How to Create Easily Removable Supports in Cura: Roof & Floor Interface Settings

Подписаться 59 тыс.

Просмотров 98 тыс.

50% 1

Download The FDM 3D Printing Glossary Here:
pages.itsmeadmade.com/fdm-glo...
How do you get your models to stick to your supports while allowing them to be removed easily?
That is the question this entire video is focused on. The topic is all focused on your Cura Support interface. Specifically targeted to your floor interface and your roof interface. There are two types of supports; the first adheres to your print bed, and the second is the kind that adhere to your model. That is where your floors and roofs come in handy to understand. I break down how to find your perfect interface settings by showing how to test and discover your perfect numbers.
I uploaded the test models I created on thingiverse for you to follow along. Download them here:
TEST MODELS: www.thingiverse.com/thing:535...
JOIN THE FREE RU-vid COMMUNITY DISCORD HERE:
🔴 / discord
JOIN THE PATREON HERE:
🔴 / itsmeadmade
If you want to skip ahead check look here:
00:00 - Intro
2:15 - Intro to support interface
4:00 - Getting your settings displayed
5:30 - Floor Supports Settings Explanation
7:18 - Diagram Explanation of Floors & Roofs
13:28 - Support Bottom Distance Print Tests
18:03 - Floor Density Settings
18:55 - Support Floor Density Print Tests
25:00 - Floor Support Settings Overview
27:01 - Roof Interface Density
27:45 - Roof Interface Z-Distance
28:16 - Roof Interface Z-Distance Print Tests
32:27 - Roof Interface Density Tests
33:00 - Roof Interface Destiny Print Tests
40:00 - Final Test Print Set Up
41:02 - Fian Test Print Test
43:00 - Final Settings of Roof & Floor Interface
----------
3D print Slicer I use:
ultimaker.com/software/ultima...
My Cura Slicer Setting Video:
• My Cura Profile Settin...
3D Printers I own and recommend:
FDM Printers I Own
Creality Ender 3:
amzn.to/2OKFHJO
Creality Ender 3 Pro:
amzn.to/3vetq11
Creality CR-10s:
amzn.to/3l4nQK4
SLA Printer
EPAX E10 8K 10.1" Screen Resin Printer:
bit.ly/E10-8k
The Epax Hard Resin I use:
amzn.to/3Mn821z
Wash and Cure Station:
amzn.to/3bWY5bF
Ender 3 and Ender 3 Pro Upgrades:
Glass Bed:
amzn.to/3czNgvx
Capricorn Bowden Tube:
amzn.to/2PTjN83
Ender 3 Pro Silent Motherboard:
amzn.to/3epNuHR
Tools I use for 3D Printing:
Get Perfect Bed Level:
amzn.to/38tDsBR
Glue Sticks for Adhesion:
amzn.to/2PO54uV
Small Pliers Set to Remove Supports:
amzn.to/3rC1a6u
Follow Me on Instagram: / itsmeadmade
Website: www.itsmeadmade.com
Music Bed From: / kodymusic_o. .
Open Music from: www.bensounds.com

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 330

@micahellis45 3 месяца назад

Helped a lot thank you! Fighting sleep at 3am to help me learn to print. This is the way

@Kcol1316 3 месяца назад

Exact same situation here haha, This is the way

@swwolf3640 Год назад

AN ABSOLOUTE MASTER CLASS. An amazing in depth tutorial that is massively easy to follow for someone who has just started 3D printing. Love it. Subscribed

@ItsMeaDMaDe Год назад

That’s great I’m so glad it was helpful to you.

@SuperWebtraffic 11 месяцев назад

Can ask for a link to a past video or a future video do you have a video to make a vase with external writing such as I Love You Mom!

@Ocirew 3 часа назад

This was the most helpful source of information I found about interfaces and the settings around it in the whole internet.

@larryfroot Год назад

The more you put in, the more your students get out. It's so important to not just be given good settings, but to have clear, real world examples of what is actually happening. In short, why the chosen settings have been chosen. You, sir, are raising my game and I am very grateful to you for it.

@emilcost8613 2 года назад

What a complete lesson on upper and lower supports! Excellent. I really appreciate the real life example test prints. To see the effects by printed results is so important in teaching the subject. Thanks for another great one!

