How To Disassemble / Open Ecovacs Deebot 

I have just placed an order for an Ecovacs Deebot. While researching the product found this channel. It is great to see a company officially supporting the right to repair by providing such detailed video guides. This should be marketed so that more people who care about this buy your products. By the way hats off to the presenter very skilled and thorough. Thanks for providing such valuable information.👍👍

This gentleman is a genius. He has helped me countless times with the small but BIG things that can go wrong with these robots. When they work-Brilliant! When they don’t 🤯 Just come to his channel and he’ll save you thousands!

So well explained. Thanks to both of you(videographer too) for a nice video.

Thank you so much !! I just replaced the main suction fan thanks to your videos ! Easy peasy. Thanks again❤❤❤

So beautiful and Good sharing video 🎁🎁🆗👌

Man! Many Thanks 🙏 You are A Pro!!!

Great video. Thanks for sharing

thank you, just fixed my debot 950's side brush motor by watching this video.

Shout out to the teacher and the camera man! Great video!

Hi bro thanks to your precious video I'm able to disassemly the T8 for engine asp replacement and now it's working again :) Greetings from Italy :)

UPDATE: Success! I am so happy. Thank you so much for generously sharing your knowledge! Watched your other video too on cleaning the LDS sensor. Hi, I tried to open the top cover where the sensor is and you've said that it can be quite tough but I'm worried that I will break it. Mine is the Ozmo 950. Is there a screw somewhere? As a result, I think I could not then remove the bumper safely. Please help advise as it's only my sensor that needs cleaning. I got to the battery. It was the top cover that was tough to remove (the one you prised open with your fingers, but I even used prising tools and it still would not budge).

Omg, this is the official Ecovacs channel ? This is awesome ! I was already satisfied by the robot but now you just gained a loyal customer for being transparent and discouraging overconsumption. The video was great and helped me clean and repair my bot. Thanks !

Very useful, thank you :)

A great help. Thanks

Thank you for your awesome videos. I have a deebot ozmo 610 that will run for about a minute indicating fully charged, and then suddenly the battery charge indicator falls to low and it goes back to charge. The battery is a new replacement and only a few months old. I have tested it with a meter and it is healthy. What could the issue be?

Good taking

A true master at work🫡

Hello, I have an LDS error issue, ive watched your other video and checked the rubber as well as made sure it is clean. sometimes it turns on but most of the time it doesnt spin. there doesnt seem to be anything blocking it. Would you advise i buy a new motor and try to install it? I have no repair centers near me. Is there something else that could be causing the issue before i get a new motor?

Hi there, I have a T8 and I am tried following your steps to disassemble it, but I got stuck at taking the bummer off. There is some kind of elastic things that holds the bummer and the main body, but most of all I can get the top off (the main body) like you did. Do you have a video (will you do a video?) of disassemble T8? Thanks

Hi! I have a deboot ozmo 950 series, model dx9g. Thanks to this video I understood that my problem is motherboard. I want to buy a new one, but I can't find it. Do you have any suggestion where I can buy a new one? I find just the motherboard for the dx93 model, but I don't know Iif it's the same.

hello, could you make a video about replacing side brush motors on a deebot? i have a t8+. thank you

Thank you for all the help. I’ve used your video several times. Can you please tell me how to find replacement screws?

I think I need to replace the side brush motor for the right side (red) on Deebot Ozmo 920, have watched your video but i cannot get the bumper off. I am assuming its the motor that needs replacing, the green side you can feel glides round nicely when you turn it and the red side clicks round, it is as if a cog is worn

very informative and to the point. Great video, thank you. What could be the problem when the anti drop sensors are perfectly clean, no water damage inside at all and it only travels in backwards?

I love watching this guy, so skilled 👍👍 However, my T8 has a fault that I've not seen mentioned here. If I remove the water tank, the T8 thinks that it's still fitted and is permanently in Mopping Mode, therefore it won't hoover carpets. I have tried the reset but that doesn't work unfortunately. Has anyone else come across this fault?

Good day sir, I took a pix of my “disconnected” video cable. Still figuring where it originally stick to. Will you be able to assist? That’s for omni x1 though

Hey mate! can you make a video on how to remove the main brush motor? mine seems to be slipping and is out of warranty.

This is great video, My N8 Pro just out of warranty and the main brush motor needs a replacement. I am not able to access the motor for replacement. Would that be below the motherboard ?

My Deebot will run for various amounts of time then just stop and power down. No lights and no sound. When I place back on the charger it will power back on and show it still has plenty of battery, usually around 87% or more. What do you recommend to fix?

Omzo 920 and 8t aivi water tanks are same?

Hello @ecovacstechnicalsupport5278. Thank you so much for the video! I have an N8 pro+. My top plate doesn't come off with just my fingers like in the beginning of your video. Any tips? My mapping stopped working so I'm trying to check LDS.

