HOW I RESET SOFT CODES ON FORD VEHICLES ABS, TRACTION CONTROL, ADVANCETRAC WITH OUT SCAN TOOL!!!

Подписаться 104 тыс.

Просмотров 612 тыс.

50% 1

THIS VIDEO WILL SHOW YOU HOW I RESET SOFT CODES ON FORD VEHICLES ABS, TRACTION CONTROL, ADVANCETRAC WITH OUT SCAN TOOL!!!
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
Disclaimer:
Warnings And Caution
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 375

@sharonholcomb2377 2 года назад

You are Awesome! This fixed my abs, brakes, traction control, cruise control and collision warning lights reset. Mine was working, went in a store, came back out and all my warning lights were on. Thank you, thank you, thank you! Mine is a 2013 Ford Edge!

@Subhi.Ashour Год назад

Do the lights back on again after resetting, for example after days or weeks?

@MrMcelbee 6 лет назад

YOU ARE AWESOME, YOU ARE THE ONLY RU-vid VIDEO THAT ACTUALLY WORKS ON THIS ISSUE, I THANK YOU SOOOO MUCH, I DID BOTH MY VEHICLES. KOOL!!!

@jaredblau4233 4 года назад

Thank you so much! Tried this today and it worked. Can’t thank you enough as I needed my car today for a minor emergency. Woke up to a message saying low battery and had no power steering etc. Your video was very easy to follow and understand and saved me....from crying. A thousand thank yous.

@monogee 5 лет назад

MY MAN, THANK YOU SO MUCH!!! Ford would have definitely hit me in the head to reset this.

@kimkartrashianstopmakingst9060 5 лет назад

Nice detailed step by step instructions George! Thank you.

@abdulrahmanalsaati5621 2 года назад

I would like to thank the person in the Video for his nice explaining with many info about this matter, I tried today for my 2014 Ford Edge, and it works!! Thank you again for sharing ur knowledge, u saved my time n my money, God bless u. :)

@brettstooltutorials6017 2 года назад

Fantastic, I had both lights come on the night before the car was due to be picked up after selling Tried this with the Positive lead Left it while had dinner, reconnected and it worked, didn’t lose radio stations etc Ford 2009 Mondeo

@dansmit9051 2 года назад

Thank you So much worked on 2015 Focus. And I'm kinda broke, saved us 135.00 bucks

@Amen.22 Год назад

I have the same car, so I’m going to try this.

@tellyyoung4571 2 года назад

Will be trying this tomorrow one I repair my front passage tire! Thanks for helping us out!

@filmonberhe2238 5 лет назад

Thanks man, u saved me a lot of money. They told me ot will cost over 1000 to fix this problem. NEVER TRUST A mechanic

@wengdivinaflor9576 3 года назад

Same here in the Philippines they cost almost 69 thousand pesos. I will try this. I don't know about car I just drive , until I need to search about this ABS MODULE , because the Ford casa will pay me a lot of money .Thank you George.

@bongsoliven7822 2 года назад

@@wengdivinaflor9576 kmusta po? Effective po ba aa inyo? Sa akin tinesting ko ngaun pero ganun pa din. .may abs, hillstart assist etc nakailaw pa din 😔

@alexgonzales8859 2 года назад

@@bongsoliven7822 hello bong sakin umilaw sya while driving. then pina scan ko. u3000 lumalabas sabi nila abs module daw. na fix na ba sayu?

@Kai-rq2ci 2 года назад

Thank you so very much!!! It did the job. Saved me hassle, time and money. Much appreciated!

@jrhong517 11 месяцев назад

Thank you. I fixed my 2014 taurus 2.0, with traction control not available, adaptive cruise control not available through your method. Being no key start button, I pushed button without pressing brake pedal. And I took the neg terminal of battery for 5mins. It fixed. 😃

@nelsonmongiovi3539 4 года назад

Awesome. I couldn’t reach negative terminal, so I disconnected positive. Worked. Thanks. Great video.

@user-ci5oq6kn7y 3 года назад

Thank you very much, I have had exactly the same problem but after I tried that way. problem is solved and everything is going well.

