How And When To Replace Tyre Sealant In Mountain Bike Wheels | The Tubeless Refresh

Подписаться 482 тыс.

Просмотров 175 тыс.

50% 1

What are the benefits of tubeless? Well, you can expect a smoother ride as you are able to run lower tyre pressures without the risk of a 'Pinch Flat' (pinching your inner tube). The sealant will keep you puncture-free on most small holes! They also have less rolling resistance due to the lack of friction between the inner tube and tire casing 👨‍🔬. As the sealant drys up or is lost through holes you will need to replace it. In the video, Henry shows you how to refresh your tubeless setup!
Would you borrow a wheel off Blake Samson? Let us know 👇
Subscribe to GMBN Tech: gmbn.tech/subscribetogmbntech
Pick up official GMBN merch: gmbn.tech/tq
Follow us on Instagram or Facebook! @gmbntech
Please submit your content to our uploader: upload.gmbn.com/tech we love to check out what you have been up to and may feature it on the show!
Watch more on GMBN Tech...
📹 gmbn.tech/HowToConvertToTubeless
📹 gmbn.tech/TechShowPlaylist121
If you'd like to contribute captions and video info in your language, here's the link 👍 gmbn.tech/to
🎵 Music - licensed by Epidemic Sound
National Anthem Sweden 8 - National Anthem Worx
Dance for You (Instrumental Version) - Revel Day
#GMBNTech #GMBN #MTBMaintenance #MountainBiking #MountainBike #MTB #BikeLife #Cycling #BicycleMaintenance
Brought to you by the Global Mountain Bike Network (GMBN), GMBN Tech delves deeper into the bikes, kit and technology that powers your rides!
Our mission is to help you discover, dial-in, and get the best from the latest cutting edge bikes and technology available.
If it’s off-road tech you’re after, look no further! The weekly GMBN Tech Show showcases the latest and biggest tech stories, with more besides.
Fancy some factory tours and first looks to keep you informed of how the latest tech has arrived, as well as what they do on the trail? You’ve got it. Want some in-depth maintenance videos give you the knowledge to set up, look after and upgrade what you’ve got? Yep, we’ve got them, too. Lots of ‘em. In fact, our presenting team consists of bike industry professionals with decades of experience of wrenching, writing, and working at the cutting edge of mountain biking so we can keep you informed, entertained and engaged with all the tech that drives mountain bikes forwards!
Thanks to our sponsors:
Canyon Bikes: gmbn.eu/Canyon
Nukeproof Bikes: gmbn.eu/nukeproof
Pole Bikes: gmbn.eu/PoleBicycles
Park Tool: gmbn.eu/ParkTool
POC helmets and eyewear: gmbn.eu/POCsports
crankbrothers pedals: gmbn.eu/crankbros
Ergon: gmbn.eu/ergon
Vittoria Tires: gmbn.eu/Vittoria
FSA: gmbn.eu/fsa
e*thirteen: gmbn.eu/EThirteen
Topeak: gmbn.eu/topeak
Garmin: gmbn.eu/Garmin
Muc-Off - gmbn.eu/Muc-Off
Mavic Wheels: gmbn.eu/Mavic
crankbrothers seatposts: gmbn.eu/8b
Douchebags: gmbn.eu/Douchebags
Facebook - gmbn.tech/gmbntechfb
Instagram - gmbn.tech/gmbntechinsta
Twitter - gmbn.tech/gmbntechtwitter

Спорт

Опубликовано:

1 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 152

@kpflugshaupt 4 года назад

How to „de-Blake“ a wheel… 🤣

@headoverbars8750 4 года назад

"... then go to town, But not really, we're in lockdown you sausage! That was hilarious lol,... Henry 🤣😜

@cccpkingu 4 года назад

Ya sossig!

@hubdeep9452 4 года назад

I haven't changed the Stan's sealant in my tyres for 10 months. The other day I pulled a thorn out and to my relief it still sealed. They're not even tubeless rims 😅

@davidmorris8121 4 года назад

My first tubeless set-up was with a set of Bontrager XR2s, with Stans sealant. They lasted 3 years, & only punctured ONCE, when the tyres were COMPLETELY worn (rear)! Tubeless has been mega for me, & is worth all the faff to set-up!

@rdx1419 Год назад

XR2s scare me. I have crashed more in my three months of owning those tires than I have in my whole 4+ years racing

@rupedog 4 года назад

Love the comedy metaphors!😁

@jcsrst 4 года назад

Thanks for the vid! Boy oh boy muc off is making their presence known on the internet.