Hi, I have a Deebot T8. It was dropped and afterwards it won’t charge anymore. I get the red light error. I replaced with a new battery, the unit works just fine, when it runs out of battery it won’t charge again, red light. Which part of the board requires my attention for this repair? Thank you.

Man... I spent hours on getting that front upper faceplate removed, and he just goes and pulls it off like nothing 😅 I managed to fix the hardware problem myself luckily, but still have a problem: On the App the map always changes, even when mapping is completed, i name the rooms, next time sth like a box is in a room the app will just combine the rooms by itself, is there something i can do against that? You're doing Great work, and have my fullest appreciation, sir.

Hi. Thanks for the video. I have a Chinese version of t8 aivi+. It will not charge the battery anymore. I thought it was because of dead battery. Therefore I purchased another battery. Unfortunately it didn't help. The white light is blinking but nothing happens. Its stuck on 14%. I got at tips saying this is a known issue and I have to replace the motherboard. Do you know if I can replace the motherboard with a EU motherboard and getting a European version? Terje

Hi, I have an X1 omni, and the top cover seems to be stuck even after removing all screws. I could pull it from front and behind but seems to be something holding in center. Are there any additional screws or plastic hold in that?

I have a Deebot U2 SE. I took it a part and there is a black and red wire with clips on the end. I don't know where they go to put back together. Please..help!

Thankyou for this excellent service. I have followed all the steps and disconnected all the screws, however I am still unable to remove the top plate where the main switch is. Any advice would be welcome?

Dear my omzo 920 front wheel is scratchers on floor kindly reply thanks

Hi there, Is the fan motor same for all deebots. Can i fit n79se fan motor on my N8 plus.?

Can you make a similar video on the T20 Omni? It has many different screws, wires, and parts. I tried to follow this video for it and some springs fell out of the front panel when I took the top off and I don't know where they go

Hi, my ozmo - deebot interface connector is broken, may i ask you the part number or some pictures of it to find a new one and replace it? thanks a lot! (i mean the ozmo vibrating washing system female connector on the deebot t8)

Hello, thank you for your videos. I have a Deebot OZMO T8 AIVI where the right side brush doesn't work. I installed a new side brush motor according to your video, but it doesn't turn either. What can be the problem?

I watched your video and tried to open my Deebot to clean the vacuum motor as it recently sucked some water in. But unable to open the top portion with power button. I saw so many of your video and you just pull it out, but I am unavlble to do so even after lot of force. Any advise? I have N8 model, Thanks.

Hello can I check with you - the smaller 'square' motherboard that connects the bigger 'L' motherboard - is that the WIFI signal motherboard?

I need to change the motherboard of my dbx11-11 but can't find new or used ones. The only ones I can find are dbx11-21, but will these fit? Thank you!

Thank you for the video, mine stopped charging even the battery was at 90%, i tried my dock charger on my other bot and the charger works, tried the 950 on new charger and not working, opened it, no water damage, checked charging poles and looks good, what could the problem be?

Could you do this with a Yeeti Vac+Mop? I am having drop sensor errors and I want to open to see if there is water damage or if I can replace the drop sensor.

Is the teardown the same for T9+?

If i bought deebot product in Singapore and can you people provide service ? And that model in not available in india deebot t30 pro omni?

Hey man, Thank you for this amazing video. My robot is going backward for some reason. I cleaned the sensors and open the bumper and cleaned it, they are fine. Can you please help me to fix my robot? My robot is M81 pro.

Deebot ozmo 950, throws an error of dirty fall sensors. I opened it all the sensors are perfectly clean and not rusty, yet none of them are lit in the camera. What could be the reason? Are there fuses on the motherboard that are responsible for the sensors? Maybe there is some way to manually reinstall the software.

Hello Sir! Do you have a video where we can see LDS removal? Thank you sir!

Hi I have an issue with ozmo 950. I used in mop mode for morethan 50 minutes, the water tank will not come back easily if tried to remove it from deebot. I tried to pull out by using little pressure, the water tank will detached with main unit by giving a some noise. I think some vacuum will giving such cimplaint. How to clear this problem. Please guide me

@ecovacstechnicalsupport5278 Hello, I have a deebot 600 and I need to access the main brush motor to clean it because it doesn’t turn as it should (getting main brush tangled even when the brush isn’t on). But I can’t find a way to remove the bumper. I removed the bottom screws and the bottom part that holds the bumper in place but the bumper is still “stuck”. Is there a way to remove the top cover? I suspect that this is what prevents me from removing the bumper. Thank you in advance.

I have deebot ozmo 950 anti drop sensor error. I checked the sensors and none of them are lit. from what I have seen, they are not connected in series. is it a software problem? could all 6 burn at once? Thanks

I am trying to find a motherboard online to purchase. Any ideas as to location? I own a Deebot 920 and am only able to find one for a 950 on ebay. Would this work?