@alamocityshuttle 5 лет назад

Thanks this worked on my 2011 ford e 350. At first I tried the 5 min idea but it didn't work , on my second attempt I did 10 min and so far advanced tracking signals are off. Thanks for the video.

@original2858 5 лет назад

Did it stay off? The first attempt it didn't work but try ten minutes and it worked for you? In about to try and want to make sure i do it right the first time.

@radz35 6 лет назад

Thanks this worked on my wifes Ford Fusion. lights came on after the battery went down and had to be boosted off. The power steering stopped working. After we did what you said in your video everything returned to normal and I am sure saved a costly repair bill Thank s again

@ThekidGQ1 6 лет назад

radzney white Hey bro. I have a fusion as well. My advanceyrack and power steering lights cams on. You said this worked for you right?

@ashstackz 6 лет назад

My power steering light came on with the Avancetrac light but I was driving and lost power steering I wonder if that will work.?

@dallasneugebauer97 6 лет назад

radzney white did it work? My advance power steering came on and power steering stopped working as well. Did this method work did every thing go back to normal?

@original2858 5 лет назад

I have a 2010 Ford fusion. I had a sensor taken out of my tire . Ever since my power steering service now and advance Trac popped up. Also saying tire pressure sensor fault. I replaced the power steering because it was so hard to drive. Got it back three days later. Drove home working. Bam by the time I got home it locked up again. This is 45 min later. I know my power steering doesn't need replacement. I just got it fixed. Something is throwing it off. My car even stalls when driving. Tires spin and want go. It jerks back. I cut off and back on then take off. Some times, well most of the time I have to keep doing it. Horrible! If this can reset on my fusion power steering and advance Trac then I will be saved from money. The replacement of the steering broke me. I have no more I can do with this car. Please let me know how your fusion is doing and If this is what you were going through. If this helps for real I will be so happy!

@SuryadevaraRammurthyNaidu 2 года назад

@@original2858 bro did it work for you. Please let me know I am facing the same issue

@seahwch4835 3 года назад

Thanks. Great. Had the same problems... abs lights and front airbag light came on and off on my 2016 focus Titanium saloon. I just followed your instructions,but instead of disconnecting the negative terminal, I disconnected the positive instead...for ease of access. Drove the car for a while and the lights didn't come on. Acceleration seems smoother.

@alphaxray100 3 года назад

I been having this problem for ever, I’m gonna try it right now

@psnauspuff 3 года назад

Genius! I feel the same way about mechanics, and I am one... now days they don’t FIX anything, just know how to replace.

@iannluci 4 года назад

Just want to say thank you !!!!!! 2014 fusion with ..advanced track n steering fault light on.....and no pwer steering....this worked !!!!!! Hopefully buys me time till i can get rid of this nightmare car

@htc5972 3 года назад

It's happening on my 2014 fusion as well When it happens my steering wheel gets stiff and when the lights go off it returns to normal Was your fusion push start ?

@iannluci 3 года назад

@@htc5972 no mine has key start

@iannluci 3 года назад

@@htc5972 I will never forget the day this happened...was at work 100 miles from home...and of course a blizzard dumped 9 inches of snow in a few minutes...I drove car whole way home with power nothing....but did this...and it reset everything...and car still runs great ...never happened again

@htc5972 3 года назад

@@iannluci Damn that sucks it also sucks that mines push start so I'm not sure if it'll work the same.... but I'll try and do it anyway

@iannluci 3 года назад

@@htc5972 keep me updated....I hope it does.....

@ogieabanilla3257 Год назад

Fantastic. Worked like a charm. Thank you.

@lenrule1751 4 года назад

Great info. Thanks

@user-ce5yc3ow3p Год назад

I tried this three months ago,and it worked, now it comes again.... Can't endure the repeated flopping, so I tear up the speedmeter and kill the horn and three smd lights (track,brake, abs). Now, deaf and blind are better 😄😄

@fastedjuan247 5 лет назад

Thanks so much! I will try this! We had bad weather recently, car drove fine! Started it today and all those lights were on. I'm thinking dirt and slush got on a sensor?

