How to Convert Epson Ecotank Et-8550 to DTF (Direct to Film) Printer

Подписаться 8 тыс.

Просмотров 163 тыс.

50% 1

This is the old method to convert.
Updated DTF conversion Video:
• Epson ET-8550 How to C...
ET-8550 CISS KIT
hangrymuscle.com/products/uni...
Here's how to convert your Epson Et-8550 to a DTF (direct to film) printer.
-Initial Installion
-Filling the Inks
-Removing Rollings
0:00 Intro
0:22 Unboxing
12:14 Turning on the printer
12:30 Printer Initialization
13:20 DTF Refillable ink bottles
19:00: Putting in DTF Ink
23:23: Printhead Nozzle Check
27:00 Removing Rollers
29:00 Test Print
Full Video for removing rollers:
• Removing Rollers on th...
SUPPLIES USED ARE FROM: dtgpro.com/?afl=3277
DTF Ink: dtgpro.com/cicproduct/dtf-pro...
DTF Film A3+ (13x19): dtgpro.com/cicproduct/dtg-pro...
DTF Powder: dtgpro.com/cicproduct/dtg-pro...
-------------------------------------------------------------------------- Website:
www.hangrymuscle.com
--------------------------------------------------------------------------
Follow me on Social Media:
/ hangrymuscle
instgram.com/ActionfigureZach
--------------------------------------------------------------------------
To donate to my coffee addiction ☕️:
CashApp $zachwill949
Venmo: HangryMuscle
Email: contact@hangrymuscle.com
FULL DISCLAIMER: I make a small commission on my affiliate links
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550
Coupon: Hangry for an extra %5 off

Хобби

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 322

@litlsuz 2 года назад

I watched this shortly after you first posted it. After doing a lot of reseach, I'm back. I'm subscribing. Love your style, you are so calm. I came for the knowledge/experience you offer on the DTF. Much appreciated!

@HangryMuscle 2 года назад

Welcome back, glad to have you. Appreciate you watching, Thank you 🤗

@codysmith4665 2 года назад

Top 10 most under appreciated videos. My guy great video. You are to my knowledge the 1st to film this and I've been looking everywhere for this content. Keep it up man.

@HangryMuscle 2 года назад

I had the same idea, no one else is openly using it but its a fantastic printer to use, with very little maintenance 😊

@imnared4784 2 года назад

So do u have to have a extra little box where the extra ink go to or is it something else you were saying that you have to put a drain in

@HangryMuscle 2 года назад

@@imnared4784 No I didn't install the external waste tank on this. This printer doesn't require excessive cleanings so the maintenance box is not being filled up like other printers.

@triciamackey6669 Год назад

I purchased this printer a little over three months ago and convertedit to sublimation. Now I'm seeing so many people converting them to dtf. I'm glad I came across your video. I might have to purchase another one for dtf. You've made the process look easy.

@iamnucleus Год назад

How reliable has it been for sublimation, has it clogged up 9n you and has it been hard to maintain, thanks

@keesha8469 Год назад

@@iamnucleus i have a ep 2760 sublimation I barely use never clog

@iamnucleus Год назад

@@keesha8469 thanks for replying. I found a good deal on an epson r3000 going to convertto dtf, do you have any with these.

@keesha8469 Год назад

@@iamnucleus i just bought a 8550 to convert to dtf but im still debating as it seems to be a lot of maintenance

@keesha8469 Год назад

@@iamnucleus i wont buy another small print like my sublimation printer. Im going to buy another large format 24in and convert to sublimation to printer larger as well

@JoseSalazar-lh3xl 11 месяцев назад

Yo bro thank you so much for everything Even the simple plug in the ink for sum reason everyone be hiding these things and you just talk about it without any hiding . Much love bro god bless you please keep up the work and the videos . I neeeeeed more . I love the way you are as a person to i can’t stress this enough sir. . GOD BLESS TOU

