How to check fuel injector values with VCDS (VAG-COM) for VW, Audi, Seat, Skoda

Подписаться 118 тыс.

Просмотров 286 тыс.

50% 1

How to check fuel injector values with VCDS (VAG COM) dyagnose for VW, Skoda, Audi, Seat in 4 steps. This video tutorial has been done on VW Golf Mk5, 2.0 TDI engine, 2004.
HERE you can find VCDS (VAG COM) OBD2 Diagnostic Cable for VW, Audi, Skoda and Seat: amzn.to/3eGtXQm
Find More Cool Products for VW Golf 5, Mk5, Jetta HERE:
- 6 Speed Gear Shift Knob Gaiter PVC Leather for VW Golf Mk5: amzn.to/3GtNvqh
- Flip Key Fob with Key Blade for VW Golf Mk5: amzn.to/3wUtE0j
- Rear Air Outlet Vent Assembly Fit for VW Jetta MK5 Golf GTI 5: amzn.to/2xzEDRa
- GPS Navigation Head Unit 9" Touch Screen for VW Skoda Octavia Golf Touran Passat B6 Jetta Polo Tiguan Support Bluetooth WiFi+ Rear View Camera VW GOLF MK5: amzn.to/3N0L01a
- Rear view back up camera Logo Emblem for VW Golf Mk5: amzn.to/34OVGuw
- VW Led License Plate Light Bulb For VW Golf 5: amzn.to/2zfYx40
- Dynamic Turn Signal Light Side Marker Lamp for VW GOLF 5 GTI V MK5 Jetta Passat B5.5 B6: amzn.to/3z4HIpm
All about MONEY that makes MONEY. Change the game! 8 steps to know everything you need to know to get there! ---- bit.ly/3sYgQDM
If you enjoyed this video tutorial, make sure to give it a thumbs up and share it with your friends. Also, don't forget to LIKE and SUBSCRIBE!
More VIDEO TUTORIALS on www.servicetutorials.com
Follow us on INSTAGRAM: service_tut...
SUBSCRIBE our RU-vid channel: / @servicetutorials
This video is only for informative purposes! We do not take any responsibility and we are not liable for any damage as a result of the information contained in this video. Use this information at your own risk. Thank you!
If you have any suggestions about new tutorials, let us know in the comments section!

Авто/Мото

Опубликовано:

13 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@tudorstef5941 3 года назад

Nice and eays. But how can i test the injectors flow on a 2.0 tfsi with vcds 21.3 ?

@CarDiagnosticBG 3 года назад

This type of injectors can be tested only on test bench after removal from engine.

@andychapman5217 3 года назад

Ive a vr6 3.2 having a slow start when engine is hot would a leaky injector cause this ive a vcds im goning to check them today...thoughts?

@andrzejrospulak9099 2 года назад

Ive got a problem with fuel dose, my car uses so many petrol, any advices how to change that in vcds?

@ermiasfikadu9906 7 месяцев назад

Hello sir, i want to ask you my Volkswagen polo 1.4 16v having problems with high fuel consumption and engine shaking when speeding i check everything is good but later i notice my 3 and 4 spare is lean condition 1 and 2 spark is good. Would you please give some advice thanks

@pavolkubica6559 4 года назад

Vo verzii 19.6.2 na kanáli 12 a 13 mi neukazuje žiadne hodnoty (prázdne políčka), mám niečo zle nastavené? 1.4 TSI

@andychapman5217 3 года назад

Hi is this the same for the cylinder vr6 ?

@mickmolloy6594 2 года назад

Advanced measuring values doesn't show for each cylinder, just gives and overall figure, or am I missing something?

@MrBirol006 Год назад

Hi my friend.😊 Lower mg/str means that the injector is outting less fuel to the cylinder? Is this true??😢😢😢

@abdulbeany1894 Год назад

Hi my injection quantity is bouncing around 1.5 and 2.2 mg and it supposed to be around 3.0 to 9.0 mg what can be the problem all 4 injectors are good and reading within range

@abdulbeany1894 Год назад

Hi my injection quantity is around 2.2 and it says it supposed to be around 3 to 9 what could be problem all 4 injectors are in range reading good thanks

@viridian6903 2 года назад

How can be checked blocked one with basic setting activation and disactivation?

@marcossalinaslara2021 2 года назад

Hi everyone! It doesn't Work on a Gti mk5 2007. Any idea of how to do this on a gti mk5?

@andrewwright. 5 лет назад

Nice

@colin5064 3 месяца назад

So how can you alter these values if you need to ,if one or more cylinder is out of range?

@06Radioactive 7 месяцев назад

thanks

@Servicetutorials 7 месяцев назад

Thank you too for watching!

@DiasDude 3 месяца назад

i have to test it with engine on?

