be powerful you don't wanna end like vasily builds

@gmartin8043 5 лет назад

I like the light protection cage, leave it on, looks cool , I think the dimensions equals out the top. 👍😎

@blackbartbartholomew7122 5 лет назад

The light bar looks great, it’s functional and that’s all that matters. One more thing the Hatfield McCoy trails here at the Pinnacle trail head are rated at different levels from easy all the way to extremely difficult. That machine is more than cable of a couple of different levels, maybe not extreme but many of the others. I live about 2 1/2 miles from the trail head.

@spicydeath82 5 лет назад

well aren't you in the same state as cars and cameras? if so why not head to bosko beach where they always go? it's sandy, fairly flat and if their yerfdog can handle it, your buggy should be able to as well.

@looserdownfab5219 5 лет назад

To camouflage your quote unibrow why don't you just put a roof rack on the top and I'll make it blend in

@Symbolizer21 5 лет назад

Would be even more weight that isn't need I think

@looserdownfab5219 5 лет назад

@@Symbolizer21 they make aluminum roof racks and cargo holders

@michaelyargo3851 5 лет назад

I thought the same thing but throw a spare tire up there too

@looserdownfab5219 5 лет назад

@@michaelyargo3851 a tire would make it too top-heavy but you can mount the spare on the back so I won't look like it has Turtle ass

@manueltovar9963 5 лет назад

Great gob man you had problems and over came evreything To find more and still didnt give up great job

@dozer1642 5 лет назад

I think the mailbox forge is my favorite! Great job doing what you do. Pay no attention to the haters

@noahwayne4918 5 лет назад

I sent you a dm of aTrains axle for motorcycles on buggies that gives them reverse

@Drifter982 5 лет назад

Noah Wayne can you send that my way as well

@notisp 5 лет назад

Put on a turbocharger and it will spinning those tires with every gear🙂

@jamesdeans971 5 лет назад

I think a turbo would be badass

@maknak4041 5 лет назад

It's not fuel injected

@jamesdeans971 5 лет назад

mak nak you know what that slipped my mind even with the first part of video was him talking about the carburetors smh... but damn how cool would a turbo spool and bov sound on this thing

@NVMDSTEvil 5 лет назад

@@maknak4041 and? Can still turbo it.

@maknak4041 5 лет назад

@@NVMDSTEvil no you can't cause it will mess with the carburetor.

@Raptor-700R 5 лет назад

That came out sweet looking. Turned out great

@aventurasdeanllelyn9104 5 лет назад

Greetings from Guatemala 🇬🇹 I always watch your videos. excellent projects 👍👍👍

@kyevandermerwe4901 5 лет назад

maybe weld the gear and then get a dremel tool and shoe the teeth?

@ericrudgers6816 5 лет назад

You didnt finish the video did you?

@kyevandermerwe4901 5 лет назад

@@ericrudgers6816 only towards the end

@NASTYcraftX 5 лет назад

In 2019, no matter how hard I try, I cant believe the gear in the Ebay wasnt staged lol.

@motomule 5 лет назад

Plan a road trip to Oregon with that buggy!! I'll show you around the dunes here. You'd definitely get it out of first gear here!! Plus, I'll have my golf cart running soon, be fun to race!!! 😄😄😄

@thomashope9569 5 лет назад

Light bar protector looks badass to me

@JNET_Reloaded 5 лет назад

You need to greese things more thats why the nasty noise and probably why last 1 broke!

@KingsColas 5 лет назад

No lol

@JNET_Reloaded 5 лет назад

@@KingsColas no what?

@KingsColas 5 лет назад

No.... using grease alone wouldnt stop that noise. Grease has nothing to do with why it did that. Js

@Hermanimace 5 лет назад

About chain tensioner.... look my video :) I solved it ;)

@SHSPVR 5 лет назад

That good idea Pavel using that type chain guide or could lower chain tensioner by a lot

@Hermanimace 5 лет назад

The best solution is when the chain is tightened with a rear sprocket and does not go through any tensioner. I couldn't do it otherwise, because I have a gear shift there. Sorry for my english. I am from Europe :D

@SHSPVR 5 лет назад

@@Hermanimace I get it but RBW can lower his a lot, if you had ATC 70 they had a sprocket roller fix tensioner

@rexmorgan72 5 лет назад

That looks like an amazing build to me. Fine work.