@ItsMeaDMaDe 2 года назад

No, thank you once again for the kind words! I firmly believe seeing is believing. I know just telling people what the settings are doesn’t help them when things don’t work. My goal is always complete understanding. This topic was one of the most important hence the length.

@Mr.Thermistor7228 Год назад

This lesson 100% needs to be mandatory viewing for anyone even thinking about printing. This is absolutely singlehandedly the most important lesson I've ever seen when it comes to printing. You could not have done a better job at detailing this immensely important setting. I'm amazed bro, truly incredible and I want to thank you so much for sharing this info and demonstrating it the way you did. Simply fantastic in every way. Also, how TF do you have DARK MODE CURA?!?! I can not fckin stand how white and bright cura is

@ItsMeaDMaDe Год назад

Wow. First, thank you. That truly means a lot I put a ton of work into this series I just wanted to explain what no one else has. It can be a confusing topic for a lot of people. Also I have other tutorials going through Cura. Here is the one I explain how to change the theme. Best of luck and happy printing. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ChfH6wnX5Wc.html

@bryen88 Год назад

Amazing tutorial/advice. I used your settings on my Ender 3 S1 Plus and now I'm printing better than I ever have. thanks for sharing the knowledge!

@xZeroCCx 2 года назад

I've watched all of your current Cura Tutorials and while they are all full of useful information this video was the most helpful to me so far! Going step by step and showing the effects the settings were having on the print made everything so clear.

@ItsMeaDMaDe 2 года назад

Wow thanks so much. I’m really glad it helped you!

@bryandooley5453 Год назад

This is an amazing video - very well done sir! And thanks for being in Cura today! 😀

@PowerAirSimulations 2 года назад

Excellent video Chris, Thank you for taking the time to make it.

@ItsMeaDMaDe 2 года назад

Thanks!! It was a lot of work for sure. But I’m hoping it helps a lot of people with this difficult topic.

@mariocampbell6448 8 месяцев назад

I don’t usually leave comments on videos but I been watching your videos pretty much as long as I been 3d printing( which is not long) I recently lost my old settings for my supports due to computer failure and i followed this video to a T and I have never had supports just fall off and come off so cleanly ever. Honestly the best educational video for supports. Thanks for what you do

@ItsMeaDMaDe 8 месяцев назад

That’s awesome thanks so much for the comment and I’m glad I was able to help you!

@felixmendez6294 6 дней назад

Holly crap that was a long video totally worth it

@jaredbourque4199 2 года назад

Thank you , I never knew about interfaces. I feel pretty confident in working with the settings now.

@ItsMeaDMaDe 2 года назад

Your welcome best of luck

@senzhou Год назад

Thank you so much for your time on these fundamental tests, which are very helpful. Your explanation is so clear and easy to understand. Good job!!!

@ItsMeaDMaDe Год назад

Your very welcome I’m glad it helped.

@JentuckyFried 4 месяца назад

This is the best 3d printer setting video of any type that I have ever seen.

@Ryan30z Год назад

I was going to do pretty much these exact tests myself. This video has saved me tons of time, thanks man

@ItsMeaDMaDe Год назад

No problem glad it was useful to you.

@heinzd5523 11 месяцев назад

Thank you so much for your tutorial. Since I started to watched your Cura videos, my prints have improved so much.

@ItsMeaDMaDe 11 месяцев назад

That’s fantastic I’m really glad to hear that. Thanks for the comment!

@idamama Год назад

Thank you so much for going into such detail and doing the tests. You are a great teacher. I will definitely continue to go to your videos to learn more as well as your discord.

@BravoBMadd Год назад

Wow. I've been winging it for the past 2 months since I started 3d printing. This video is a game changer. Such great information explained in such a great way that even I as a beginner understood it.

@ItsMeaDMaDe Год назад

That’s great I’m glad I could alleviate some of your pain. Best of luck Printing now.

@NeilLund 2 года назад

I appreciate your thoroughness and attention to detail.