@grantwallace1882 2 года назад

This is exactly the video I needed. Thanks GMBN.

@Philatlondon1 Год назад

Really helpful. I've just gone tubeless on some 'tubeless ready' Racing Ralphs. They were so floppy on the rim it was impossible using a track pump and I had to buy a new pump, use a couple of extra wraps of duct tape over the top of my Muc-Off tape. And they seeped sealant from the side walls, so not convinced of the tubeless ready claims. However, I've left them 24 hours and they seem to be staying up now. I hope the effort is worth it.

@kevinbowe 4 года назад

I have never heard of Glue and Sealant Remover. Thanks for sharing. -- I have a 'mess' the previous owner made. This product will help me out. -- The bike has a set of tires/wheels, that the previous owner, set up tubeless but they simply leak air no matter what I try. -- I intend on converting them back to tubes and use them for commuting. This product looks like it will clean the wheels and tires so I can install new tubes in a clean tire/wheel. No nasty/sticky leftovers.

@JK-ki7yv 4 года назад

One of the best vids. 👌

@johnmartin227 4 года назад

Why does Henry's place look like a care home? What're you paying him?

@the_spanner_ch7mp 4 года назад

Great stuff Henry From now on I'll use the phrase I'm De-Blaking my wheel/tyre 😂 👊🤘

@johnreese3762 10 месяцев назад

Thanks, I needed that!!

@ltrtg13 4 года назад

So far I have kept my tubeless sealant in my tyres by not puncturing and not using my bike as much as I have done. Finally converted to tubeless. Not long before this frigging COVID19 lockdown.

@karsonranck6185 2 года назад

This guy was fun. Great to watch 👍🏼

@TrailPOV 4 года назад

Love the comedy throughout!!

@smokedsalmon3907 4 года назад

I just continue to add sealant to the old dried stuff and add more pieces of tape over any sections that don't look good. This seems like the smarter way to do it.

@khchoi2012 Год назад

That means eventually you fill the whole tyre with sealant!

@tyrionas 3 года назад

i just cleaned up my tire yesterday off the dried out sealant without using the glue/sealant removal spray, it was a nightmare but managed to seal the tire nicely.

@BushcraftAI 2 года назад

I love you guys contents with the sense of humor : )

@ivanperica3731 4 года назад

I usually paid 1.5 € for a valve core this ebay tip never came across my mind thanks my dudes!

@villimagg 4 года назад

Henry has the most valuable videos!

@gmbntech 4 года назад

Glad you enjoy them Villi!

@rupedog 4 года назад

I just scoop out the old sealant from tyre I'm taking off, pour into tyre going on, top up a little (10-20ml) as necessary, wipe clean inside old tyre with a rag. Simples! But thats because I use Slime STR premium tubeless sealant... doesn't dry out between twice yearly seasonal tyre swap, so unlike all the latex with ammonia based ones, zero maintenance! And co2 safe!

@inthehead1763 4 года назад

Noice. Im off to the shed to do this now....cheers

@TheKingsteez 3 года назад

Figured it out

@povteer 4 года назад

exactly the video i need after 2 months of home quarantine bike is stuck, probably need to check the sealant

@keananconnor4221 4 года назад

Legitimately this is the how to I asked for

@DaveWorld 4 года назад

Nice tyres

@larshalstrom3223 4 года назад

I've used a rubber racquet ball and rubbed off the sealant off the beads in about 15 minutes with it.

@khchoi2012 Год назад

I've just tried a normal hand washing nylon brush this afternoon but ended up with a wire brush to remove any congealed sealant on the inside of the tyre.

@okidoke4822 3 месяца назад

"Deblaked" i like it.

@liammcbride4236 4 года назад

I gotta try the crocs one day.

@turbochicken80 4 года назад

nice

@daddymonmon1 3 года назад

Hi. I bought a specialized pitch that I had setup tubeless and I have been using it as a commuter bike to work with the occasional leisure rides for 6 months now. I live in the Philippines where its either hot or wet. Can you recommend when is the good time to do tubeless maintenance? thanks

@joseph-the-seventh Год назад

Do you need a special pump to seat the tubeless tires? Also wondering, my RaceFace rims came taped from the factory. Should that tape be removed when cleaning the inside as shown in this video, or can the factory tape stay in place and reused?