@FourCornersCustomProducts-4CCP 2 года назад

Awesome tutorial and great content

@HangryMuscle 2 года назад

Appreciate it , thank you! 😊

@FourCornersCustomProducts-4CCP 2 года назад

@@HangryMuscle Anytime 😊 Support Support Support Support 💙

@HangryMuscle 2 года назад

@@FourCornersCustomProducts-4CCP 🙏🙏🙏

@AdamAdam-gd2tv 2 года назад

Thank you was amazing video

@HangryMuscle 2 года назад

Appreciate that, thank you for watching #stayhangry 💪🏾

@SweetArtsCustomCreations 2 года назад

Great info thanks for this video. I'm looking into dtf to upgrade my personalized items business.😀

@HangryMuscle 2 года назад

DTF is perfect for that.

@HangryMuscle 2 года назад

No problem, appreciate you watching thank you 🙏

@ibrahimosman7835 Год назад

You have absolutely NFi . Good luck 👍

@HangryMuscle Год назад

Why would I need luck, Been printing with it over a year now.

@user-fn5iy1eh8d 11 месяцев назад

Happy this bloke is not playing with my printer🍉.

@naturalhealthrevolution1518 2 года назад

DTF...How fast can it print a 13x19 full color design?

@dakotawills5907 Год назад

So, i know white ink likes to crystalize after a couple days. Do you just run through it quickly or do you remove and shake it?

@LucyLu70 Год назад

Thanks for the video Why did you have to remove the rollers?

@JORGINHODONASCIMENTO 2 года назад

Great video! I have one myself that i converted into dy sublimation and the quality is amazing. My question is, how does the printer know that the second black is not black but white and how does it know that grey isn't grey but white? What settings do you use? How do you achieve that. Why do you have to remove the rollers? i am not sure i heard that explanation.

@HangryMuscle 2 года назад

You need a DTF rip program the color settings. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-58uiuYDz86A.html

@da-tutor2916 2 года назад

Roller is removed because it can cause jams or smears for this ink. The color assignment comes from a rip software that lets the printer know what is what.

@allthatglittersisglorias3414 2 года назад

Wouldn't anything with grey turn it white instead or would it mix the black & white together to get a grey effect? Can you use get ink instead of white? Also, how would you switch the colors in the image to achieve the right effects?

@HangryMuscle 2 года назад

Hi, I'm not sure I understand your question. The printer uses CMYK to make the colors and the white ink is to print white layer behind the image so that when it goes on to a dark material the colors stay vibrant. The white layer also gives the print its durability. You can use an ICC profile, or photo editing software.

@shelbytate6298 Год назад

Which rip software is better? CADLINK or And the CADLINK or Acrorip for the Epson 8550. Also, cadlink software says desktop version next to it on the site but will it work on a laptop too or no?

@kimberlymiller7885 2 года назад

Hello! I have my 8850 and my ink. I'm ready to do my setup.. If I do not have the bottle to put the ink in (only the syringes), can I just insert the needle in either side of the appropriate color hole on the printer? And what vendor on Etsy did you get the empty bottles?

@HangryMuscle 2 года назад

Hi, Awesome. You can clean the ink bottles out that came with the printer. I don't think inserting with a needle will work. I'm looking for one, the tops from the previous seller did not fit.

@izdiharaljabri5840 2 года назад

Hi bro , i am facing problem with loading paper especially cassette 2 can you explain how to solve it

@marielab8774 2 года назад

Can you add the links where did you get the new ink (to converted in Sublimination) tyia

@HangryMuscle 2 года назад

Hi, I only use the printer for DTF. Haven't tried sublimation. Here is where I purchase my DTF Ink. dtgpro.com/cicproduct/dtf-pro-eps-ink-1l.php?afl=3277

@sharonpinhasgdj3677 Год назад

Hello and thank you for the video! For this model et8550 do you need to connect a tank for waste white ink like on other epson printers like L1800, SC P600, XP15000?

