How to easily install Mac OS Monterey on a Windows 10 PC using Virtual Box

Подписаться 2,9 тыс.

Просмотров 39 тыс.

50% 1

UPDATE!!!!
It is now possible to alter your screen resolution and open in full screen! Simply open a command prompt as administrator and copy this line:
cd C:\Program Files\Oracle\VirtualBox
Once you have done this copy the command line below replacing "mac OS Big Sur" with the name of your virtual machine.
VBoxManage setextradata "macOS Big Sur" VBoxInternal2/EfiGraphicsResolution 1920x1080
I have entered 1920 x 1080 as the resolution however you can replace this with whatever the resolution of your monitor.
------------------
This guide will show you how to easily install Mac OS Monterey on a Windows 10 PC using Virtual Box install! This is not a Hackintosh! The Virtual Box 2022 Guide will take you through setting up a Virtual Machine to run mac OS Monterey right from within Windows.
If you need to know how to install Virtual Box please click this link to take you through to my simple guide:
The links mentioned within the video are these:
Installing Virtual Box:
• How to easily install ...
Virtual Box:
www.virtualbox.org/wiki/Downl...
ISO for Monterey
www.mediafire.com/file/4fcx0a...
Command Line Instructions:
mega.nz/file/BnBkFSoa#VuPJ58j...
00:00 Introduction
00:28 Minimum Requirements
01:12 Download the Monterey ISO
01:40 Setup a new virtual machine
03:32 Virtual machine settings
05:27 Download command line link and paste into Notepad
06:02 Open command prompt
06:13 Copy and Paste command lines
06:58 Start the virtual machine
07:37 Mac OS Install Menu
09:24 Mac OS setup
11:47 mac OS desktop
13:29 Change Virtual machine settings
13:51 Thanks for watching!

Хобби

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 129

@koszeggy Год назад

Useful video. Two remarks: - The quotes and hyphens are wrong in the first command. It took me a while to figure it out why I got error messages - When I started the created VM it was immediately shut down with an error: Failed to query SMC value from the host (VERR_INVALID_HANDLE). The solution was an additional command (I cannot link the source because YT removes my comment): VBoxManage setextradata "VM Name" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0

@mactwentyfourseven Год назад

Thankyou for the info. Sometimes these little things happen but I’m really glad you worked it out and are able to share that information. I’ll pin your comment so it can help others that may have the same problem. Thanks again n

@rayray0742 Год назад

Explain the first remark again ? If those are wrong how should it be typed ?

@koszeggy Год назад

@@rayray0742: The quotes are wrong only in the first command, use the simple typewriter quotes like below. And for the parameter just use --cpuidset (the first hyphen was incorrect)

@joseluisalvarez3325 Год назад

Yes and thank you!

@AndyRome 11 месяцев назад

Don't forget if you are boot looping, adjust the CPU cores to 1 for the install.

@ismailbenchekroun9869 Год назад

i checked i lot of videos they didn't help until i sow this one, thank you you have done good work

@yuryez 5 месяцев назад

Great manual! Worked well! Thanks a lot!

@apristinemadani 6 месяцев назад

Excellent Video. I am a Windows IT guy and I had to install MacOS because I know nothing about these computers. I was struggling to find a great (Clear) step by step video, and this Champ here has nailed it. Keep up the great work! Ps. I am the developer of: EZ Notes - Notes Votes Notes This is a very sophisticated Android Organizer, and we have a lot of awesome subscribers from UK. I hope you can help me share word about EZ Notes. The logo is a Blue Birdie, and the Developer name is: Alexander Madani Cheers everyone, Happy and very safe 2024 to you all.

@uwegenosdude Год назад

Thank you very much for your video. Does this also work on windows 11 with virtualbox 7? I tried it a couple of times but I always stuck at the end oft the first page when the virtual Mac tries to boot up.

@rondomasonstudios3135 Год назад

hi my thing is getting stuck right before you get to where you seprocedinglect your country of region and it says ''all kernel threads created for interface en0 have been scheduled at least once. proceeding'' do i just let it run?!?

@WindowsVista80 10 месяцев назад

hey whenever i go to the recovery screen and click install macos monterey it wont let me click continue? any fix

@MXG_X 9 месяцев назад

Hello, When I turn the MacOs on for the VBM its runs and pop up a Apple Mouse and other device that wanting me to turn on in order to run it any idea how to fix?

@Xx1oscar3xX Год назад

im running into issues with Icore Isolation, if is ON i’m unable to run MacOS any ideas how i can keep core Isolation turn in and still use virtualbox?

@shayghilay 6 месяцев назад

I followed the video instructions and got to the part of choosing the hard drive after formatting. However, for some reason, when I hover over it, the hard drive appears grayed out (as if it is not actually selected). When I press Continue, I get an error message saying that the disk is not large enough. The minimum size required to install the operating system is 35 GB.

@Vibepng 11 месяцев назад

the VM worked but i can change the amout of cup's used, and it says i can sign into apple id.