@EpicEvolution 4 года назад

Tip for weight weenies. One of my friends invented this. He set up wheel with inverted tyre and camera and then inflated it. If you do so, it's much more easier to get out old sealant using sand paper.

@peterlang5047 4 года назад

Всякие байки oh so inflate the wheel inside out just to get the sealant off? That’s pretty smart

@tychoMX 4 года назад

That's pretty clever. I try to clean up CX tires from last season and they are sometimes a mess.

@porroco 4 года назад

I had a punture on my new maxxis DHR tubeless set up with sealant, need to know if i want to keep using the same tire do i need to go now with tube?

@geemail369 4 года назад

Never had any problems removing sealant residue with a little of water+brush scrubbing and finger rubbing.

@paulsack9563 4 года назад

What kind of sealant are you using. Tried it once and I lose more skin on my fingers than rubbing of Stan's sealant.

@Hunter_Bidens_Crackpipe_ 4 года назад

I make my own tubless valves with schrader valve cut out of a tube and an exterior 7mm rubber o ring between the lock nut and the rim.

@carloswithac 4 года назад

I've done that with presta valves. It was an emergency but it worked, so I kept them.

@paddor 4 года назад

Why?

@th_js 4 года назад

Yeah, why'd you do that?

@RaglansElectricBaboon 2 года назад

Answer to why? Because Schrader are great :)

@lfcgatti 4 года назад

Hello. My question is: How do we clean the sealant glued inside the tire? Do we need to clean it? Thank you very much in advance!

@Ricochetmex 4 года назад

lfcg73 I tried it once and didn’t finish the job, it was too time consuming. Then I read that it’s not recommended because is too difficult, you can damage the inside of the tyres and unplug holes that the sealant has already seal. But I don’t know if that glue remover makes it easier...

@donbenincasa7442 4 года назад

Can you show more detail on how to have less trouble wrestling the wheels off the rim and how to do it without damaging anything :) thanks and cheers

@niklasdr 4 года назад

d. benincasa see my comment to KENNY MTB

@dionneaj20 2 года назад

where in lock down you sosage 😂 that turned my bad day a little bit better

@p0t4toePotato 4 года назад

had put on brand new tires, after 2 weeks of riding the rear wheel had so many punctures that when i changed tires it was completely dry, the front wheel still had a decent amount of liquid sealant. now i managed to spray lubricant on my brake disk and am out of degreaser, gotta go buy a can...

@rp003.0 4 года назад

one of those weeks huh? happens to the best of us cheers 😂

@geraldhenrickson7472 3 года назад

I feel the 2-4 oz recomendation does not apply to any larger mountain bike tire. It offers poor protection and dries out even faster. I use 6 ounces on any tire over 1.95 width.

@joshuamelendez2967 3 года назад

Can I clean the junk in the tire from the dried up sealant. Of should I leave it in the tire

@jackmarshall2535 4 года назад

#AskGMBNTech I recently bought the Trek Roscoe 8 2020 which has Maxxis Rekon 2.8 tyres. I was wondering if it would be a bad decision to change my front tyre to a 2.5-6?

@danielleinad5135 Год назад

Ahhh thanks.. now I get it :D I didnt destroy my inner tube, just the valve. Cause I have the Tyre Sealant in the tyres, which makes it automatically tubeless. But then I dont understand why they let me buy an inner tube, when I dont need them.

@ma14.27 Месяц назад

Just converted a MBT to tubeless for the first time, the rear tyre works perfectly, but the front tyre is losing air through the spoke holes. :( Thanks for the video, I at least know how to fix it now.

@hippymtnbkr 4 года назад

#askgmbntech Is it better to have mtb suspension fork stanchions that are larger? My fork only has 30 mm, and I'm a big guy. Shouldn't a thru axle make the fork stiffer?

@FIGHTTHECABLE 4 года назад

Yeah easy with no cush core inside. Try getting a magic marry tyre off that has wintered in tyre sealant with cush core on a DT Swiss carbon rim. Took me 1 hour atleast to change 1 Tyre. But thanks for that sealant remover tip, I will apply next time

@pickleboy1600 2 года назад

Hey yall so for my tyres do i need to replace the rim tape and do i even need to take it off if im just replacing the sealant?

@richjones2767 4 года назад

The muc off and other valves come with a few different seals, which one should you use, when and why?