@HangryMuscle Год назад

Hi you're welcome. You don't "need" to but having an external waste tank is more convenient than having to keep buying new maintenance boxes. All the color's ink waste go to the maintenance box/external waste tank,not just white.

@zacharywilliams6013 2 года назад

🔥🔥🔥

@HangryMuscle 2 года назад

thanks

@jimmieking7417 2 года назад

😂 I’m here now after getting your info!

@HangryMuscle 2 года назад

@@jimmieking7417 awesome, hope it helps

@daygorock5494 Год назад

Can you use dtf ink after sublimation ink has ran out or has been removed from this printer?

@secretofchakra9529 Год назад

Hey Buddy I love the content and very interested in this printer right now but I heard a lot of bad reviews once you convert it to dtf the white ink will clocked after a while so how is the maintenance on this and are you happy with the purchase right now ? Thank you so much

@HangryMuscle Год назад

Thanks bud, it all comes down to the individual and how you maintain the printer, alot of people are just getting into DTF and it's easy to mess up your printer if you don't know what you're doing. I've use other converted DTF The Et-8550 is my favorite printer, i get the best colors and I have the most experience with it. Any issue that comes up I can usually clear it right away.

@ShaSha-wh8my Год назад

Thnks for the video. I’m going to try with the rollers in first, a bit nervous about removing them. Have you wash a garment with the DTF ink? The DTF hack with sublimation ink faded some.

@HangryMuscle Год назад

Its super easy to do. Yes it looks the exact same after washing. Some of my customers are stillwearing shirts I printed almost a year ago. Its not real DTF

@SaltLifeGeo Год назад

Did you have to get a software ? If so how much was it ?

@SladeGrovetv 2 года назад

How are you getting the white to circulate? If you let it sit, it will cause problems with the printhead and you can't simply take the cartridge out and shake it.

@HangryMuscle 2 года назад

There's multiple ways, and yes you can take the Ink tank reservoirs out and shake them. Watch this video for more details: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dgpQITIRXYk.html

@digstamps 2 года назад

What is the best l1800 or l8180 printer head?

@HangryMuscle 2 года назад

I haven't used the L1800 so I'm not sure.

@andrescastaneda5362 Год назад

Hi, Thank you so much, great video. I have a question and I hope you or someone in the comment section can answer. I have an epson 8550 but I already filled all tanks with inkjet. Can I still use it to print transfers? If yes how do I empty the tanks and clean the lines in order to refill with DTF ink? Please help. Thanks!

@HangryMuscle Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QS3mOtiHV_Q.html

@andrescastaneda5362 Год назад

@@HangryMuscle thank you so much!

@keshahinkle7532 Год назад

Probably a dumb question, but do you have to install the inkchip firmware for this printer like on the Epson XP15000?

@laialexandreaco8467 Год назад

That's a great question I was wondering the same thing

@clarissafrazier8004 2 года назад

So did you end up going with EK print for this model, because I didn’t find that EK Print supports this model, I’ve already got the xp15000 and been doing great for few months, and emailed them and they don’t support it for software

@HangryMuscle 2 года назад

No I use Acrorip

@litlsuz 2 года назад

@@HangryMuscle Thanks! This is info I needed. Almost bought another one but think I'll find a printer first.

@silvia0palacios663 Год назад

I have an ecotank 8500, is brand new, is the same? Can I convert it too?

@relighttttit1823 Год назад

Is there any run off ink that you need to worry about when doing DTF with this printer ?

@HangryMuscle Год назад

What do you mean?

@lilblack711 2 года назад

What do you think is the best 3rd party sublimation ink for the et8550 because cosmos photo black and gray is sold out?

@HangryMuscle 2 года назад

Not sure, I only use DTF inks.

@tiffanylee3901 2 года назад

I heard there is no such thing as phot black ink and it’s the same

@HangryMuscle 2 года назад

@@tiffanylee3901 I've only used this for DTF printing and the Inks are different as well as some of the colors. CMYKWW.

