How to Change a Dodge Output Speed Sensor 

Thanks for the video.. now you showed exactly what I explained to the service advisor.. friggin idiot told me that I didn't know about my truck .drove 48 miles hwy speeds 70mph no problem .parked Vehicle for about 30-40 min.restarted Vehicle would not shift out of 2nd on a hot engine after stopping .Engine would not reave even though I had my foot to the floor. No check engine light.was only able to drive 30 mph ..But after sitting overnight transmission shifted perfectly. .. I told service advisor to have tech check input and output sensors prior to running a transmission test. Just because I am a woman he thinks I am a idiot. Was a tech for decades when I was young and cute haha now gray and old mist be dementia. Glad you put the video out proves me right. Your Awesome. 😮

Thank You! Just got the part today and looking to replace it once I'm off work, this video really helps me out a lot! Running a 98 grand Cherokee and excited to get her back on the road.

For those interested. I believe the socket size is a 25mm metric but a 1" standard depth 12 point socket works. It's just a little loose but does the job.

Informative, short and to the point good vid, Thank you.

Thank you man. You're good at explaining and making it easier for others. Keep up the good work. 👏👏👏

THANK YOU! You described my car to a tee! You are the best! Keep making video's!

Cool Dude! We like the very same era of Chrysler's vehicles! Also, I prefer the mid-1960's-1979 Mopar cars & truck too. Have a '98 second Gen. RAM 1500 5.9L Magnum 5.9L + a supercharged 2003 Jeep TJ Sport 4.0L and 5-speed here and this video is fitting to the RAM as this explains a lot in simple terms & to the point. Great Video...Thanks!

When you disconnect the battery the check engine light goes off because you cleared the codes not necessary because you fixed the problem.

I like the 2ng gen dodges too. They're my favorite. I got a 2001 Dakota sport single cab with the 3.9 in it. It's blue and black. Beautiful lil truck.

does a 2 wheel drive Jeep Grand Cherokee Laredo 1999 have also a input speedsensor and if so where is it located, pls?

If a decent bit of transmission fluid comes out was the fluid level just too high? Do I need to put more in to replace what I lost or will it be fine? Thx

Thanks I like this video. Simple!

I have a 99 ram 1500 5.9 and the wires got ripped out, bought a new one from autozone with orange and blue wires. Which wire goes to which side of the plug? It has only two wires but need to know which one goes to the stock wiring. Pleas help and thanks in advance and appreciate you sharing the video.

Hi there, I have a Dodge Ram 1500 3.7L with Manual transmission and I have a speed sensor code on it but i trying to located it, can you tell me what to look for? Thanks on advanced and great video .

Good video thanks for it!

Great video

Could you possibly tell me where the output speed sensor is on a 1998 Dodge Ram 3500 van

I have an 02 Dodge Durango the speedometer doesn't work is it the oit put speed sensor also

hey ron the chime bell dings constantly while truck is moving stops when i come to stop no warning lites come on every thing works .i drive an 02 Dakota 4.7 v8 automatic model slt 2door any thoughts?

I've seen alot of videos and your good at this! Just some advice for next time, it would be nice to if you would explain what size socket (unless I missed it) why you waited to turn it over and what are you looking for that changed while taking it for a test drive (if anything else besides the light) Other than that! Keep up the good work, seriously!!

What size socket ? Did the new one come with a magnet or do you re use the old magnet ??

I am driving a 01 Dodge if this goes bad what all will it cause the truck has a check engine light I had it checked and said that it was the sensor it hesitates whenever you take off from like a stop sign and it hesitates going down the highway

I have a 2012 2500 and it says my overdrive sensor switch. Does that sound right?

great vid

What size socket is that?

Hello Ronnie my name is Adolfo I have a 2000 Dodge Durango tell me the speed sensors bad I don't know it has a couple of lights on check engine and then the speedometer work sometimes and sometimes it doesn't do you have any ideas

Great video, what was the error code you had ?

I have a dodge 2006 sprinter van that's kicking out a P0717 code. Apparently this is a transmission input speed sensor failure code. I can not find this part. Even Dodge can not help me. Do you perhaps know the part number? Are the input and output sensors the same? Thank you in advance.

I reset my speedometer and now by 2002 dodge van will not start and all the dash lights flash ? What should I do to fix this?

What kind of Dodge is this . Appears to be a 4x4 truck by the driveshaft next to the transmission. Im trying to research where the speedo sensor is on a 2009 charger. Appears to need all four wheel sensors and ABS module. But at the moment not concerned about the ABS Only need the speedo to work and hoping that will allow the transmission to shift from 1-2. . Would this be the transmission output sensor?

Gotta question on the exact location of the apes sensor on the trans

I don’t see this on my 05 but they sell this part for 05 am I just not seeing it any answers please help I got the part but do not see it on my transmission

You're the best

Anyone know where it's located on a 2004 ram 1500? Going crazy because I can't find it and not sure if I'm just blind or looking in the wrong spot

I think my input speed sensor is bad like i can hear it rattle when i shake it. Car won't go out of 2nd gear sometimes.

What size socket did you use

Thank you

And mine was a plug that wasn’t in .. check if it snap in before

Thanks mate!

Was this replaced on on a Jeep Cherokee XJ?

Where is that? I can’t tell where it is on the vehicle.

When the OSSS has been changed,what does it mean if there is still sporadic speedometer fluctuations,like going from 0 to 120 mph?

