How to change Front Suspension Arm on AUDI Q7 4L TUTORIAL | AUTODOC

autodoc.co.uk

Подписаться 390 тыс.

Просмотров 47 тыс.

50% 1

How to change Front Suspension Arm / Front Wishbone / Front Control Arm on Audi Q7 TUTORIAL | AUTODOC
Top brands that produce Suspension Arm: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/ZnbNhC
Suspension Arm: goo.gl/HbyQdT
Suspension Arm for Audi: goo.gl/tbHx4L
Suspension Arm for Audi Q7 4L: goo.gl/jLFJI3
Audi Car parts: goo.gl/lPX3gz
Mobile Shop: m.autodoc.co.uk
► How to replace Air Filter on AUDI Q7 4L - • How to change air filt...
► How to replace rear toe link on AUDI Q7 4L - • How to change rear toe...
► How to replace Front Anti Roll Bar Link on AUDI Q7 4L - • How to change Front An...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Авто/Мото

Опубликовано:

14 июн 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@MariusFourie 7 лет назад

nice to see that the technician loads the suspension before final tightening. Many bushes fail because they are tightened while the arms are drooping causing excess movement when working.

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was useful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@kaibintech 2 года назад

Nice video! subscriped.

@mikefrankthedrummer 7 лет назад

When preloading the bushings (jacking up), place a rubber, plastic, or other soft material, between the jack and the ball joint bolt, or damage to ball joint bolt threads may occur. Or use another place on the control arm.

@autodocuk 7 лет назад

When removing or mounting the running gear, it is important not to damage the threads on the bolt fastening. Make sure all the excess does not prevent the assembly. Use protective caps or cloth in the high risk areas of defect bolting. Best regards, Autodoc.

@lolinternetslolify 7 лет назад

Excellent video. Thanks a lot. My Cayenne (nearly identical suspension afaik) needs a lower control arm replacement on both sides. This shed a lot of light into it. Would you recommend doing tie rods or sway bar links, possibly even upper control arms at the same time or is that just overkill if they don't show any sign of wear or fatigue?

@autodocuk 7 лет назад

Thank you for your feedback! Please, provide the chassis number of your vehicle and we will try to help you. The signs of wear on such cars as Cayenne can be not noticed till the irregular wear. We recommend you to contact the service centre for the full diagnostic of your vehicle. Best Regards, Autodoc.

@mpandedavid2699 6 лет назад

Hai what size of spanner did you use to remove ball joint?

@Playingbyear 5 лет назад

Great video. Looks pretty easy that! Are these suspension arms available on your shop? What is the delivery time to the UK? Thanks

@autodocuk 5 лет назад

Thank you for your feedback1 We are grateful for your comment and are glad that you like our video. Yes, we have such arms. The delivery to UK takes 4-6 days. Please, contact our Support Team, and our managers will help you. Best regards, Autodoc.

@howardjordan8838 3 месяца назад

What are the part numbers for the adjustable bolts and lock nuts

@autodocuk 3 месяца назад

To answer your question, we need more data about your car. Contact our Customer Care team and we will definitely try to answer your question. Our Customer Care team is always ready to help you to find compatible car parts fot your car and you can get in touch with us via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact AUTODOC

@colinaglae2605 6 лет назад

Many thanx for your brilliant video. The overview of replacing the Front Suspension Arm will be extremely helpful !!

@autodocuk 6 лет назад

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@alpinewhite 6 лет назад

I noticed that a lot of shops replace entire control arms instead of just the bushing. What is the advantage? Or is it just because of time?

@autodocuk 6 лет назад

Thank you for the feedback! Unfortunately, not all the manufacturers produce separate bushings, but only sell control arms in assembly, besides, many car owners do not press correctly the bushings and shorten their service life. Many automakers recommend to change the control arms in assembly, in order to get better performance of the suspension .Best regards, Autodoc.