@melaniecross-king3819 2 года назад

for the cosmos photo black i just used reg black and i did wait on grey and bought about 4 to ensure i had some

@Littlemismartha 5 месяцев назад

Why the external tank do I have to do that or can I use the tank that came with it

@fame2394 11 месяцев назад

Hey bro wanted to ask hows the epson 8550 working for you for dtf?

@patriciaalvarez9638 5 месяцев назад

You should come to Houston and fix mine

@dandee28 Год назад

with eco solvent and dtf inks, does it clog the heads? are the colors much more vibrant compared to the dyed ink or do you not really notice a difference?

@HangryMuscle Год назад

Any ink will eventually clog, eco & dtf ink clog much faster when the printer is not well maintained. I've only done DTF, everyone loves my colors on my prints.

@yourunclesam6780 Год назад

Tell us what RIP Software use after the convertion? Thanks in advance

@TBruce1380 2 года назад

I would love to do this but I guess I would be taking a chance and breaking a $700 printer.... So I take the roller out & use the DTF rip software to control how the ink works? Any long term damaging effects? Thx man!

@shondafox 2 года назад

Any issues yet with not shaking the white ink? Have you installed a waste tank yet? What maintenance are you doing daily/ weekly?

@HangryMuscle 2 года назад

No not yet. Right now there's no need for a waste tank. I didn't have to do constant printhead cleans so the box lasted over a month. Also there's no chip resetter so you have to replace the box or the chip on the maintenance box. Daily/weekly I was just refilling ink, I just started shaking the inks. Other than that no other daily or weekly maintenance was required. I've pretty much only had to use the printhead clean function and I don't use it daily only if lines start to mess up.

@uglybarn3005 2 года назад

@@HangryMuscle can you tell me what the box/maintenance box is that you're referring to. Ty

@xZk18x 2 года назад

@@uglybarn3005 watch this video it will explain ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4A0Zy40Fc4c.html

@HangryMuscle 2 года назад

@@uglybarn3005 the maintenance box is where the printer sends all the wasted ink. When its full you need to replace it for a new box or reset the chip on the maintenance box.

@HangryMuscle 2 года назад

@@uglybarn3005 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4A0Zy40Fc4c.html

@shekirarawlings3159 2 года назад

With this printer would i need any special software for the dtf

@HangryMuscle 2 года назад

You won't need chipless software, you will always need a DTF rip software.

@letsmakemagic9066 2 года назад

Couple question what film would u run in it

@HangryMuscle 2 года назад

13x19 hot peel

@daveswimm1827 2 года назад

What do you use as a printer profile because the ET8550 is not a sub or DTF printer, will that work for 6 color sub printing?

@HangryMuscle 2 года назад

Are you talking about the ICC profile or the rip software?

@litlsuz 2 года назад

@@HangryMuscle I would like to know too. Thanks Hangry!!!

@HangryMuscle 2 года назад

@litlsuz I use Acrorip and Acrorip's default CMYK for my ICC profile.

@litlsuz 2 года назад

@@HangryMuscle Thanks Hangry!!! I'll keep watching!!!!

@princekings3272 2 года назад

Love this channel! Question, when you put in the DTF ink and did a print test, did you have to configure anything or get Acrorip? My black, blue and yellow are showing but the magenta and white aren’t? Thanks

@HangryMuscle 2 года назад

Thanks bud! No, I didn't the nozzle check should show all the colors WKCYMW. Run a print head clean or a power clean to pull ink into the printhead.

@princekings3272 2 года назад

You are a genius worked great after multiple print head cleaning! Thank you!