@JOSHUAloves1 5 лет назад

The light protection actually looks pretty awesome!!

@cam_shaftgaming1820 4 года назад

You're in North Carolina?! So am I! I just looked up buggy builds and you're the first one I saw. I've watched 14 episodes in a row and you just mentioned NC. That's awesome.

@nickschneider4872 5 лет назад

Love what you do man, can’t wait to see what the buggy can do, keep up the good work

@tylerthomas3744 5 лет назад

Probably to sickest buggy build on RU-vid.

@danw1955 5 лет назад

Your chain tensioner needs to be spring-loaded or have some sort of rubber compensator between the tensioner and the support arm for the tensioner, to quiet it down. Another solution would be a (larger) nylon roller like they use on dirt bikes. You definitely lucked out on the intermediate starter gear! You also lucked out that it didn't bend a rod or crack a cylinder wall when it hydro-locked, instead of stripping the starter gear. Will be interesting to see how it runs once you get the gremlins worked out.😉

@andrewnelson1496 5 лет назад

Can’t wait to see it ripping around on some buggy tracks!! Keep up the good work man..... 🔥✌🏾

@nathangek 5 лет назад

Extend the light protector bar all around the top and make it a roofrack. Then add a gas can and some tires and you got yourself a cool looking buggy :)

@jlucasound 5 лет назад

I Love it when a gear (or gear) comes in the mail, like, last week. :-) Glad it worked out for you. I think the tank is too high and the pressure is overtaking the capacity of the floats. It doesn't take much. I am pretty sure you have reached the same conclusion. I LOVE the VF Series. Watched them race. Loudon/Laconia 1983. (750 Interceptors). They dominated the track. Yes, I camped out in the back (before it was banned). Yes, I am the guy that ran the "gauntlet" and jumped my Kawasaki (two stroke triple) street bike. I'm OK. No, I did not crash and the jump was 8 feet (high). I landed 25 feet away. (Sorry, I'm Bragging). But that was me. Where was video back then?

@brucewayne1220 5 лет назад

Man you are the best.. This channel is gold

@FloridaMan0561 5 лет назад

Awesome fabrication skills man.

@indyjones3287 5 лет назад

I think you should hang the lights under the bar, then run a bar under them. Looking at the profile, you sit very low, and the buggy is very tall. Plenty of room to do that and make it look mean from front, like a furrowed brow. The chain tensioner needs a spring and pivot to float. I think that'll quiet it up. Keep up the good work man; I enjoy watching your vids. Hammering in the bearings had a nice beat. Cheers!

@Dj.maddox89 5 лет назад

Bring it to brushy mountain! Its in Taylorsville, there's about 40 miles of side by side trails. Lots of flat trails but also trails with a lot of elevation.

@markgallagher5085 4 года назад

Dude put some grease in that tensioner! AWESOME BULD!

@henrylitjes5695 5 лет назад

He man make sure that the chain tensioner is not that much of a angel. It’s a fixed setup not a movable one like a dirt bike. So get that chain as even as possible then your rattling noises are gone. So get some links removed. And fine tune this absolutely fantastic looking ( Suspense buggy) and enjoy the hack out of it. And if it breaks down double it up (double chains) because you are going to ware out that chain faster than normal during the more weight. And perhaps some mudguards for protection. Fantastic work man I can see it already, you are going to make a lot more of this. You need a bigger shack. Greetings from the Nederland’s. Henry

@nofiltertv0710 5 лет назад

That thing will eat up all the woops bumps jumps dunes mud rocks what ever you through it at you built a dessert racing machine right there I feel your under estimating your self and build that thing is sick I love it and can't wait for the next vid on it keep up the Awsome work

@visionoffroadcustoms6713 5 лет назад

Windrock Park would be a good place to go. All the G trails are gravel. Semi flat and long straight aways on some. There’s a few other easy dirt trails that you could take it as well.

@Nevertrustalawyer 5 лет назад

Yep! Honda’s legendary parts support. You were lucky on that gear. If you keep adding steel, you might want to make it a twin engine.