@ItsMeaDMaDe 2 года назад

Thanks! I’m definitely would rather give all the details than just some of the details 😁

@robertpelland5649 2 года назад

Truth be said, I had a problem getting through your long and tedious intro, however that being said I would like to add the following. This has to be one of the most informative, and clear videos I have yet to see on RU-vid. Clear and multiple examples, not to mention explanations that are not normally seen. Kudos and a big thank you.

@ItsMeaDMaDe 2 года назад

Well thanks for your honesty. I’ve got a bit of a babbling issue I like to talk 😅. I’m a very visual person and I’m really trying to make videos anyone can understand. When I was getting started I could never find examples so I always try to show them when possible. (See I’m rambling even in text) Nonetheless thank you and I’m truly glad it was helpful.

@L3x4Pr0ne 6 месяцев назад

You earned a sub for this. Not just explaining well, but both diagrammatic and practical examples. Well done.

@DDAschool 6 месяцев назад

Thank you so much for this master class, I can't wait to watch and learn more from you. You have literally saved all of us 3 - 6 months of time, just trying figure this out on our own would be a nightmare. Thank God for your wife's advice.

@armandomarrero9097 Год назад

Amazing tutorial. Got to do the rest of your series. I thank you

@RashidAliyev Год назад

Thank you for detailed video!

@emilcost8613 2 года назад

I had five minutes left to watch and just watched later. Your ending was very funny! I love how you ended with your last lament and then an abrupt beep! Funny way to end the video! I have about five models that need painting. I can't seem to stop printing.. I guess I'm addicted to the sounds of my printers whirring away behind me in my office. Love printing! Great comic relief at the end!

@ItsMeaDMaDe 2 года назад

Ha ha. Yeah im over Cura supports. Love teaching but been in them non stop for 3 weeks making these videos. Im right there with you it’s easy to get a back log of painting projects. Im hoping to put out a few fun paint projects after this. I got a new toy I’ll be revealing next week. 😬 Thanks again glad you like the end 😅

@abiggs66 2 года назад

Thank you for all these great videos, keep it up please. 🙏

@ItsMeaDMaDe 2 года назад

I have been one more video on supports I’ll be putting out at the end of the week. I’m really glad you enjoy them.

@alixezman5168 2 года назад

Woooow. Really this was the best video I watch referring to support settings. I am sure after I tune my printer as you explained, I won't have issues with supports any more. Your videos made me love cura, and painting as well :).. Thanks for your efforts

@ItsMeaDMaDe 2 года назад

Wow back at ya! Thank you so much. I’m really glad my videos could help you. Best of luck and happy printing!

@njohnsonII Год назад

Wow. Thank you for such a well structured video with practical advice aways. I feel like I just took a class that gave me the information I need to dial in my supports 🙂 Cheers!

@ItsMeaDMaDe Год назад

Wow thanks so much. My goal was to inform everyone with everything you need to know. Glad you enjoyed it. Thanks for the comment.

@davidweaver4388 Год назад

Excellent. Best video I have ever seen describing supports. Well done.

@ItsMeaDMaDe Год назад

Thanks so much. Glad it was helpful

@Sirant100 Год назад

WOW!!!! One of the most helpful videos seen on 3d printing!!!! Here there are my values for Artillery X1 at layer 0.2: support wall line count: 0; support density 10%; Support top distance 0.3; support bottom distance 0.4; support interface thickness 0.6 (all); support roof density 50%; support floor density 30%. It's incredible HOW EASY they peel off and how good is the result!!! Let me know if that works for anyone!!!

@ItsMeaDMaDe Год назад

Thats great! I'm glad it helped you!

@constantinbarca3339 Год назад

You are very good at what you do. You are meticulous and have a special didactic spirit. Only now I understood these settings from the CURA.

@ItsMeaDMaDe Год назад

Thank you. I’m glad it helped you.

@VyperZConcepts 2 года назад

Great video. Very informative. Your explanations are clear and not overwhelming to a newbie. Thanks

@ItsMeaDMaDe 2 года назад

Awesome glad you liked it! That is my goal to break it down for anyone to understand. Supports can be very confusing with all the different settings.

@carolmatt2959 Год назад

Video is long, but you did such a great job of explaining and showing me what the support settings actually do! Thank you!

@ItsMeaDMaDe Год назад

Glad it helped. Yeah it’s a lot to explain in one video. 😅

@Engineerpsy Год назад

Amazing lesson! Thank you very much for spending time and sharing your knowledge!