@HangryMuscle 2 года назад

I wouldn't go that far haha Glad it worked out 💪🏾

@abbysellsrealestate 2 года назад

I'm having the same issue now :( ...thought it was me, I was almost ready to send this back....sooo glad I stumbled on this question

@bethalvarez6956 Год назад

I haven’t watch the whole video yet but is there a way to add a mixer for the white ink or do you have to do it manually

@elotromexican Год назад

Any follow up on how it worked?

@barbiesainz1245 2 года назад

where do you put the white? in Photo Black and th gray? can you confirm?

@HangryMuscle 2 года назад

Doesn't matter, it can go in any of the channels

@lisaweaver3124 Год назад

Good morning I just came across your video can you please tell me why you have to remove the rollers?

@HangryMuscle Год назад

I have a video on the channel explaining the reason

@spunkybear1597 2 года назад

What about having to use chip-less firmware as part of the conversion? Any videos about removing the pinwheels? What about rollers? What about waste tank when doing maintenance?

@HangryMuscle 2 года назад

Its a chipless printer. I have multiple videos on my channel about removing the rollers and installing a external maintenance tank.

@spunkybear1597 2 года назад

@@HangryMuscle Sweet!

@spunkybear1597 2 года назад

@@HangryMuscle Do you sell the external maintenance tanks? About how much are they?

@HangryMuscle 2 года назад

No I don't, but you can make your own. Here's the waste tank video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lzOqtVKDczU.html

@thailafields6962 Год назад

I just got a Et 8850 and removed the rollers to make it a dtf printer but now my printer says it’s jammed and it’s making a loud clinking sound. How do I fix it ?

@HangryMuscle Год назад

www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

@ggvemini7873 9 месяцев назад

How do you know which white goes where ? Do those bottles come with the printer

@HangryMuscle 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AexGP9yctaE.html

@zpastock4204 2 года назад

What about white ink waste tank? Do we need one with this printer?

@HangryMuscle 2 года назад

Still remains to be seen, right now I don't.

@spunkybear1597 2 года назад

Still trying to learn. What is a white ink waste tank? Thanks.

@HangryMuscle 2 года назад

An external tank for the ink that is used during a printhead clean.

@SeanOliver5981 2 года назад

How did ypu learn to mix the ink? So that it won't plug the ink heads or dage printer

@HangryMuscle 2 года назад

I haven't, everything seems to be working and I'm almost through the first maintenance box.

@uglybarn3005 2 года назад

@@HangryMuscle what inks were mixed. DTF + ?

@HangryMuscle 2 года назад

@@uglybarn3005 None

@foolheadd3305 10 месяцев назад

Is there software that a Little lower cadlink to high for me with 9 kids plz help me

@creativesublimation7768 2 года назад

Hello, please, I need your help. I bought the 8550. I did the whole process, but when I print the colors, they come out wrong. First, it prints the white and then the color. Can you help me please?

@HangryMuscle 2 года назад

Hi, in print preview screen, check both boxes "print color first" & "color + white" both copies color & white should also be set to 1.

@Oscar-vg5xe 8 месяцев назад

Where i can buy the software for the printer 8550 when i convert to dtf ?

@HangryMuscle 8 месяцев назад

Here, Cadlink or Acrorip will work. dtgpro.com/ciccategory/rip-software.php?afl=3277

@tdsonley1 2 года назад

Man... I just converted mine to sublimation.. wish I would've saw this first..

@HangryMuscle 2 года назад

You can switch it by draining the inks and cleaning out the ink tanks. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QS3mOtiHV_Q.html

@rolandom 2 года назад

Does dtf work for any type and color of shirts?

@HangryMuscle 2 года назад

Yes any color and material works with DTF

@carloscamargo6625 2 года назад

Did you solve how to shake the ink in the tank ??

@HangryMuscle 2 года назад

Not yet, but so far its going on 2 weeks and I've had no clogs. I'm not printing everyday as well.

@carloscamargo6625 2 года назад

@@HangryMuscle Great, even if you must use the full white ink tank in a week, is not bad. Other question. The print head looks similar to the xp15000 or is more like the dx7 print heads, with dampers ??