@DavidSantos-ec9lb Год назад

Thank you!! Yes it worked you saved me money. It was simple easy

@davidpena1228 3 года назад

Great video, did the trick!

@PreetSingh-rr2ms 4 года назад

Thanks mate! You saved my money! It worked with my Ford Fusion 2013....👍🏻

@desibazer6430 3 года назад

I have a 2012 Ford Fusion and when I disconnected negative the ignition and everything shut off

@lenovomonos5232 2 года назад

Bonjour j'ai le maime problème c quoi la panne svp

@deuceliter 4 года назад

Will be trying this today, thanks for the help!!

@user-wy3pj7lp3y 6 месяцев назад

Por cuanto tiempo se desconecta

@waynesalekin4737 Год назад

Super grateful! Thanks very much. This was driving me nuts.

@royzwerneman5680 7 лет назад

I owe you a beer. Thanks

@alex1988andr 3 года назад

Thank you!!! God bless you

@wangwan3856 2 месяца назад

your theory is totally works, i have fixed hill assist issues on my fiesta ecoboost. hopefully can last longer, hate when abs indicator appeared

@IREBey 7 лет назад

Thank U! 👌🏾✊🏾

@ShonEpps 5 месяцев назад

I TRULY APPRECIATE THIS VIDEO!

@STmobitv 4 года назад

Good jobbb brooo

@Left-Foot-Brake 4 года назад

Worked pretty good

@ovidiumarian6719 3 года назад

I do this and is working. If isn't working do 2 time's, control the fusses, somewhan can't fuse making this kind of hack, if dosint work control or change relais. This problem had cum when I had cleaned the contacts of the fusses and relais. Thank you for the video is very good an save all for spending money.

@jjfelan541 4 года назад

I did the same on 2018 Ford Fusion S and it worked just as good. Couldn’t reach the negative terminal to disconnect so I did it by doing it with positive. Must work for all fords. I did have a 2017 F-150 STX that would malfunction and the method I used for that was master reset the head unit( radio)

@mancuso9090 Год назад

Thank U so Much Bro. easy and fast solution ..Thumb up.. U made people smile.

@nicholasparsons5254 5 лет назад

Going to try this.thanks brother

5 лет назад

You are a genius

@beenu12100 7 лет назад

Thank you!

@ivsyw0415 4 года назад

I have three light on: engine, tire pressure sensor and ABS. Also, the fuel inlet message on. I use this method, for 5 mins. When the power on, the engine light off and fuel inlet message gone. Amazing! Thanks!

@jessilee2106 Год назад

What about the tire pressure light?

@laxcker 3 года назад

2011 Escape worked like a charm

@javajive9605 2 года назад

Thanks for share, big appreciate bro...

@jasmineperez0928 5 лет назад

This saved my wallet!!!! I tried this on my 2013 Ford Fusion and it worked!

@ronniemassart3834 4 года назад

What all lights were on. I have 3 lights on on my 2016 Fusion along with Beeps every time I start it. I have to keep hitting the ok button to stop the Beeping

@bastiansnow 4 года назад

@@ronniemassart3834 Did you solve it?

@ronniemassart3834 4 года назад

@@bastiansnow No,I think it's going to have be fixed by taking my wallet out and paying a professional with high end equipment but I'm such a tight bastard and been off work for 5 weeks and counting so the wallet is thin

@teguhgpmr132 Год назад

Thanks for Your Tips. It's working. Good Jobs 👍👍. Salam from Indonesia

@ScriderMT 6 лет назад

does this work when the immobilizer is in malfunction?