@RocketMagnetUK 4 года назад

Depends on your rim profile and the best fit with the valve seal, so take a look at your wheel and/or check out the original valve seal shapes if it came with them. A small patch of innertube with a small hole pushed over the valve before you put it in the wheel can get you by sometimes and make up for a poor seal but this is bodging it. At the end of the day a selection of valves with different profiles is always handy to have IMO.

@AncientGreek 2 года назад

My Tyre still has some old sealant, should i remove it before adding new Fresh sealant (different brand)?

@mtbrider8286 4 года назад

Do you think it's humanly possible to find shorts any tighter? LOL!!! Thanks for the great info.

@jake30966 4 года назад

Hi , I have put gorilla tape and the plastic rim tape on my wheel and blew it up and tested it in bath of water and there's air coming out my spokes , I already had done wheel and it went flat after 1 day and it was same thing air coming out of spokes , what am I doing wrong ?

@niklasdr 4 года назад

So, how were you able to get sealant out from inside the rim? Where the sealant had started to come out through spoke holes and then inside between the spoke holes?

@MTBinKY 4 года назад

That's what I'm wondering, too.

@niklasdr 4 года назад

Bob Baldridge I thought it sounded like he was going to explain how to do this part, but no 😆

@James-dn1hu 4 года назад

#AskGMBNTech my bike has a hollowed out frame and there are holes near the bb she’ll close to the shock mounting point. After washing my bike I have to put it upside down for a bit to let the water drain do you have any tips of what I could do. It’s a vitus sommet if that helps

@retovogler103 4 года назад

Dude‘s funny.

@MJ4183 4 года назад

Does the glue remover work with tyre covered with sealant?

@mortadhaabdul565 4 года назад

Yes

@knlv9672 2 года назад

0:37 with your eyes closed lol

@Bithu 4 года назад

Riding today I lost a load of tire pressure, I thought it was just a big burp (was hero dirt, much more traction and schralps than usual in dry old western aus). Chucked some air in, kept riding, got home and washed bike to find air leaking out between the rim and the tire. There is slight damage to the tire on the sidewall there, none on the rim. Any idea what could have happened before I pull it appart?

@nikounourbakhsh8433 Год назад

My best guess is it was an old tire on top of a big burp cus the bead likes to get wear when the tire gets old and a big burp could pull it off some of the tire. I am just realizing this is two years late lmao.

@jimsec7344 4 года назад

#askgmbntech Is the Continental race king a good tire for hard packed dirt and some street for my canyon stiched dirt jumper??

@peterlang5047 4 года назад

Jim Sec I’m not a fan of continental, but loads of slopestyle athletes use the race king

@keithboone4800 3 года назад

Why not pour it in before seating the tire?

@zsanterre 3 года назад

0:37 same

@lukeshieldsnature 4 года назад

Lol i haven’t put in new sealant in ages bc it’s expensive

@danielg.3992 4 года назад

Is it better to run tubeless if your just casually riding and from time to time somewhat gnarly trails? Or just keep the tube?

@simonarends7802 4 года назад

It's always lighter than an inner tube and you can start playing around with tire pressures even tho you are not getting a lot of flats at the moment.

@TheNicagator 4 года назад

"Blake rides likes it's stolen" oh man had me busting.

@2nd3rd1st 4 года назад

I wonder what a sealant would look like in the wild

@WIPEYOURLENZ 4 года назад

I love how in all theses type of videos they just pinch the tyre off the rim with their fingers. But in reality you end up using a Vice.😁

@niklasdr 4 года назад

KENNY MTB you do know it actually is super easy as long as you sit the rest of the tire in the trough in the middle of the rim bed.

@WIPEYOURLENZ 4 года назад

Niklas Du Rietz Bollocks I have just done both my wheels and that’s the problem getting the first part of the bead into the rim bed. Yes it easy after that.

@niklasdr 4 года назад

KENNY MTB I just did two wheels a couple of days ago and it was easy again. One was a 27 Specialized Butcher 2,8 Grid on a Royal Traverse (29 mm inner width rim) with CushCore; the other a 29 e13 TRS+ rim with a TRSr tire

@niklasdr 4 года назад

KENNY MTB I just put the wheel to my chest and see to that I stretch the tire bead inside that trough in the rim bed. Another way is to use their tip to stand the wheel on the floor and push a soft hammer handle down on the rim with your foot to be able to pull and keep the tire stretched inside the rim trough/bed. And of course where the valve is will always be the last part to put the tire on or off as it would otherwise keep the tire to be able to sit in the rim trough/bed there. Good luck!