@AglassOfWater_55555 Год назад

When I install it once it's done showing apple logo it says this can you give me any suggestions to fix this please? Low battery threshold is not specified! Defaulting to 0x32

@shayghilay 6 месяцев назад

I was able to install the MAC OS system, but the screen looks small and it sometimes freezes, even though I have allocated 8GB of RAM. Does anyone have any ideas for increasing speed and setting up full screen?

@danjiushimo5875 Год назад

eventually after waiting for more than one hour or more, it completed and works.

@polandballanimations6120 Год назад

im strugling on the copy and paste link this i was turning on the cmd so many times cause i messed up

@twotimezant 9 месяцев назад

im stuck on vms command prompts how do i get out of this and why wont it work

@josephdaquila2479 5 месяцев назад

How can I check if have the extension pack installed with my VirtualBox download? Answer: CTRL + T shortcut or Files > Tools > Extension Pack Manager

@shayghilay 6 месяцев назад

Can running the commands in the file damage other machines running on Virtual Box? I have servers and Windows 10 machines. Has anyone tried this before?

@geraldinejns 6 месяцев назад

After about 1hour and 42 minutes it loaded. The only problem is it's extremely slow. Should I use more memory on my actual PC?

@turbojax07 7 месяцев назад

@mactwentyfourseven I see the pinned comment below, but why not edit the file with the commands on mega?

@xristoskar2 Год назад

the macos monterey is like 4, 5 ,9 ,10 hours left is that normal?

@droid.bot911 9 месяцев назад

Hi, after formatting the harddrive via disk utility, when i click on install macos monterey then click on continue it doesn't do anything. Can't go any further.

@Darkyzlol 8 месяцев назад

change your cpu to 1 cpu then u can change it to normal later

@richardkiely9131 Год назад

I am getting the following error when trying to start up VM. Failed to query SMC value from the host (VERR_INVALID_HANDLE)

@FullThrottle360 11 месяцев назад

hi, i am having the same issue. if you've found a solution let me know please.

@Herpipi 6 месяцев назад

good stuff

@pkosatvr 4 месяца назад

can it run on a intel pentium 5800 with 6gb ram?

@carloshenriquedeandrade2079 Год назад

i have a infinity load in apple screen, the time counter pass but, hes just reset and start again

@tanish_ganatra Год назад

@jaysgamingandbuildsc5533 2 месяца назад

is app store useable

@kegancherry939 11 месяцев назад

When i start my machine it tells me the wake failure part at 7:18 and does not move anymore I am running a Ryzen 7 3800 with SVM (Advanced virtualization) enabled

@oliverproctor5567 7 месяцев назад

did you get a fix?

@jaronmbrooks 6 месяцев назад

can't run on ryzen

@thedailybeat139 4 месяца назад

I got this error while starting it up: ailed to query SMC value from the host (VERR_INVALID_HANDLE). Result Code: E_FAIL (0X80004005) Component: ConsoleWrap Interface: IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}

@torchwolf2035 Год назад

I Keep getting Not in a hypervisor partition (HVP=0) (VERR_NEM_NOT_AVAILABLE). AMD-V is disabled in the BIOS (or by the host OS) (VERR_SVM_DISABLED). Result Code: E_FAIL (0X80004005) Component: ConsoleWrap

@gorila9142 Год назад

too

@yourjaildev Год назад

just enable bios in you cpu settings if you need a vid you can search how to enable AMD-V in bios on youtube

@VALENCIAiTEE Год назад

Mine keeps looping after the Mac OS Menu Install, doesn't go past about 5% of loading, it's been over 3hrs. Any tips? I have an AMD processor

@maskstorm1 Год назад

same problem it takes soooooooooooooooooooooooooooooooooooooooooooooooooooooo long to dowload this stupit macOS bull shit idk man

@another3997 11 месяцев назад

@@maskstorm1It's not a problem with MacOS itself. If it's too complicated for you, either don't use MacOS, or buy a real Mac. Running another OS on a virtual machine isn't usually difficult, you just require a little patience.

@SkillsAddaSabbir Год назад

installation cannot proceed because the installer is damaged. When Installing show the above msg. why?? Please provide a Solution.

@another3997 11 месяцев назад

Why don't you use your brain? The error message gives you a clue. Try downloading the installer again. Make sure all your downloads are complete. If it still doesn't work, why not do the really obvious thing, and use a search engine to find the answer on the web, rather than the comments section of RU-vid?

@scottwilliams2087 3 месяца назад

Im getting the following error when I try to start up the VM: Failed to query SMC value from the host (VERR_INVALID_HANDLE). Result Code: E_FAIL (0X80004005) Component: ConsoleWrap Interface: IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}

@ericzhang5313 3 месяца назад

Check out the first comment. I did it and it worked

@mertduzgun2691 Год назад

I'm getting a "system rebooted after panic" error, help

@francescospark9974 Год назад

same error

@dekkaceras9777 Год назад

same bro

@jozsefk9 11 месяцев назад

Same. Not only with Monterey but with BigSur and Ventura as well. On Linux though. But Windows 10nis working fine. Windows 11 is a disaster too.