@HangryMuscle 2 года назад

@@carloscamargo6625 I'm not sure, the printhead is completely covered on the 8550 its hard to tell.

@vanhalyn06 Год назад

Can you purchase the CISS system from China I see people talking about to shake the white up?

@HangryMuscle Год назад

Yes

@katrinapierce5638 4 месяца назад

Does this same steps apply to the Epson ET Pro 16600?

@icyborg6065 7 месяцев назад

did he removed the little wheels? the part that every epson converter usually removes a plate from inside so the DTF ink does not smear? I think I missed that part.

@HangryMuscle 7 месяцев назад

This is the old video. Watch this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AexGP9yctaE.html

@m_r_blackthunder 2 года назад

The most important part of the conversion is removing the rollers. Yet you failed to show any detail on the needed steps, tools, and disassembly of the printer (If needed) to accomplish roller removal.

@HangryMuscle 2 года назад

I didn't find a safe way of removing the rollers. I popped the far left side out and yanked the other side out, ripping the metal piece that was holding it in place. I recorded the whole process but its like an hour long, im doing a video just on that.

@kiethharvey2194 Год назад

@@HangryMuscle I need to see that

@JoseSalazar-lh3xl 11 месяцев назад

Mr @hangrymuscle I want to thank you for this whole video from start to finish I wanna let you know that I wish you the best and God bless you bro . Not everyone shares were they even get the Ink from and just from you simply doing that I have gained so much knowledge

@fame2394 11 месяцев назад

Im about to rewatch did he mention where to get ink?

@c10kid89 2 года назад

Would acrorip 10.5 work with this printer.

@HangryMuscle 2 года назад

Yes, here is how to set it up ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q_asJx9H_fI.html

@tuniciataylor2192 Год назад

Where do I buy the grey ink

@bengomez7344 Год назад

can i drain the sublimination ink to make it dtf ???

@HangryMuscle Год назад

Yes, why would you not be able to?

@suequiroz9702 2 года назад

Do you fix printer or can you do a one on one?

@JenLapent 11 месяцев назад

Can you do a video to show once printer is set up what to do on your computer as far as downloading cadlink goes and whatnot? I'm having a hard time finding a tutortial video on yt that really shows that from beginning to end.

@HangryMuscle 11 месяцев назад

Look on the channel or we can do a video call session. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

@alexleon-mm1uy Год назад

tienes algun contacto para conseguir el cabezal

@HangryMuscle Год назад

Gedat-spareparts.com

@user-cd5rk7hp3s Месяц назад

I follow your same instructions but when I use my rip software my black and white ink is not working even I fix ink Chanel plz guide what is the reason

@betinhosouza5262 2 года назад

Hello, how do you stir the white inks when printing, as the ink tanks are fixed, then how do you stir the white inks?

@HangryMuscle 2 года назад

Hi watch this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dgpQITIRXYk.html

@Zaim-group Год назад

Have you encountered a problem with this printer? Do you print on a daily basis? Is it true that dtf inks deteriorate the printer head and every six months the head must be replaced?

@venlo7113 9 месяцев назад

What's the answer to this?

@HangryMuscle 9 месяцев назад

@zpastock4204 2 года назад

Hi, what about the white ink waste tank?

@HangryMuscle 2 года назад

I haven't tried installing yet.

@zpastock4204 2 года назад

@@HangryMuscle and you haven’t had any issues with white ink yet?

@brialo6016 Год назад

New to your channel do you have to take the rollers out to print

@HangryMuscle Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-58uiuYDz86A.html

@daphnenoble8617 Год назад

Thought you had this printer already. Is that how you made the shirt you have on?

@busybitch3401 Год назад

Question, it may be dumb and or already talked about new to DTF why do you need to remover the rollers from the printer?

@HangryMuscle Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-58uiuYDz86A.html

@VidaMigrantes 3 месяца назад

Can I convert an epson f170 to dtf too?