@gtmaboyi 3 года назад

Thanks for the video, do you have these control arms in stock and do you ship to the UAE.

@autodocuk 3 года назад

Thank you for your comment! We highly recommend that you contact our Customer Support agents and you will get advice on which car parts you need to obtain. Please find all information about the delivery by the link: www.autodoc.co.uk/services/shipping We look forward to hearing from you! AUTODOC

@cirilo1521 4 года назад

How come you guys didn’t replace the bolts? The bolts must be replace every time are removed and torque plus degrees on some Them right?

@autodocuk 4 года назад

Thank you for the valuable clarification. We will take this into account in the following videos. Best Regards, Autodoc team

@stiveicestive3135 4 года назад

Hoola ¿ donde esta el video como se cambia el Acoplamiento magnético, compresor del aire acondicionadoa audi a3 o otros del grupo vag?

@autodocuk 4 года назад

Buenos días. Gracias por su consulta. Actualmente no tenemos el video solicitado. Si y en cuanto lo rodemos, aparecerá en el canal. Atte, equipo de Autodoc.

@bpac23 6 лет назад

Is the main reason for replacement here the bushings wearing out? Seems unlikely that the actual aluminum arm would wear/bend. Any feedback would be great as I’m starting to get a little “clunk” on bumps in my 2008 Touareg.

@autodocuk 6 лет назад

Thank you for the feedback! it's one of the reasons for replacement. It is recommended to replace the arm as a complete unit. Best Regards, Autodoc

@Ortoped007 6 лет назад

Yes. The joint close to the wheel wears our causing noise. But I don’t know if the front wheels should be adjusted after replacing the suspension arms. The wholes in the chassi Åre oval in the video so it must be some kind of adjustment possible. Anyone know anything about this?

@alpinewhite 6 лет назад

I'm guessing that a front-end alignment would be needed after this job. Can anyone confirm? Thanks

@ivormectin9184 Год назад

@@alpinewhite Yes of course, dont have it in jack mode which the idiot at the tyre fitting centre did on mine ... foocked everything up and more new tyres 300 miles F,,N idiot

@loveweddingphotosandfilm6089 Год назад

@@alpinewhite according to the workshop manual, yes, you need to do a wheel alignment after replacing this control arm.

@haydenstribute 5 лет назад

Why would you do this without marking the eccentrics for alignment adjustment before removal of the bolts, so that the alignment would at least be very close to correct when reassembled!

@autodocuk 5 лет назад

Thank you for the feedback! If you need to replace a driveshaft from the side without a hanger bearing, you can just pull out the shaft after you take off the hub. Best wishes, Autodoc.

@haydenstribute 5 лет назад

@@autodocuk Not really the point of my comment, is it. Marking the position of eccentric adjusters should be routine

@odanne29 3 года назад

It looks so easy when you do it..but what does that part do? how do you know it must be changed?

@autodocuk 3 года назад

Before replacing, please contact the service of your car for a technical diagnosis of a part of your car. AUTODOC

@samvincent7415 2 года назад

Hi do you have a part number for these please

@autodocuk 2 года назад

Please could you contact our Customer Support team and we will be able to assist you. AUTODOC

@benjossie8834 5 лет назад

What are the torque specs on the bolts?

@autodocuk 5 лет назад

Thank you for your feedback! Our new videos will surely show this information for our viewers. Best regards, Autodoc.

@balibois 3 года назад

180Nm

@garyalcorn3831 2 года назад

How long you reckon a mechanic would take to do this?

@autodocuk 2 года назад

Unfortunately, it is not possible to answer your question for sure. AUTODOC

@alpinewhite 6 лет назад

7:36 Is there a reason you didn't use a ratchet on the left side? I see you used a box wrench.

@autodocuk 6 лет назад

Thank you for the feedback! These keys were used for more convenient access, unfortunately on many new models of cars it is not always convenient to get to the part and dismantle it. Although in general it was possible to use the ratchet wrench. Best regards, Autodoc.