How to Disassemble Frigidaire Countertop Ice Maker to clean hard water 

Thanks so much for the detailed instructions!!!

I just finished using this video to clean my own! We couldn't even use it because of how gross it got. Thank you so much for posting this!

Thanks for this I was planning on cleaning my ice makers, ( I have two of them). One point though. anything with compressor such as ice makers or refrigerators has oil in the compressor and should not be turned on right away after being upside down. You should wait a half hour to an hour for the oil to settle back down where it needs to be for the compressor to work so it won't be damaged.

Thank you so much for this video. Mine was making the LOUDEST sounds whenever pulling water to fill the tray and it was just hard water build up that needed cleaning. Such a helpful video!!

Thank you Osmond very much, with your step by step I was able to clean and enjoy my ice machine again.

Thank you for posting this. I need to do a deep clean on my ice maker and this will be very helpful.

Thank you so much!! This was exactly what I was looking for.

My ice maker arrived in the mail with a giant sticker that read "leave in the upright position for 24 hours before first use, so the coolant would be where it was supposed to be."

the plastic tube is prone to cracking and leaking. your method of pressing down on it will only accelerate the eventual cracking and leaking problem and then you'll need to take it apart again and replace the tube

I want to give a warning!!!!! when you take off the back cover, be VERY careful. I sliced my finger open badly on the metal back part.

Thanks it helped mine was not working right so thanks so much i really appreciate it

Thanks man, appreciate the video

After you turned the unit upside down did you give two days for everything to settle ?you turn it upside down, it can damage it if you don’t give it enough time to settle

Sick video

I’m hoping this will work for me, I believe I need to replace the switches because the water reservoir tray isn’t moving properly.

Really, I cannot possibly(even if I pause it) remember all the parts and screws. It’s easier to just buy a new one.

The ads was a huge turn off! thumbs down!