How to: Change FRONT disc brakes, rotors & pads (Mondeo Mk3, Jaguar X-Type)

Подписаться 39 тыс.

Просмотров 8 тыс.

50% 1

Replacing the front brake pads and rotors (discs) on my Ford Mondeo (Mk3) (the same for the Jaguar X-Type), a complete guide.
Related videos:
Rear rotors & pads: • How to: Change REAR di...
Brake pad & rotor wear: • How to tell worn brake...
Bleeding brakes: • Simple how-to: Change ...
Replacing & adjusting handbrake: • How to: Replace and ad...
Replacing handbrake cables: • How to: Replace handbr...
Replacing rear caliper: • How to: Replace rear b...
You will need:
* Brake disc rotors and pads...
Amazon US X-Type rotors: amzn.to/38RZb57 | Pads: amzn.to/38ZrQFe
Amazon UK Mondeo front discs: amzn.to/2s94cWa | Pads: amzn.to/2Sd82IK
* Jack, axle stands, wheel nut socket & wrench
* 11 mm flare nut spanner for the bleed valve. Amazon US: amzn.to/2rkSzum | UK: amzn.to/2mNEKPo
* Crescent spanner
* For retaining bolts: 13 & 15 mm hex sockets and breaker bar...
* ... and torque wrench, shown used is Tekton 24335 1/2". Amazon US: amzn.to/2g1zGoJ | UK: amzn.to/2gJ7sAg
* Medium strength threadlocker. Amazon US: amzn.to/2DN3Upv | UK: amzn.to/2mTuVAv
* A lever arm like a flat blade screwdriver to retract pistons, or...
* ... other winding adapter tool to suit. Amazon US: amzn.to/38FNNcc | UK: amzn.to/2PJULo3
* Brake fluid, Super Dot 4. Amazon US: amzn.to/2BbX6Pb | UK: amzn.to/2DRlatX
* Self-bleed kit (if no assistant). Amazon US: amzn.to/2rk35Sm | UK: amzn.to/2EUAULK
* Silicone grease. Amazon US: amzn.to/2dv7lY2 | UK: amzn.to/2erht5w
* Anti-seize copper or nickel based. Amazon US: amzn.to/2rlBU9Z | UK: amzn.to/2Beksni
* Brake clean. Amazon US: amzn.to/2DNbGj6 | UK: amzn.to/2Bfp4d4
* Hammer
* Rags.
Torque values:
Slider pin bolts: 30 NM
Carrier bolts: 130 NM
Wheel lug nuts: 90 NM
Using the above Amazon links helps support my channel and is appreciated!

Авто/Мото

Опубликовано:

19 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@CraigsDIY 4 года назад

Amazon links to relevant products (from the desc): * US X-Type rotors: amzn.to/38RZb57 | Pads: amzn.to/38ZrQFe * UK Mondeo discs: amzn.to/2s94cWa | Pads: amzn.to/2Sd82IK * Flare nut spanner - US: amzn.to/2rkSzum | UK: amzn.to/2mNEKPo * Torque wrench 1/2" - US: amzn.to/2g1zGoJ | UK: amzn.to/2gJ7sAg * Threadlocker - US: amzn.to/2DN3Upv | UK: amzn.to/2mTuVAv * Caliper winding tool - US: amzn.to/38FNNcc | UK: amzn.to/2PJULo3 * Brake fluid - US: amzn.to/2BbX6Pb | UK: amzn.to/2DRlatX * Self-bleed kit - US: amzn.to/2rk35Sm | UK: amzn.to/2EUAULK * Silicone grease - US: amzn.to/2dv7lY2 | UK: amzn.to/2erht5w * Anti-seize - US: amzn.to/2rlBU9Z | UK: amzn.to/2Beksni * Brake clean - US: amzn.to/2DNbGj6 | UK: amzn.to/2Bfp4d4

@Nite-owl 3 года назад

Hands down the best instructional video I've watched on this procedure !

@hrmfa 4 года назад

Very good, clear and understandable video. The only thing I would do different, is to clean the wheel hub and spray a thin layer of some antiseze on it to make sure the rotor can come off when needed. Good video👍

@mortas72 4 года назад

Cool video from the exchange! What I would do was to clean the hub surface from rust under the brake disc, it is always better centered and adheres better. But ok, this is a good tutorial again, best regards!

@dansanya9961 4 года назад

Beauty! 👍 I would have a brake callipers to paint and it would be as new as a new one.

@bricomaher 3 года назад

Thanks 🌹

@user-mf2qc1ze8e 4 года назад

Thank you very much for watching your video. How do I change the mk3 gear holder and the od file head? Can't connect!

@FCT5791 Год назад

Hi, thank you very much for the video. It is very useful and well presented. Please tell me if you have any material for the injector line Ford Mondeo MK3 1.8 benzine. I suspect a partial block of fuel rail ore one injector is not working in parameters. All the best!

@fredriksafstrom1615 Год назад

Hello. Thanks for a great video. should the slider pin with rubber boot be at the top or bottom of the holder for the calipper?

@Rafixx5 Год назад

guide eraser on top or bottom?

@xmarcinmx 4 года назад

Question on another topic. Fuel pump. I didn't find information anywhere. What should be the fuel pressure in such an engine. Because he gives me 4.2 Bar (60.92 psi, 420 kPa). Duratec 2.0. It may be a response to business contact.

@ufopuum1 4 года назад

So basically what im understanding is that either you open the brake fluid reservoir and take some fluid out and leave the cap open when pushing the piston back or open the bleed valve?

@CraigsDIY 4 года назад

Do both to be safe.

@CraigsDIY 4 года назад

Rear brakes on the same car: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XC8UbaIdiGQ.html

@coopers4491 4 года назад

Happy xmas craig🎅🎅🎅🎅🎅🎅🎅❄❄❄❄❄❄❄❄❄🎁🎁🎁🎁🎁🎁🎁🎁🎁

@janrod3974 4 года назад

Craig, what happened to your hair?

@CraigsDIY 4 года назад

No comment

@marksmith0209 4 года назад

The disc brake spreader tool costs about ten quid, don’t make a job unnecessarily hard

@Nite-owl 3 года назад

Changed hundreds of sets of brake pads over the last 36 years of driving and today is the first time I've ever even heard of a tool specifically for doing something that I've been doing without all these years.