@RenegadeSlayers 3 месяца назад

Thank you for the video

@Dallas_Tx_Boy214 7 лет назад

Hey George I have the same problem with a 2012 Hyundai Elantra limited my traction light stays on when I turn the car on can u give me some pointers. It's also a push to start. Thanks in advance

@1albertberman 6 лет назад

will this procedure turn off the SRS light on 07 fire focus after repairs are made

@emerieremoroza4066 2 года назад

Nice bro im gonna try it tomorrow hopes it works

@jameslatimer1432 2 года назад

Cool vid 😎 👌

@cabhaveshthakkar6239 3 года назад

George, I tried twice with positive and negative cords both, but it did not work. I have ecosport 2013 diesel model. Had already changed Right Rear speed sensor (as per scan report) (ABS) but it was showing same malfunction ABS service error. My car is keyless. But pressed once without using foot . Fruitless. Just a small query , do I need to press brake padels after removing battery cord.....? When I rejoined battery, it did not get all icons back , so pushed power switch again.

@ryanmccormick 4 года назад

Hero!

@BoogieDown1 3 года назад

Thanks George

@matbekensad7078 5 лет назад

ty bro......

@ChristyKrohne 2 года назад

What do you mean by Hard Code? By the way, my Odometer/ Speed Needle is also not moving to show what speed I'm driving.

@WF-ww2rw 3 года назад

my ecosport has break malfunction, ABS and hill start assist malfunction on the message. I tried the Hill Start Assist and it didnt work. If I restart my car with your method, Will it fix the functional problem too? Or just reset the light indicators. Thank you!

@nailaamalia4309 4 года назад

My Fiesta yesterday replaced the broken left lamp ball. Must open the battery and fuse box. Then ABS indicator appears, hand brake lights, and traction control. is this method useful for removing ABS lamps??

@tmikey12126 3 года назад

THANK YOU.

@trentbutler8658 3 года назад

Thank you soooooo much you save me 2k

@norbertdx Год назад

Have a 2017 expedition that just threw the same codes and no power steering. I had the same Idea of disconnecting the battery but didn't know about leaving it in the "on" position, will try it again. thanks

@19Dennis53 2 года назад

I don't know how to thank you for the info on this video. My whole problem turned out to be the way I was rebooting the system and the key was the answer. I started off by changing the battery ($200.00) because the one they sold they car with was just a $60.00 car battery AND it said they battery wasn't being charged. So actually, I needed to do that in good time anyway.

@ccjcm 7 месяцев назад

Thanks a lot. But I have a question. After this procedure the abs an tract system restart to work normally? Because now my panel says : low oil level. But the oil is ok.

@iyadh.2060 Год назад

thanks for the video ....... I hope it will work with my car, i will try it tomorrow. .

@mariolopez1 3 года назад

Thanks 👍

@juanaviles1649 28 дней назад

I removed the ABS harness for the abs do you think your method here would also work on a 2011 Ford F-150 XLT. I was replacing a brake line on the ABS and a removed it knowing I should have removed the battery but now I'm having all these lights same as you lit up my dashboard..

@kevinkornman 2 года назад

Does it have to be the - (negative side) or can it be the + instead? thanks

@mikmykzdecastro1581 7 лет назад

Hi my ford fiesta 2011, has a check engine and transmission mafunction light and warning after i changed my battery. Do you think this will help?

@johnkohler8926 5 лет назад

THANKS SO MUCH THIS ACTUALLY FIXED MY POWER STEERING!!!! Jumpstarted car and after it started told me power steering, steer assist, traction control, abs, hill assist all of it needed repair. I thought I fried the chip. Power steering was actually out. Unplugged battery 5 mins and everything is running great! I OWE YOU!

@andimakka9138 3 года назад

Thank you boss

@thoughts8425 7 месяцев назад

What about a push to start ford? Does the ignition still remain in ON mode when you disconnect the battery?

@lego4virgo 6 лет назад

How does one know the diff between whether it's a soft code vs a hard code? I think this happened when Pep Boys replaced my two front tires..came on after they were finished.

@ThePapichulo1117 9 месяцев назад

How do you keep it on the on position if you have a push to start that wound stay on on position when you plug the terminal back?

@qunischannel5321 6 лет назад

George Melnik i did this and the abs and traction control still appear. Does it mean i got to solve the hard code? What does hard code means? I mean what are the hard codes?