@colin5064 4 года назад

What car is this correct values for also is this idle speed ? at what RPM.Good to know but short on infomation

@willybaldsirhenry 4 года назад

These are not injection quantity values, these numbers show the different amount of extra fuel the ecu is injecting in each cylinder to stabilize the engine. If the values are positive, it signals that the injector may be damaged or the electric signal is weak. If the values are negative, the cylinder is lacking fuel. Either injector is carbonized, or the fuel pump may be faulty. However you need to drive and log the values under engine load. Just to make clear. Great vid tho.

@berczigabor 4 года назад

No, these are idle stabilization values. They're only meaningful when the engine is idling, not when you're driving. Also, differences in them can have a lot more reasons than just problems with fuel supply or the injectors themselves. For ex. worn camshaft lobes or lifters (on PD engines), but carbonization of the intake ports and valves can just as much affect these.

@willybaldsirhenry 4 года назад

Gábor Bérczi hey Bro if your camshaft is worn out you will more probably receive an temporary MIL because the boost pressure is lower than expected when Engine is under heavy load. Additionally you will hear mechanical noises if a lifter is failing. But you are correct some measure values are only applying to engine idle mode. Logging a combination of common measure values under different load states still is your best and First option ;)

@berczigabor 4 года назад

@@willybaldsirhenry Cams have nothing to do with boost pressure. At all.

@willybaldsirhenry 4 года назад

Gábor Bérczi Again you are wrong ;) when your cam shaft is worn out the valves may Not Open enough or may Open too late which will result in an poorer exhaust mass hence your boost pressure may be lower than expected.

@willybaldsirhenry 4 года назад

This will also result in backfire to the intake manifold. Have a nice day and im out.

@petruadrianpatrascu6239 2 года назад

Salut. Pentru polo 1.2 9n cum Dumnezeu se verifica? Nu e prin aceiași metoda? Mi-a dat tema de gandire cineva spune ca nu-i arata nici o valoare. 🙄

@cristianalin5081 3 года назад

Hi I also have a problem I have a vw bora 1.6 16v 2003 BCB and I put vcds 12.12 or 20.4. And I give group 13 and I don't see anything in the boxes 3 empty there dc it doesn't appear to me or where can I give them to see the injectors I don't know where to find them to see if I have problems at the time that it is idling to die

@trevorhutchinsth 7 месяцев назад

hi do you iknow how to change the idle fuel settings ? i need a little more fuel at startup

@marcioramos2632 Месяц назад

clogged injector or bad fuel pump

@likezdislike 24 дня назад

Do you have videos for dpf and boost values?

@Servicetutorials 18 дней назад

not yet, sorry!

@bojanbox8691 4 года назад

The CAN protocol is unavailable to me, I only have UDS, so the "Meas_Block" option is also unavailable. I do not understand. I have a VAG of 18.9 and the car is a Passat b7 (2011 year)

@rokmarkovinovic8653 4 года назад

Box Box newer vehicles use UDS protocol and the classis measuring blocks is unavailable. However, you can go to advanced measuring values, which is same thing basically.

@bojanbox8691 4 года назад

@@rokmarkovinovic8653 Yes, you are right, but it was easier for me as an amateur to see the state of the injector through the measuring blocks. Now I'm not sure how to interpret the condition of the injector ....

@bojanbox8691 4 года назад

Da, u pravu si, ali meni kao amateru je bilo lakše da preko mjernih blokova vidim stanje injectora. Sad nisam siguran kako da tumačim i gdje da gledam stanje injectora...

@ante2894 4 года назад

Na toj verziji vcds moras na taj nacin. Kod mene u Pola je ista stvar. Ugl kad udes izbaci ti onaj malo prozor, u njemu potrazi izraze "injectio" stavis kvacicu na svaki injektor i dobijes trenutne vrjednosti u glavnom prozoru.

@michalr2684 4 года назад

I don’t have measuring block with my vcds what do I do now

@bojanjokanovic2704 4 года назад

hi, where i can find free version vcds download? please for link. txn

@TheHDPerspective 4 года назад

the program is free to download, you have to buy the adapter

@cosminh.6036 2 года назад

Se verifica la rece sau la cald injectoarelor?

@cristiantanase4558 2 года назад

Cald

4 года назад

How do I make it strong

@VIJAY8016616623 3 года назад

Can i use Bluetooth obd to connect with vcds for vw

@krunoslavnegulic9939 3 года назад

@syedshahbazali1417 Год назад

I replaced my Skoda Yeti 4th fuel injector and while coding, when press the do it button, a dialogue box appears saying: This appears to be an uninitialised control module; Valid WSC/importer/equipment data may be required. Click Yes for vcds to use default values of 12345/123/12345 Click No for vcds to use values currently in the module , Click cancel to go back and manually edit the I tried both the yes and no options nothing works, engine won't start (was working perfectly before it was just a bad 4th injector but was working). I primed fuel as well. The car engine is not starting at all now seems like the coding is messed up. Any help would be appreciated. (VCDS is genuine - software, and cable both)

@helleyequeue Год назад

Mate the injector have a number on the top something like AS234SD you need to type it instead of the default 12345 that is put by default. Check how you can see the injector in VCDS and put the part number instead 12345 it's 2 min job. My car was starting when I changed the injector but it had a dash light till I coded it

4 года назад

can you improve performance

@Servicetutorials 4 года назад

murat seyithaliloglu No, you can not.