@Blakksheap 4 года назад

MultiSeal's FlatOut lasts the life of the tire or 10 years, whichever comes first.

@cccpkingu 4 года назад

Have you used it on a bike?

@Blakksheap 4 года назад

@@cccpkingu Currently using it in my fat tire ebike that I converted to tubeless. No issues at all.

@shiro4585 4 года назад

i love how he low key attack people

@guitarman1234567891 3 года назад

Does that mean you have to de-tape, clean rim, re-tape every 4-6 months then add new sealant?

@jonathanleis8874 3 года назад

No. You dont have to do that. Only if the wheel isn't in use. And you most likely won't even have a tyre on. :)

@philwebb606 4 года назад

Can WD40 be used to clean the old rim tape residue?

@gmbntech 4 года назад

It'll leave a film, also you would have to first remove your disc to make sure you don't get any on that! A few brands such as our partner Muc Off have products that specifically remove tubeless gunk and rim tape stickyness!

@jaythorpe2536 4 года назад

they should have Muc Off as a sponsor..

@ricosuavez_uk 4 года назад

Jay Thorpe GMBN has... 💣

@ka81alex 4 года назад

Almost 6 mins for muc-off commercial.. Nicee..

@peterlang5047 4 года назад

O it was a well done commercial that didn’t feel like a commercial 👍

@ltrtg13 4 года назад

How hard did Blake throw the wheel? All the black rubber has come off the tyre and left those god awful later 90's tyres with the weird sidewall colour. Come to think of it. Doesn't the yellow stripe on Blake's wheel make it a Mavic wheel?

@lukemtb6800 4 года назад

Would you know why my tyre keeps burping? I'm running a michelin wild am 27.5x2.8 on nukeproof horizon wheels 18psi. I'm only 10 stone. Wheels and tyres are both brand new and after a spirited ride I have signs of sealant around the bead. If I put the pressure up it cures the problem but the tyres are way to hard. #askgmbntech

@givemeakidney 4 года назад

I'd suggest you'll need thicker side walls to run 18psi without a tyre liner if you're hitting then hard.

@rupedog 4 года назад

That's very low pressure for that size. Try also adding another single wrap of rim tape if running say 22psi doesn't help. 10st isnt super light, its about low average, especially by the time u add weight of water on bike/urself

@lukemtb6800 4 года назад

@@rupedog most plus sized tyres run around 14 psi

@peterlang5047 4 года назад

It sounds like you’re a spirited rider who rides hard. If I were you, I would probably get a tire insert. It seems like Rimpact is good value

@niklasdr 4 года назад

Peter Lang ...or CushCore.

@rupedog 4 года назад

Or...just use Slime STR premium tubeless sealant and avoid all that cleaning... easily lasts a year even with limited riding, seals great for real world punctures. No faff, simplest least maintenance way for quality tubeless set-up.

@rupedog 4 года назад

Its co2 safe as well. And no ammonia.

@Jocool0785 Год назад

Strap on some Fillmore valves and never look back

@ExcelInstructor 4 года назад

#ASKGMBNTECH - hey guys, oi agree you made so many tubeless - related videos, why not make last one - and becouse some of the stuff is outdated and new tech is going out, new sealents, tyres, tapes and such, why not make 1 new video from scratch using most recent new tyres type new sealants, introduction to 10 most used tubeless kits and make 1 tyre of each kit and compare? like all-in-one full tubless encyclopedia kind of thing?

@ltrtg13 4 года назад

It's always puzzled me. Is there a "clockwise" and "anti clockwise" for digital clocks and watches?

@charlieroberts3171 3 года назад

Ive had tubeless sealant in my front wheel for 2 years and it still hasn’t dried out😂

@MtbEMS 3 года назад

What’s the weather like in your area?

@charlieroberts3171 3 года назад

@@MtbEMS wet, rainy and muddy in the winter. Can be super sunny and hot in the summer

@MtbEMS 3 года назад

@@charlieroberts3171 hmm interesting, same here in Ecuador.

@charlieroberts3171 3 года назад

@@MtbEMS i used Stans no tubes sealant. I recently had to change it as i was changing tyres.

@DirectorLJ 3 года назад

Skip to 2:00 where anything useful starts to get said.

