This is the process I perform on every FAT PlayStation 3 before I do anything else!
The 19 blade fan isn't absolutely necessary, but I highly recommend installing one. They can be found on ebay for ~$20.
The spray I'm using to clean with is 99.9% isopropyl alcohol, and I used some DeoxIT on that bit of corrosion I found on the edge of the board.
This is not the same 2032 battery socket I used in the video, but this looks like a good fit for this mod because it has pads for wiring the connector to: amzn.to/3ia0a6Q
DeoxIT Contact Cleaner - amzn.to/35Pzal5
Arctic Silver 5 Thermal Paste - amzn.to/2MpnIoy
Largest HDD for PS3 - amzn.to/34OqzNZ
Things I use all the time:
iFixit toolkit - amzn.to/2ZiyjXw
Soldering Iron - amzn.to/38Y61G6
Solder - amzn.to/34HUl7a
Soldering iron tip cleaner - amzn.to/2EJniov
Flux - amzn.to/35Pe7ir
Solder sucker - amzn.to/2PPp8up
Silicone Wire - amzn.to/35QoLWa
Auto Wire Strippers - amzn.to/2MnnIFn
Flush Cutters - amzn.to/394s265
99.9% Isopropyl Alcohol Aerosol - amzn.to/2Mo1vqG
Multimeter - amzn.to/2s44Y7b
*These are affiliate links. As an Amazon Associate I earn a commission on any purchases you make through these links. This really helps out the channel and I appreciate the help!*
22 авг 2024