@rommelf.calvario9815 Год назад

Hi, will this work to Ford Ecosport 2017 model? Please advise. Just today I have problem with ABS Malfunction. Please help.

@jorgecasupanan5603 4 месяца назад

Thank you.

@marcoolivares3650 4 года назад

So I replace the radio to aftermarket, and I didn’t plug airbag passenger side light because I don’t have anywhere to connect it this is the light that tell me passenger airbag on passenger airbag off, do my ii think it will reset this?

@joseherrera9207 4 года назад

Grasias amigo thanks my friend.

@steved8714 3 года назад

Grassy ass indeed

@Anonymous-it5jw Год назад

Thanks!

@tommyemery4764 Год назад

I was really hoping this would work on my 13 Fusion… have the same lights plus airbag. Replaced a wheel speed sensor and they went out for a week and they came back… did this HOPING and still on. Looks like I gotta dig for the issue. Video was very helpful though, straight forward.

@flaviog5285 Год назад

Have the same issue with my 13 mkz. Was told abs module

@andriesusanto1527 2 года назад

Is the U3000 error code a hard code, should I replace the abs module?

@pakoobregon2880 2 года назад

Thanks bro

@mohammedishaq2878 2 года назад

Will this be able to pass my smoke check after resetting the hill assistant?

@samimohammad8628 2 месяца назад

Great Boy

@biancavenegas757 Год назад

Hi George. Will this work on push to start 2019 ford Fusion hybrid ?

@stacymoseley907 Год назад

Can you tell if the dealership actually change out the hillside start sensor

@dinakarsoul 6 лет назад

Very cool....good video👍🏻👌

@enricotobing1844 2 года назад

Awesome! I will try this procedure on my 2011 fiesta S 1.6. Hope it works. Thanks!

@herriwibowo6625 2 года назад

Kasih tau hasilnya bro,, padahal dah ganti aki masih aja nyala, engine check juga ikut2an muncul, sempet GAS gak mau respon 😢

@mashadiize Год назад

@@herriwibowo6625 gmn sekarang kondisinya? apakah sudah ketemu solusinya?

@herriwibowo6625 Год назад

@@mashadiize , ganti TCM, untuk ABS masih fail , tapi ane pake aja, sempet bawa mudik ke Tangerang Jateng PP , aman

@mashadiize Год назад

@@herriwibowo6625 nah..rencananya mau dibawa jkt-jogja cuman kalo ane indikatornya kedap kedip doank pas rpm rendah.... ada yg saranin ganti kampas rem..udah coba ini om?

@herriwibowo6625 Год назад

@@mashadiize ane sudah bawa ke bengkel om Reva dan mastercars, hasil Scan module ABS fixed rusak ( fault cide gak bisa di hapus), tp setelah konsultasi masih aman di pake asal jgn ngerem secara mendadak, sampe saat ini kadang masih ane bawa ngebut tol bsd-Pamulang 120-150 kpj

@chrisjames_2⁰24 Год назад

Just seen another post where one person turned the key on (not the ignition) and stepped on both the brake and the accelerator for a couple seconds and that turned the engine light off. I haven't tried it cause it's 2:17am, it's blowing and it's damn cold outside.

@AMO24739 5 лет назад

Dude thanks! I'm gonna try this tomorrow. Will let you know if this works.

@ali.tiktib 4 года назад

Did it work?

@nailaamalia4309 4 года назад

Did it work

@oisindoherty2082 Год назад

Did it work

@jspeeder123 6 лет назад

I dont know if you or anyone could help, when I lock my car I get a weird beeping, I used forscan like 2 weeks ago to turn on auto-locking, it popped up with immobilizer failed please service then it went away and it's not showing that message again, I dont know if I should try this method... it's just a loud beep when locking my car like Beep, Beep, BEEEEEEEEEEEEEEEP, Beep, beep then stops

@BillyDsSlotChannel 4 года назад

Will this work on a hybrid?

@dyeynuevediyes 3 года назад

Awesome video. I have the same issue but I have a push start titanium so it didn't work. lol. maybe you know how I can do that on mine? Would appreciate the help.