@iamkjj4908 19 дней назад

Hello. My ink is covering in blue instead of white. I’m using acrorip 10.3. I set ink channels to match the order I poured the ink. Any idea how to fix the said issue?

@HangryMuscle 19 дней назад

Update to atleast Acrorip 10.5.2 or set the first two channels opposite to the tanks in the rip settings

@iamkjj4908 19 дней назад

@@HangryMuscle thank you

@alfredoboys Год назад

What type of heat press are you using ?

@HangryMuscle Год назад

Transpro 16x20

@ronaldclapp56 2 года назад

Need to take out rollers

@HangryMuscle 2 года назад

I ended up just having to rip them out. I couldn't get to the screw that was holding it in place on the right side.

@DBAMoe 2 года назад

Do you need the wide format one?

@HangryMuscle 2 года назад

Yeah you do you if you want to make anything bigger than just kids clothes. Lol

@pixelbat 2 года назад

But how do you deal with white ink settling? Do you shake your whole printer? :P

@HangryMuscle 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dgpQITIRXYk.html

@deborahloreal270 Год назад

Can I take the rollers out before putting the ink in? I'm still awaiting the inks arrival lol

@HangryMuscle Год назад

Sure

@csq530 2 года назад

Hey can the EPSON ET 15000 be converted too?

@HangryMuscle 2 года назад

No, the EcoTank ET-15000 can not be used for DTF

@csq530 2 года назад

Hey Hangry the shirts in your web site are printed with the DTF of your videos? I love them! I may buy one!

@HangryMuscle 2 года назад

Hi San, yes they are! Go for it, then you can feel the DTF for yourself.

@csq530 2 года назад

@@HangryMuscle hey i went to buy the Tshirt but no PAYPAL or just regular credit card processing as a matter of fact it says that the amazon pay is no available for your website!

@csq530 2 года назад

@@HangryMuscle HANGRY!!! The shirt was AMAZING!!! I must say that i found it at the beginning a little expensive but when I saw the extra stuff (specially the bag which I needed) I was pleased!!! I think that the quality of DTF is better than DTG! Which of the INKS that you have advertised did you use for that shirt! I hope that the print on demand companies move to that medium so we dont have to worry so much about quality standards! Did love the stickers too. Who makes your stickers?

@HangryMuscle 2 года назад

@@csq530 awesome, glad you love it! 💪🏾💪🏾💪🏾 Yes, the quality is definitely the best and it lasts a long time. I use the Dtgpro ink and film. DTF Ink (CMYKW): dtgpro.com/cicproduct/dtf-pro-eps-ink-1l.php?afl=3277 DTF Film A3+ (13x19): dtgpro.com/cicproduct/dtg-pro-transferpapa3plus.php?afl=3277

@HangryMuscle 2 года назад

@@csq530 I had a local supplier do the stickers awhile back, I don't remember the name of the company.

@Littlemismartha 5 месяцев назад

So u have 2 ways to convert this one without using a external tank and the other video showing u using one right?

@dcondorcbr 9 месяцев назад

Hi there Paper out in cassette 2 ? ( Printer needs to check Print Head ) Just converted, tray is out . need to use a feeder on top. Please help >>>

@HangryMuscle 9 месяцев назад

Remove the bottom trays completely from the printer. In the printer preferences select auto or rear feed as the paper source

@dcondorcbr 9 месяцев назад

@@HangryMuscle Thanks for your help But I don’t understand why don’t want to print .

@dcondorcbr 9 месяцев назад

Keep telling me paper out cassette 2. I can’t use the feeder on top .

@HangryMuscle 9 месяцев назад

You'll need to follow the instructions in my previous comment, if you still can't get it. Visit my website to sign up for a video call session. I'll get it fixed. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

@dcondorcbr 9 месяцев назад

Tell me please what is next

@francescocaradonna8028 2 года назад

SI POTREBBE ACQUISTARLA GIA' MODIFICATA ? DOVE?