@jussitanskanen3583 4 года назад

Pressure washer

@harrybryson1130 4 года назад

#askgmbntech I have a trek marlin 5 (small size) and I am looking for some budget upgrades to it around £200. I know about the handlebar adjustments but are there any good ways to go 1x with a big cassette or any good rockshox forks that would fit my bike. I know there is discount at chain reaction right now and it’s my birthday coming up soon so a quick response would be greatly appreciated. Also, I have noticed a few forks that are 140mm (my bike has 100mm right now) is that too much of a jump in travel? Help me out here Doddy love the videos! xD

@lancekiroha9768 3 года назад

hey im denis,what if my tyre gets flat and i dont have the fluid?what else can i use for emergency

@RaglansElectricBaboon 3 года назад

Carry a spare tube

@tigerbalm666 2 года назад

"Tubeless" unless u r a pro, BIGGEST HYPE in the last 5+ years! More hassle and $$$ than worth. I change my mtn bike tires and tubes at least every 2 years...never had a flat. No muss no fuss!

@williambenitez5908 10 месяцев назад

No issues with assembly for me ru-vid.comUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L but I could see where some might benefit from using an experienced bike assembler/mechanic. I'm an older rider starting back after a 10 year break. This bike exceeds my capabilities and has been easy to get comfortable riding. I'm mostly on easy trails with almost no street riding and have not been disappointed with the performance of the bike. My fitness level is far below what I previously rode with and because of that the mileage is going on the bike slowly. While I'm losing weight slowly, the bike seems to tolerate my 220 pounds just fine. The bike has been used by several family members ranging from 5'5" - 5'9".

@carlingas666 Год назад

Not the same wheel that was tossed.

@LtEdPell 2 года назад

Blah Blah Blah 2:03 Useful information.

@Canigetanawwwwyyyyeeeah 2 года назад

In good ole procrasination fashion. I accidently left mine in for a year....🤦‍♂️ you wanna see how dry it was. So much cleaning. Days. Never again. Let my failure be a lesson folks. 🤣🤣

@carloswithac 4 года назад

Henry, you sausage!

@jodelboy 4 года назад

replace tyre sealant? nope, just chucking a bit of water in the tyre every now and then.

@SnootchieBootchies27 4 года назад

Very interesting. Does this actually work? I mean, it makes sense

@jodelboy 4 года назад

@@SnootchieBootchies27 works for me on my 24" drilled trials rims

@SnootchieBootchies27 4 года назад

@@jodelboy Thanks man, I might have to try this next spring.

@jodelboy 4 года назад

@@SnootchieBootchies27 NEXT spring?

@SnootchieBootchies27 4 года назад

@@jodelboy well, I already just put in new sealant this year

@londontrialscat 2 года назад

Mucoff sealant is junk...failed me on both tyres

@spfttt 4 года назад

The answer to this question is: NEVER. Because, you want to never put it in in the first place. Sealants like Slime etc. were NOT intended to be used as preventatives. They were designed to be used only AFTER you get a flat, as a way to get going again quickly. If you just dump Slime in your tires, it will eventually get into the air valve. When you add air to your tire and open the valve, if some slime gets in there as a bit of air escapes, it will dry in there, and prevent the valve core from closing completely. You will have a slow leak. Very few people suspect a leaking valve core and will be puzzled for quite some time, looking for a leak.

@tychoMX 4 года назад

Respectfully disagree. Even Slime does - which is why they sell you Slime inner tubes preloaded with the sealant inside.

@spfttt 4 года назад

@@tychoMX - THAT does NOT mean Slime doesn't jam valve cores. I am not the only one who has had the experience. I am speaking from FIRST HAND knowledge, not speculation.

@519348 2 года назад

Didnt finish make me crinch

@tfmaus 4 года назад

I despise this Henry guy...I can't help it...it's stronger than me...and I don't know where it comes from

@sfer1 4 года назад

It's probably the fact that he doesn't seem to know much, but he acts like he's an expert mechanic.

@uclajd 3 года назад

Unfortunately Muc-off doesn't sell that glue remover in the USA. Our ecology religion is probably the reason.

@dfcnt1625 17 дней назад

This guy lost my interest in 10 seconds, speak up man!

@MartinTeerly 4 года назад

It's time for unsubscribe. This videos turned in one big advertise 🤷🏻‍♂️

@DirtSailor5 4 года назад

I'm not going to unsubscribe but it is getting harder to tell what they like verse what they're paid to say they like. You give Doddy a turd and he will point out how spectacular the bits of corn look and compliment the time it took to get all the details just right.