Thank You for the video..very helpful..I need advice on a 2003 dodge caravan SE 3.3 engine..v6 cylinders..about 2 days ago I had the Transmission Control Module replace..due to the my car scanner kept giving me the code for a TCM..I've had the part for awhile .. I couldn't afford to replace it..anyways I finally got it replace..I figured the engine check light would go off ..NO!!! It didn't.. As I was leaving the mechanic's I noticed the engine check light on again..they asked if had an issue.. I said yes..the light didn't go off.. They put the scanner back on.. Got code p0725.. The mechanic told me it was.. Crankshaft sensor.. I went to purchase it..went back yesterday they out it on..here I am thinking..everything should be ok..NO!!! Check engine light back on 5mins after taking it for a test drive..🙄.. I wasn't charged for the work that was done..they want to return back Mon or Tuesday so they can put it on a big computer scanner..to see what is the problem ..before I throw anymore money away..could the issue be the input/output sensors..since the TCM has been changed & crankshaft too & light is still on.. Its also keeping me from smogging my van...also when they changed TCM..they were going to charged me for oil..since the TCM leaks oil out...the main mechanic told me that..could he been talking about the sensors leaking oil & not the TCM..🙄

What year is this dakota?

So, what are the symptoms showing that was the issue?

Good info. Hey I have a problem. I just bought a 2010 dodge journey rt . and the transmission speed sensor light is on?

I got question wold that speed sensor be bad make trans not shit In drive?

Good afternoon, what are the symptoms of failure of this sensor? what changes in the car?

My VSS speed sensor is showing code P0500 on my '01 Ram 1500. Is this the same thing for a 5 speed?

What size socket did you use for the output sensor?

So where is it at under the vehicle? You video started with you already under the car

What size socket?

I need advice i replace rear speed sensor and my front breaks still lock i feel it front end of veicle divesdown

What was the truck doing that you knew it was bad besides the engine light being on?

could you please tell me location--is this under car? Can an older woman do this?

Is this for the speedometer cause mines not working?

This is the correct bellows vector

They gave me two cold for transmission for Chrysler Pacifica 2004 they told me it was a sensor for transmission sensor goes inside the transmission and the cold are P0700 and P0740

Where did he go under the b vehicle at?

What is the part number on this

I noticed you waited until the vehicle stop chiming to crank the car. Is that how we're supposed to be cranking cars? I just stick my key in and go. Just had to replace a fuel pump too so when I seen you pause before you crank I'm thinking maybe that's what I need to start doing

Having trouble finding output speed sensor on 2010 Jeep Grand Cherokee Laredo 2wd 3.7l A/T

Hi I was wondering if you could tell me what size of socket and is it regular or metric that you used for the video thank you and I'm going to subscribe

Would it be a problem if I didn’t disconnect the battery before changing?

could this be a fix for code p0732 gear ratio error in second? or p0792 computer speed ratio error? on a 2010 town and country

With this sensor being bad would that keep the vehicle from shifting into overdrive?

Where is it at on the rear

Would there be any reason why my speedo quit working after put the new one in?i

Doing one today! Stuck in first gear ATM 😂

Hi there. I'm not sure if you are still active on this channel?

Will this work on a manual trans?

How come I had a lot of trans fluid pour out of mine when I took my old sensor out?

I need to remove the oil to change it?? Because i would like to change my sensor and I don't want to make a mess in my rent home...

My speed sensor is out too and it feels like it’s jerking could that be the reason

Got a 99 Dodge with a Cummins in it 2nd gen speedometer works when it wants to I replace the sensor in the transmission and it still no better I do not have a check engine light but it'll work when it wants to can you give me any suggestions

Would this help with error code p1740 on a 2001 Dodge Ram 1500 5.9 4x4

Is that an auto transmission

Can this cause a problem with ur van over heating

Well I hate to tell you brother but I just changed both sensors in my Dakota and its the opposite. The output sensor will not seat all the way, bout the length of that little nose in front. But it will seat in the back.

Will this work with a 2000 Dodge Stratus SE ????

hi Ronnie , well done video , I have an 03 , 3.9 4x4 dakota , I might have other questions for you if I can contact you somehow

Not very clear as to where the sensor is but I'm sure I'll find it. My truck is throwing this exact code

Ok so what is the sensor on the rear end for?

what size socket

What DTC'S

Is the socket a 25mm or 1 inch??

U dont show how to get to the part. How do i get to it?

I don't have that on a 2003 dodge dakota 4.7 I have that black one on there

I have - 98 Dodge Ram 1500 my speedometer needle stays at 0 will this help??

I have a p0501 vehicle speed sensor performance.

I got to do it twice as the first one I got from Auto Zone was bad and totally failed in one day, I replaced it Friday night but Saturday morning it wasn't working completely right and by the time I drove 40 miles my wait to start light came on telling me I was in limp mode, Then Sunday morning if would do over 20 mph till I restarted it then it shifted so I was going to go get one after I got home from Church and couldn't get it over 20 mph so got a ride to get another one, everything is made in china, at least the second one is doing better so far, so you might have to get two before you fix it

It would have been nice if you went for a short test run before and after nice video though

But where exactly is the location pls anyone?????,

Donde lo lleva una troca dakota 94

I'm about to junk my 2012 dodge charger because don't even god can fix a rear left sensor and the crappy car is in safe mode since that. Replace Sensor, Axle, ABS module, Entire ABS module, and no way. I have normal read from 4 sensors like is ok but remain saying that have issues in rear left sensor and limp mode. IDK what else to do.

I did mine after getting a p0720

Where the input sensor transmission location....

I’m getting that code and my dodge magnum will not go over 35mph will this be the cause?

Cool thanks because mine speedometer will go funny what shift you all the gear s and drop to lower gear and somethimes will be ok. I will change that out because. The last owner change the one on. The rear end. And my abs brake light is on so that would explain it because it's all the same system

what would it mean when i pull this sensor out and all of my fluid drains out. can’t find any answers anywhere. please help!