4 года назад

you know

@lifeindetale 3 года назад

Hey

@tomas7472 3 года назад

does not show fuel injector,what the hell

@Mattmazz77 4 года назад

I can't open measuring blocks

@golfgtd777 3 года назад

me too

@bogdanawokenn 3 года назад

did u solved this problem? i have the same problem

@Mattmazz77 3 года назад

@@bogdanawokenn yeah some year cars and or models don't have that option for certain computers or modules. Like I can't used the measuring blocks for the ecu but there's another way by going into advanced measuring values

@basilet8397 3 года назад

@@bogdanawokenn Point to Advanced Measurements and select from the long list that will appear!

@stefan_jank 4 года назад

I get on one cylinder -1,50 is that okey?

@VojislavNikolic 3 года назад

Koji auto vozis? Ja kod Skode imam od -2 do 2, nakon toga je za zamenu.

@stefan_jank 3 года назад

@@VojislavNikolic Audi A7 3.0tdi 245ks

@VojislavNikolic 3 года назад

@@stefan_jank Mašinčina. Godište? Ako imaš nekoga sa VCDS da ti isčita parametre bilo bi ti super. Ja imam VCDS pa sam i neka kodiranja radio na Škodi.

@stefan_jank 3 года назад

@@VojislavNikolic Imam Vds, svi su na 0 osim ovaj jedan na petom cilindru je -1,50

@VojislavNikolic 3 года назад

@@stefan_jank Moravcevic servis, mozda su gumice. Ako ne dimi i ne trokira, samo vozi. To je neunistiv motor.

@shaagealgareb9189 5 лет назад

hi...this car TDI or Benzen(petrol)...?

@MrSequ3nce 4 года назад

شاجي الغريب diesel

@olliedufeu 4 года назад

Meas blocks on my vcds wont let me press that option when I press it it does nothing

@bentley8787 3 года назад

you must have a different model. I have a 2006 A8 4.2 petrol and my fuel injector group is different too. look for a group that uses that same measurement value

@sarge5470 Год назад

I can’t access mess. Blocks… it is dimmed out and so is readiness and coding II !! When I click on them I get message - error function not available-2015 Passat 2.0TDI 6mt

@roostaraver Год назад

Same here 2010 vw golf , did you manage to get it to work

@sarge5470 Год назад

@@roostaraver no dude 🥺 Yesterday I installed new cam sensor new air flow sensor and my car is still not performing 😭 today I got a new ambient temp sensor because it is cooler day and I have my suspicions… but yeah idk gauge on cluster seem accurate so I’m just throwing on money on it for no good reason lol 😂 will refresh computer after I get that replaced 😳 I think computer may be locked with current software so after I unlock it everything will become visible… to do that you just flash computer with new complete file - get it from Alientech.. I can’t even remember what it was called but each computer has its own file to be flashed in unlocked and restored to default…. Best do it in bits from my experience or use genuine tool

@sarge5470 Год назад

@@roostaraver yeah you can use mpps too

@roostaraver Год назад

@@sarge5470 what is the fault with the car ? i have original software and i still cant click on the blocks in engine

@sarge5470 Год назад

@@roostaraver that’s why I’m replacing sensors in attempt of finding dummy one.. right now o purchased ambient temperature sensor …… I thought it was located only in air flow sensor but I guess there are more of them on car

@bilndadhar2463 10 месяцев назад

والله والله والله لقد ادميت قلبي بموقفك ورجولتك والتوام للقران.رحم الله اباك واسكنه فسيح جناته.اما اله وانا اليه راجعون .لله ما اعطا ولله مااخذ. اللهم الهم اهل المرحوم الصبر والسلوان.

@ivohainov 3 года назад

At what temperature is it correct to measure the values - when the engine is cold or when the engine is warm?

@dobatachilikov6380 3 года назад

warm, without any consumators like radio or lights.

@jonmyers74 4 года назад

Was your injector 1 faulty

@todortodorov9240 3 года назад

Anything between +-2.8 is okay (warm engine, no ac, radio etc)

@mirekwolny4041 4 месяца назад

Witaj Chris. Skoro już tak pracujesz na takim silniku. Mam zapytanie. Auto nie chce odpalać za bardzo na zimnym ale już na cieplym jeszcze gorzej. Krurki dystans pomiędzy odpaleniem nie ma problemu. Świeżo wymieniony Rozrusznik. Liczyłem ze coś to zmieni. Ale nie bardzo. Jakieś podpowiedzi? BAU Allroad 2.5tdi c5

4 года назад

Horsepower