@ItsMeaDMaDe Год назад

Thank you! And Your very welcome!

@joneslu1377 7 месяцев назад

Beautiful print after all these experiments! Thanks, man!

@kspec2001 Год назад

how did YT not suggest this video for me? :| thank you for the video. at first i thought 40+ mins was gonna be a slog to go through but honestly it wasnt bad at all! understanding each setting in such a dynamic program like Cura honestly is important.

@ItsMeaDMaDe Год назад

Well first I’m glad I didn’t slog on 😂. I’m really glad it helped you and I’m glad you found me! Happy printing.

@9nthst Год назад

Damn good video. I had struggled with some of the terminology and usage for these settings but now it makes sense. I'm using your video guide for my next prints. Thanks a ton!

@YoSpiff 8 месяцев назад

Thanks. Very helpful. I have realized my problem with supports was the interface and Z distance for it. This gives me some good explanations of the different settings and some figures that should at least be in the neighborhood.

@HaidarHasani 2 года назад

this is so underated tutorial for cura. thanks for the efforts

@ItsMeaDMaDe 2 года назад

I’m glad it was helpful to you. Thanks for watching.

@TAJPEJ84 9 месяцев назад

Thanks for the video, I was looking for this information for a long time.

@ItsMeaDMaDe 9 месяцев назад

Glad it was helpful!

@JaysPrints Год назад

super informative, thank you for walking through this

@DesainCAD Год назад

good explanation , thanks buddy

@OurHavenStuart Год назад

Thankyou, your gifted with excellent communication skills. Its awesome to see you using them to help others. 🙏😊

@lizarthur2915 6 месяцев назад

Thank you so much for explaining these Cura settings! Excellent information that I needed!

@zoopyprintz Год назад

Thanks a lot for this video man! Super helpful.

@92valver Год назад

What an amazing video. One of the best tutorials I've ever seen. Well done! The thought and test procedure was beautiful. Could you do a follow up video with 0.2mm layer height.... For science.

@tlynn4239 7 месяцев назад

thanks for this detail 3D support settings.

@topflight250 2 года назад

What a clinic on supports. I'm going to watch the rest now (and of course subscribe). Great work man.

@ItsMeaDMaDe 2 года назад

Thanks so much. I really hope it helps you out.

@topflight250 2 года назад

@@ItsMeaDMaDe it'll definitely help. I'm going to share your video to everyone that asks for help with supports. I'll be doing the test prints today with my machine with your video as a guide to dial it in. Any chance at a video with tree supports?

@ItsMeaDMaDe 2 года назад

@@topflight250 that’s great thanks so much. Funny you ask I’m doing tests and research now on tree supports your not the first that’s has inquired about them. They are a little more tricky. Want to make sure I cover everything for the video to help people.

@StephenGibsonRuRa 6 месяцев назад

Very informative. Thank you.

@alfredbucket848 6 месяцев назад

Thank you so much for this. I was so frustrated with getting supports out without ruining the piece. Thank you!

@joelstolarski2244 9 месяцев назад

Thanks so much for this amazing effort on the video.

@SuperWebtraffic 11 месяцев назад

I've watched a bunch of your videos and I'm someone who doesn't subscribe much but you got my subscribe! Please keep up the helpful videos

@ItsMeaDMaDe 11 месяцев назад

Thanks so much. I appreciate the sub!

@SuburbanPrepper1776 Год назад

Awesome video. Thanks for putting the chapters in, very helpful overall

@ItsMeaDMaDe Год назад

You're very welcome! Glad it was helpful.

@jesusbermudez1764 Год назад

Excellent scientific approach to the issue!

@ghostwheel9935 2 года назад

Excellent video. Clear and concise .

@ItsMeaDMaDe 2 года назад

That was the goal. Thanks!!!

@uselessengineer669 2 года назад

Thank you so much sir for teaching very nicely with practical. I hope u continue this series. Love form India ❤️

@rohailahmad8966 Год назад

Huge thanks for this - currently troubleshooting my printer and you saved me a LOT of time with this helpful video 👍

@ItsMeaDMaDe Год назад

Glad it helped!

