How to Choose Air Bags & Brackets for your build 

“More cushion for the pushin”...Your videos kick butt man. Thanks for sharing!

‘More cushion for the pushin” 🤣 😂

Good vid and info. Thanks . Planning on making my '56 Buick lay frame

One thing I like about you and your utube videos you give part numbers when ask other questions on parts they say go back to the video thks again

Thanks for the video. One question, how do you pick stroke length? If I am trying to get near stock ride height would I just measure the original spring height? Or do I measure the suspension maxed out say on a lift with axles dropped? Looking to put air ride under my 78 F250 which has more of a high boy look. As far as weight capacity goes, does a higher capacity air bag ride worse/better? I dont plan to tow but may want to to pick up a car on a trailer. Thanks!

Great informative video, Question hope you can guide me in the right direction... Which bags would you suggest I get for a 1965 Impala Station wagon ? Thank you very much

Nice video ! I'll be watching you

Hey i have honda odyssey exl 2008 do you recomend some air bag and brakets for this van tank great videos

I have a 81 camaro and was going to put ACDelco 519-36 Specialty Front Spring Assisted Shock Absorber in the front, So my question is im looking to have the camaro have a switch for race mode option what is the best air ride do you thing i need in the back?

I’ve got a Mitsubishi diamanté 1993. It comes with factory air. Can I fit after market bags to make it lower? I have a set of Tein coilovers. Can I get bag to go over he coilovers to replace the springs? What do you recommend? Thanks.

Great video thanks. I need help with a small diameter bag and can't find anything. I'm doing a golf cart so they don't need to be super strong. Can you help in any way?

My 97 Dodge Ram is lowered 3 in the front and 4 in back. I’d like to bag it in the spring. It’s currently sitting on 22s. Will I need different rims if I get bags for it?

Mr Tinman, I've watched this video several times. One question I have, does the tall cup go on the top and work better with the bag lower to the lower control arm for a specific reason?

Best air bag video on the net for info Thx man Can you do a Bello bag video

Some of these airlift kits come with thick brackets. For example the ones for the 2018 accord in the rear. Could they be trimmed a little to lay a little harder?

Great video as always man any new projects on the way

I like your channel and subscribed today. I installed some slam 6s today but in full droop it looks like the bag is coming apart at the top. Is there anyway I can send you a picture of the bag and you tell me if it is normal?

Great video first of all. I'm bagging a 64 cadillac and am using dominator 2600 bags, 3 out of 4 of them leaked and after getting warranted replacements one of those leak also. So I am thinking about trying the slam 7. Was curious about ride quality between the 2 and is the stroke comparable. Dont want to sacrifice ride height. Thanks

Hello i have a 1995 Chevy Caprice i Am Looking To Bag The Front. I saw some ebay bags for 180-240$ for the pair do you recommend?

"more cushion for the pushin, like a fat chick" got you another sub ,LMAO ! im dead rn! LOL

what do you recommend for 62 c10 rear? pulling a vintage trailer 1800lbs

I gotta add air bags on our cargo trailer as we haul fruit to the farmers market and don't need bruising. Thanks for the info.

Getting ready to bag my 67 C10 which has a 85 front end under it. Was thinking Firestone 2500 in the front and Firestone 2600 in the back just for clearance. Or do you think the 2600's will be okay in the front?

Good vid bro. But my question is which bag is good for a 64 impala. And if you wanted to get the vehicle to stand tall on all 4’s ( where you can see the rear axle and all) what would be a good bag.

I have a two inch hole at the top where the bolt goes with nothing to bolt to. Is there a gusset or metal piece with a hole that I can use to make the upper cup hold tight to the shock tower?

Awesome.

Hey bud I had a question. I'm currently replacing my old 7" Slam bags and was considering switching to the Dominator bags. Problem is my truck is in storage a few hundred miles away, so I do not have the ability to get to it to measure first hand. The slams being "non-balooning", will the Dominators fit without rubbing in an application that was meant for the slam bags, or do they balloon out a lot???

I was just doing some air bag maintenance on my toyota pickup today, i got ss RE6 in the front(not a lot of room in the front of mini trucks for bags and the slams dont balloon) and airlift 2600 in the rear, its bag on axle so the ride isnt the best but i might add lift bars one day or just redo the setup, I mean i have ridden in both and yes bag on bar is noticeably better but its still better than leaf springs i think.

Sprung my truck when I rebuilt all the suspension. Like to bag it at some point... laying frame looks so good ! We get tons of rain though and seeing as this is my daily I wonder if it might be more headache that its worth. The loss of the inner fenders alone makes me shudder thinking of all that water flying wherever it likes.

Tin man. I know this video is 5years old but. What are your thoughts on Airmaxx bags and equipment for a first build?? Love the videos. And I love going back to the archives!

Question, what fittings do you use for the dominator i bought 1/2 npt and they only go in half way and stick out to high as a matter of fact they even stick out on my tank, are they supposed to go flush?