@HangryMuscle 2 года назад

Not yet, soon!

@TheDmf1979 2 года назад

Can I use Acrorip 9.0.3 with this? X

@HangryMuscle 2 года назад

You can use the Ekprint demo. www.eukondigital.com/ekprint/demo_download.asp

@brendafogerty1685 Год назад

@@HangryMuscle what printer model did you say you had when getting the software demo? The epson 8550 isn't in the drop down menu to choose.

@PulseCheckCorazon3 6 месяцев назад

What software do you use? Cadlink $495 or do you need any software to print DTF?

@HangryMuscle 6 месяцев назад

I use both Acrorip and Cadlink, mainly cadlink and yes you'll a rip software in order to print DTF

@jeanettehead3358 Год назад

How did you take the caps off?

@HangryMuscle Год назад

Twisted them off

@dkastra26 9 месяцев назад

why dtf over eco solvent or sublimation? im new in this hobby

@alexmoreno5894 Год назад

Does it have to be a 8550 machine or can I buy a 4800 machine epsilon

@HangryMuscle Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y_49xu3cuoc.html

@epepmuexxx 2 года назад

Does epson L850 work for dtf?

@HangryMuscle 2 года назад

Not sure, if you can find a DTF Rip Software for it, It probably will.

@reneemickens6653 2 года назад

I’m so confused, I’ve seen videos where they didn’t remove any rollers in the new printers only converted older models

@HangryMuscle 2 года назад

Not all the printers are the same. This printer needs it rollers removed. Here's an example of what your prints will look like with the rollers still in. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-58uiuYDz86A.html

@uglybarn3005 2 года назад

I have a converted epson and I eventually removed all of my rollers.

@HangryMuscle 2 года назад

@@uglybarn3005 Nice 👍

@kraftybabe3 2 года назад

Why do the rollers need to be removed.

@HangryMuscle 2 года назад

@@kraftybabe3 The pinwheels on the rollers that the design passes under will scratch the design as it exits the printer. Watch this to see an example of printing with the rollers in.

@monmolmarket Год назад

hello after of all this time, works good??

@HangryMuscle Год назад

Yes

@Sivarwraps Год назад

Can you tell the purpose of removing the rollers

@HangryMuscle Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-58uiuYDz86A.html

@tyhinchcliffe8867 Год назад

Does this printer still function after 12 months,

@HangryMuscle Год назад

Yes

@deefreshgaming4937 Год назад

I converted today and every print I get smudges .. how can I fix this?

@HangryMuscle Год назад

Hi for help with printer issues. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

@onespeedlite 9 месяцев назад

Wouldn't it be easier if you used a small funnel to refill the bottles?

@HangryMuscle 9 месяцев назад

Haha yeah, i use funnels to refill my ciss . ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AexGP9yctaE.html

@ilzstdro6 Год назад

Mine keeps printing yellow back ground. Behind the images even if it's mirrored. Brand new out the box same process. Color same color order.

@HangryMuscle Год назад

Hi, depending on which Acrorip version you have, anything below 10.5.2 you may need to swap the first 2 channels in the rip settings. Example your ink order is KWCYMW in the ink tanks, you would use WKCYMW in the rip settings. Or you can update Acrorip, they fixed the issue in 10.5.2

@ilzstdro6 Год назад

Aahhhh okay.. I'll update. If anything 👍 Thanks

@ilzstdro6 Год назад

Oooowwwffff 💆. That worked. 👍🤙

@ilzstdro6 Год назад

1 more Q. My black keeps coming out faded or greyish. The print head is not clogged. Blacks dotted line shows on the wet sponge. Prints black on plain paper. But turns faded when I print white background with it.

@suequiroz9702 2 года назад

I followed your video & clean out the print head put it back together & now it will not print ink.

@HangryMuscle 2 года назад

Run a power clean