@raygilbers8274 11 дней назад

Wonderfull video and all your other tutorials I see my prints getting better and better, Thanks a lot and keep up the good work!

@chester_ville_4066 Год назад

My Ninja thanks for all the timed and hard work.

@ItsMeaDMaDe Год назад

Thanks so much. You are more than welcome hope it helps you!

@3dw3dw Год назад

That taxed my attention span but it was damn well worth it. Thank you for dragging me down this road. Subscribed.

@ItsMeaDMaDe Год назад

I’m sorry it was taxing (it was for me too so much info to give) but I’m glad it was useful for you.

@rc_crawler_zigzag84 Год назад

Hello. Véry véry interresting this tests !!! Thank you for all results !

@pauldavisson4351 2 года назад

At a beginners level, awesome.... THANKS FOR YOUR TIME

@ItsMeaDMaDe 2 года назад

That was goal. Glad you liked it. Thanks for the comment.

@oljobo 2 года назад

Thank You‼️ Loved it 🥰 Learned a LOT. Subbed

@ItsMeaDMaDe 2 года назад

Thanks glad you got something out of it!

@GMANGaming209 11 месяцев назад

Amazing video 👏

@dnvm84 2 года назад

Hello, let me say job well done. You did a very nice job explaining of what each setting does. And then actually showed us with a physical model. Thank you.

@ItsMeaDMaDe 2 года назад

Thank you so much. I’m glad you enjoyed it. Hope it helped.

@dnvm84 2 года назад

@@ItsMeaDMaDe Hello, yes it was informative. While watching your video I had CURA open so I could follow along.

@nicki3042 Год назад

Found this video looking for Cura ‘support’ 😂 Watched aaaaall of this series. Brilliant. Subbed. 😊

@ItsMeaDMaDe Год назад

Great. I’m glad it helped.

@rjc0234 Год назад

fantastic video!

@ItsMeaDMaDe Год назад

Great glad you liked it

@jackcampbell4465 Год назад

Fantastic! 👏 👏 What a great drill down!

@ItsMeaDMaDe Год назад

Thanks so much hopefully it was able to help you

@ashleyarundel3134 5 месяцев назад

comprehensive video - thank you. Liked and Subscribed!

@CritterRacing 8 месяцев назад

Wow excellent info

@ergehemm Год назад

Sehr gutes Video, hat mir sehr geholfen.

@IceCat143 4 месяца назад

Very helpful video.

@Birchmachine 11 месяцев назад

Very usefull, thank you! Now it is clear for me, just need to get those test stl and try them on my printer.

@BVieira30 Год назад

Cheguei aqui de paraquedas e devo dizer que foi uma aula completa! Gostei muito da explicação de como cada elemento da configuração funciona, gostei de ver você testando, tudo muito bom! Vou seguir o passo a passo para chegar no resultado satisfatório na minha Ender 3 S1.

@pbl6888 Год назад

Thanks for that very informative video.

@ItsMeaDMaDe Год назад

Glad it was helpful!

@wickus7123 11 месяцев назад

Just started 3D printing and your video helped me so so much , thank you for this. Definitely giving you a sub and watch all the other vids you have. I hope you finally got out of Cure and painted something 🤣

@ore4133 2 года назад

Great explanation and patience.

@ItsMeaDMaDe 2 года назад

Thanks so much.

@Bruceanddenise 4 месяца назад

Great video! I have printed several lovely cubes with zero supports on top. 😂. Always more to learn!

@Gengh13 11 месяцев назад

Very nice guide on how to tune your support interfaces.

@blewprent 2 года назад

Thank you for this video.

@ItsMeaDMaDe 2 года назад

You are so welcome. I truly hoped it helped you!

@Offcut55 2 года назад

Great vid learnt a lot. Thanks

@ItsMeaDMaDe 2 года назад

Awesome so glad to hear it!

@CJICantLie 2 года назад

Great video. Love the DOE approach.

@ItsMeaDMaDe 2 года назад

Thanks!!

@ItsMeaDMaDe 2 года назад

Thanks!!

@DialetoNerd 2 года назад

Amazing video 👏👏👏

@ItsMeaDMaDe 2 года назад

Thanks so much. Lost of testing but great results

@dfoosdc Год назад

thank you for sharing your skills.