Nice!

Great informative video! I have bags on my 2007 Chrysler 300C 5.7L V8! The rear bags which are similar to those in your video seem to roll over on themselves quite noticeably! They do the job, meaning they go up & down but they just don't look right! What would be making these bags do this??? Any assistance is greatly appreciated!

SIR, I NEED YOUR ASSISTANCE.... LIKE YESTERDAY! 1998 chevy s10 Airmaxxx complete 3/8" Manifold Bag Air Suspension with 480 compressor, AirSlamIt 2 link suspension and panhard bar install... Need help with bag mount location, pitch (is leaned up or back but drive line is perfectly straight-not good), ride height (if necessary) is it possible to get away with it without C-Notching the frame or is it a must do? (Have the 8pc C Notch kit from AirSlamIt) If i have to notch then on the driver side what do i do about the black box that my fuel line runs into and the actual lines as well? So many questions, no experience whatsoever & solo on the project with like 2 or 3 days left to get it done... Truck is on lift, leafsprings removed, front lower control arms hanging and coils removed, 2 link bar bolt mounted to the front of the bed (closest to the cab) and u-bolted in between the original rear shock's bottom bracket and axle... Makes my pitch as described (if vertical line was the axle and dashed line was the drive line it would look like this |------... now my axle is like | but imagine the ujoint on the pumpkin facing 45° upwards like facing my back window and the driveline is perfectly straight as it should be \------

I have a 54 Chevy pickup on a 2000 S 10 Chevy chassis frame. Will those bags work if I wanted to slam it?

Im building a 86 c 10 bought the bag plate kit for the front does the cup weld in on the bottom or does it just sit in like a spring

Hi! What do you think, which one will have more comfortable, smoothest ride in equal conditions, ss6 or D2500?

Iam doing slam bags on my 62 impala and laying the frame on my 48 fleetline on a 4 link c notch

Suggestions on my 95 Buick Roadmaster saden

So my 63 impala is really bouncy in the front , he sent me firestone air bags and monroe shocks.. air lift bags rear. Should I get the ss7 bags for the front and maybe better shocks?

Thsnks for the video. Please I want to bag my Chev Corsa Wind front and rear tell me the reference of bags and hardware that I need. Thanks.

What do you recommend for 81 vette...

How would these be for air lift in a Escalade for towing for replacement of the rear springs

Where are you located trying to find someone to help with my bagged install I'm trying to do a 2006 Dodge Ram single cab I have a kit from bcfab and full rear Notch kit from ekstensive Metal Works

Ebay is just a buy website is not a part brand. Summit racing, lmc truck, jeggs and other big companies sells in ebay

I want to bag my 95 impala ss . What would you recommend? Is there a good kit?

The only thing I’m concerned about is your voice not matching your face 😂

Do you have any tipps for bagging a geo tracker

Do you Know The bags size of Mazda rx-8 (2006)?

How much can an air bag twist and bend?? Like i mean if its not straight up and down. Can it inflate and deflate even if the back is not straight

How wide are those smaller bags?

Where are you located?? I would love to have you do work on my truck.

Hi i hav car named maruti ignis which air bag size shd i go for plz suggest

Hello what do you need to buy to add airbags to your truck?

What is the downside to using a huge 10" + bag , where clearance is NOT an issue? On a light weight car...

Do these have internal bump stops?

I have a 67 cad and want to bag it..i already have a tank (endo cvt) need bags, fittings, lines, etc what would you recommend? Im looking for a comfortable ride

What kind of thread sealer do you recommend for the fittings on the airbags so they don’t leak air

Maybe this is weird, i'll let you decide, but I'm trying to find someone who has brackets that are taller than what is normally sold. I have a 64 Impala and all the bracket cups I see are about the same overall height, and I'm sure most people like to be able to slam their car on the ground. In my case, this is NOT what I want to do. When my bags are totally deflated and im riding on the bumpstop, I still want my car to be an inch off the ground at least. I know it looks cool to have your underbody and exhaust touching the ground, but beyond looking cool it serves me no purpose, and incase of an emergency in which my bags lose all pressure, I want to be able to still drive my car a short distance to safety. Does anyone know where I can get brackets like im talking about??

Where are you located at I have a lowered 86 square body

Is there any drawback to the sleeve style bags? I'm planning a rod build and I want full fenders so that doesn't leave a lot of width room for the double convoluted bags as far as I can tell

So i want to run air lift dominators on the front of my 65 chevy c10 which size do you recommend, they will be on the stock a arms the d2500 or d2600

Holy shit. Lol. I was expecting a 15 year old kid by the voice. Then you turn the cam and look 40 haha

What about ballooning I know the slam bags dont what about the air lifts

Nice masks !

Q: What gets easier to pick up the heavier it gets? A: Women "More cushin' for the pushin'!"

I need two air bags for my bus let's get in touch please

Hi guys donu recommend mentioned here bc fab @ on ebay thank you please respond with their feedback