How To Change Rear Brakes On a Ford Fiesta Mk6

Подписаться 1,9 тыс.

Просмотров 12 тыс.

50% 1

In this video, i show you how to change the rear brake shoes and drums on a 1.6 TDCI ZS Fiesta MK6
Disclaimer:- McLaren Media & McLaren_Automotive_Photography present the facts and content in these videos on a strictly fun and informative basis, these videos are not guaranteed to be 100% accurate.
McLaren_Media and all associated names assume no liability for property damage or injury incurred due to any information in this video. Use this information at your own personal risk.
McLaren_Media always recommends safe working conditions and the correct tools and safety equipment before undertaking any type of vehicle repair or photography shoot of any nature.
No information shown in any video will result in any expressed or implied warranty or guarantee of any personal results.
Injury, damages, loss or health implications that may result from improper use of tools, parts and unsafe hazardous working areas or locations and from the information in this video is the sole responsibility of the user and not McLaren_Media.
Titles and Idents available at:-
www.productioncrate.com/#ref=...
Redbubble Shop:-
www.redbubble.com/people/McLa...
PICFAIR Shop:-
mclaren-media.picfair.com

Авто/Мото

Опубликовано:

15 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@186scott 4 часа назад

Here is a tip once you put the handbrake cable on the brake shoe then put the top spring on then the adjuster then the bottom spring they should hold themselves together enough so put it onto the backplate placing the side with the wheel cylinger starting eoth the handbrake side put that on fullyso the top and bottom is in place and put ita retaining clip on then all you need to do is use a screwdriver (anything that you can use to pry) pry the bottom of the other side into place and then out the retaining clip on (it is possible to do on your own)

@hexy3084 6 месяцев назад

The reason drum brakes are used is because they last for a very long time before needing replacement compared to disks due to the contact surface size and it's all contained from potential contamination (people cleaning brakes or using products they shouldn't) and low maintenance as they last longer and cheaper for manufacturers. That's at least what I've found about them. Also generate less heat although they don't dissipate the heat as good (would get fade if heavy braking was used very often). Great video I had no idea how to actually replace them mine are working fine but they're rusty as hell so I think I will buy a set and a new cover too :)

@stappsi2444 11 месяцев назад

Nice video, thanks vor explaining everything so good👍🏼👍🏼👍🏼

@kieranpower5916 9 месяцев назад

good help me out big time ,thanks,

@IindeysWish Месяц назад

Doesn't show what was used in order to replace the top spring, makes it very complicated to replace the top spring not knowing exactly what tool was used to do it.

@kalvindolphin6577 Месяц назад

Hi mate where did you get these shoes from and do you have a part number keep getting sent the wrong onea

@mclaren_media9145 17 дней назад

Tbh they were just off ebay www.ebay.co.uk/itm/271137198712?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=awNQcFpuSBu&sssrc=4429486&ssuid=IZaIq_2cRPi&var=&widget_ver=artemis&media=COPY