Hello Ecovacs genius :). I have a defect Deebot R95. I want to ask you if is possible to have the motherboard schematic. I want to try to see if I can repair it. Thanks!

Hi! How to replace the main brush motor?? Can you make video please

I have a Deebot Ozmo 950 which is not moving smoothly. (The machine is 15 months old. When it moves across the floor it is jerky and just twists jerkily (NOT SMOOTH IN STRAIGHT LINE EVEN IF THERE ARE NO OBSTACLES). PLEASE CAN YOU HELP. WHERE ARE YOU LOCATED? I am in India.

Hi Sir - do you have any video for DEEBOT x1 omni? Am trying to replace the broken green holder for the leg but I can’t open the top. Slight difference and I tried your method but I accidentally disconnect the video cable. Now I not sure how to stick back.

Amara i have a 1 floor house can i disable the aiti drop sensors?

Hi friend. I have an "Ecovacs Deebot N8 Pro". It has 1.5 years of use. This week started doing an intense noise. Do you know how I can fix it? Thanks

Hi, do you have any video for disassembly of the empty station for T9+ ? if so, could you please share the link ? Cheers

Hello. May I know why my Deebot vacuum cleaner Map in the Ecovac App slowly starts tilting a few degrees to one side?

Hi can you please make a video on how to replace the main brush motor on the ecovac t8 aivi?

Is there a way to remove the round wheel under camera, for cleaning?

The head of the side brush where we plug the brush is broke. How to fix that?

Hi, I have problem with my Deebot M88 where the green side brush is not spinning....can pls share?

Do you have a video about how to open docking station? Thanks

The sensor doesn’t come out, what are you pressing before it comes out?

Hello…where can I buy the anti drop sensors for Deebot N8?

Hi! I have a deebot t9 and the front wheel is threadbare :( i'm trying to fix it by myself but i can't disassemble! How i can do it?

Hi. May i know why im getting “Clear main reservoir immediately” message after every ‘clean dustbin’ even though the main reservoir is not even half full?

hi, I have the t9 vibrating plate screws rusty and I would like to change them, could you tell me what type of screw and the size?

@ecovacstechnicalsupport5278 My Deebot T9+ keeps saying " off the floor " is there a know fix for this issue i cleaned 2 of the window sensors underneath but it still says it ? Please help

Can you completely remove the anti-drop sensors and the vacuum will continue to work? The “Please clean my anti drop sensors” error is driving me insane and the sensors are completely clean!!

can you show how to replace the laser distance sensor for deebot ozmo 950?

Hi, what about the reservoir sensor? my machine is stuck in mopping mode even with the reservoir removed completely as well as the mopping pad adapter.

I have disassembled the Ecovacs Ozmo 950 to replace the main brush motor. After I assembled it, it is only going backwards, then giving the error that front pumper is stuck. What could be the reason, which wire or connection is related?

Hey there, what could be wrong with our Deebot. It seems to work fine for a few minutes, then the suction stops but it keeps moving around like normal without suction, then the suction starts again. Very frustrating. Thank you!

I have deebot n8 can't find itself and restarts mapping Note that I clean it permanently, but the problem appears if I did not use it for a day or more and tried to start after that, it cannot find itself location can you help me ؟

I replaced the side brush, which works now, however, since reassembling I get an error every 5 minutes that says "please check the driving wheels" any idea what I might have done to cause this?

My deebot N10 is behaving weirdly, it's ending task in mid way and going back... It's jerking and confused goes randomly here and there

I would like to have a servicing for my Ecovacs N8 system, how I can contact you ?

Where is main brush motor located in this model

Why is my deebot saying new environment detected sometimes when i start the cleaning ?

why isn't it shown how to remove the wheels?

Apka service center kha pr hai address btaiye

Where to buy a replacement board?

Hi, I have a robot vacuum cleaner and it gives me a dust fall fault.

Thanks so much for this. Have been looking for exactly this for ages. I've just managed to follow this to replace a side brush motor (after reading the comments below about how to apply judicious violence with a screwdriver to get the top cover off).

The gentleman touches the circuit board without discharging himself electrostatically. However, this does not look professional if you do not adhere to ESD. Electrostatic discharges can cause damage in microelectronic components, because the energy of a static discharge in a semiconductor behaves like the energy of a lightning strike in a tree in relation to the size of the component. This becomes clear when you see ESD destruction in a chip under a microscope, which has created a 'crater' there.

ชาร์จไม่เข้าขึ้น 1% เปลี่ยนแบตแล้วขึ้น 1%เหมือนเดิม

Anyone in delhi who can fix this thing??

part 2: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Tbdk15E_iUw.html

how to get your service ?

You are dishonest for tagging other models than the one you are working on.

hi sir. please send me your whatsup number. I m interest in buying x1 Omni main control board. I m located in Cyprus Europe. I need your help please as I cannot find anywhere the main board