@ItsMeaDMaDe Год назад

You are most welcome. Best of luck.

@NAVCOAU Год назад

Excellent video and tutorial, Cura will only lay support at the same interval as the layer height for the model. so in your case 0.1mm is the layer height so that will be the height at which the support will be laid. So a test of 0.3mm is a gap of 3 layers or 0.3mm. But a support height of 0.35mm will also be a gap of 3 layers or 0.3mm. The same as the 0.25mm support is in fact a gap of only 0.2mm not 0.25mm!

@ryckyto7460 3 месяца назад

Your videos are really helpful! Thank you for making them. I there any way to change the support layer height?

@arkangelMX2009 3 месяца назад

Good Job ma friend!, thank you!

@felipecastilloappas Год назад

Excellent!!!!!

@ItsMeaDMaDe Год назад

Thank you!

@yagoubalabbad1249 Год назад

Yr perfect man Thanx!!!!

@ItsMeaDMaDe Год назад

👍

@BombowaKunaFPV 6 месяцев назад

First of all - such a grate video! Thank you for that! What more I can say is that i recomend using an Support Roof Horizontal Expansion (0.4 mm is my go to). It gives the eges more straight flore for the next layer to print :)

@Abedeuss Год назад

Great video. I've been having massive issues with inconsistent and hard to remove roofs, bottom supports and interfaces...

@Lohtex Год назад

Great video series, one note that seems to have been glossed over the support top and bottom z-distance needs to be a multiple of the layer height, or cura will just round it up anyway. so say you are printing at a 0.1 mm layer height, then your 0.35 and 0.4 are the same distance as far as cura is concerned.

@dinkyemg Год назад

I was just going to point this out. You can tell in the cura preview that it always rounds up based on your layer height. Will save people a lot of time in testing if this was pinned somewhere

@alirezabadiee8155 2 года назад

Respect Super useful 🙏🙏🙏 Thanks so much 🙌🙌🙌

@ItsMeaDMaDe 2 года назад

You are welcome. Glad it was useful to you.

@AfterGlow2188 Год назад

How do you paint a spiderman??? Seriously well done, I didn’t really want to get into a 44 min video on supports, but it went by fast and your explanations were easily understood. Thx.

@ItsMeaDMaDe Год назад

Ha ha. You made it to the end! I actually did few videos since then painting Spider-Man. 🤣😂 I’m really glad you made it through and I truly hoped it helped it’s a loaded topic. Best of luck printing and thanks for the comment.

@AfterGlow2188 Год назад

@@ItsMeaDMaDe hah.. I did, subscribed so I can check out your other videos, but have about 72 hours to successfully do this print for a bday. Also currently watching a hockey game and listening to a live band while doing so. I’m wired 🤪

@ItsMeaDMaDe Год назад

@@AfterGlow2188 ha awesome well best of luck. I hope it turns out good for you!

@AfterGlow2188 Год назад

@@ItsMeaDMaDe thanks and thanks for all the advice, this is such a fun hobby until you really need things to go well and your expertise is greatly valued 🙏🏻

@timzuiderhof5259 Год назад

This has helped and i getting to point flat surfaces better than use to be but doing test parts that have different angles on. the more the angle the worse the part looks?? suggestions?

@snakemasterthorno 6 месяцев назад

Dyslexia with numbers @ 1:15 is called Dyscalculia. :D Great tutorial. Testing my Enders right now and it seems i am getting the same results as you got. I am testing right now if Ironing makes any difference and if i need to adjust my floor settings if ironing is turned of or on.

@shayrlz 7 месяцев назад

Amazing video! Have you tested with thinner and thicker layers?

@stardustypsyche8468 7 месяцев назад

Awesome vid, very methodical, super informative, real technical detail without the typical lame attempts at color commentary.

@FlyB4UDie 2 года назад

How do you paint a Spider-Man? Once again you saved me , I needed information about supports and you delivered, thank you so much

@ItsMeaDMaDe 2 года назад

So glad it helped you! 😂🤣😂 thanks for asking. Finally! Here is one I painted without anyone asking. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Rm_w9BGuA3w.html