@slimoftheshady Год назад

My virtual machine says "system rebooted after panic"? This happens just after the language selection.

@kennethvtice Год назад

I had the same issue and this should fix that: Shutdown VM and close Virtualbox. Open Cmd: Admin Navigate to: cd "C:\Program Files\Oracle\VirtualBox\" Insert the following (below) and hit Enter afterwards: VBoxManage setextradata "macOS" "VBoxInternal/TM/TSCMode" "RealTSCOffset" Reopen Virtualbox and VM and see if this corrects the issue.

@mertduzgun2691 Год назад

@@kennethvtice I'm getting a "system rebooted after panic" error, help

@mertduzgun2691 Год назад

I'm getting a "system rebooted after panic" error, help

@TheMediaLogoEditor928 Год назад

@@mertduzgun2691 the comment below is literally helping everyone.

@YodaComedy Год назад

@@kennethvtice thank you man!

@aftabseven2 Год назад

how to increase booting speed

@soyomonke6148 Год назад

When first booting it stops ant exitbs:start then it shows date and time but never boots to macos installer

@waekn Год назад

same im not sure how to get past it

@CapnHookz Год назад

It's a compatibility issue, run this command in cmd if you are on AMD machine. VBoxManage modifyvm "VM name" --cpu-profile "Intel Core i7-6700K"

@the.voloshin Год назад

@@CapnHookz yep, it works. thank you!

@luisdato1712 11 месяцев назад

@@CapnHookz I tried your method but it still was stucked, please help me by another way

@bamrungthongsai5057 7 месяцев назад

I followed your instructions and got stuck at : In Memory Panic Stackshot Succeeded ** bytes Traced 4279 (Uncompressed 9920) ** Attemping system restart... MACH Reboot Please help....

@theComput3rNerd 6 месяцев назад

Try use 1 processor instead of whatever you set, that worked for me

@TheRealMonkeyYtNew 2 месяца назад

if i install a virus will this affect mt irl pc

@TobyJWalter Месяц назад

as long as you are disconnected from the internet on ur main pc when u launch it, opening a virus on a vm should be fine, but research to double check first

@sachinlamichhane644 Год назад

virtual box gives guru meditation error

@mactwentyfourseven Год назад

Try reducing the number of CPU's in the settings to one and see if that helps.

@Internalfighter Год назад

Querying UUID failed (VERR_CFGM_VALUE_NOT_FOUND)

@bhveshh Год назад

Is it safe to use my apple ID there?

@Aydemirautomotives Год назад

Yes

@nix.0g Год назад

The ISO is corrupted and it won't let me install it.

@another3997 11 месяцев назад

How about downloading it again? Maybe find a different source for the iso? It's not rocket science.

@iTalEl0001 Год назад

Hi, i am stuck at 0 minutes remaining for over an hour. Kindly help me. Anyone? Please. Its urgent.

@VALENCIAiTEE Год назад

If you have an AMD CPU, redo the whole VM and type this command in addition to the commands he lists in the video. VBoxManage modifyvm "Mac OS Monterey" --cpu-profile "Intel Core i7-6700K"

@another3997 11 месяцев назад

If it was urgent, asking for help in the RU-vid comments section is the worst thing you can do. Try being proactive and search online for solutions. You also need to be more specific when asking for help... nobody else but you knows what computer hardware you have, what version of Windows, what other software you have running or how you're PC is setup etc.

@josephdaquila2479 5 месяцев назад

My base memory is getting into the red zone at about 1.6 GB.

@VALENCIAiTEE Год назад

For AMD processors, type in this code in the CMD prompt in addition to the command lines provided in this tutorial. VBoxManage modifyvm "Mac OS Monterey" --cpu-profile "Intel Core i7-6700K" My VM was stuck before this but this command line solved my issue.

@nindo73x Год назад

I've tried doing this but it didn't help me. Mine gets stuck on showing the date and then stays there. Any tips?

@jaro5822 11 месяцев назад

@@nindo73x I have the same problem. It get stucks on the date, have you found a fix for this?

@nindo73x 11 месяцев назад

@@jaro5822 I haven't, I just gave up on it to be honest.

@SoloSadIst Год назад

It does not work on my Ryzen system but it does on my intel system, why?

@AndyRome 11 месяцев назад

Because OSX was never written to run on AMD CPU, only Intel CPU since they had sold them with Intel CPU's for a minute.

@SoloSadIst 11 месяцев назад

@@AndyRome got it to work. I watched a video for amd and found a script

@justincheung3873 11 месяцев назад

@@SoloSadIst Could you share the link of the video that's for AMD device?

@SoloSadIst 11 месяцев назад

@@justincheung3873 cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage.exe modifyvm "mac OS Montery" --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff VBoxManage setextradata "mac OS Montery" VBoxInternal/Devices/efi/0/Config/DmiSystemProduct "iMac11,3" VBoxManage setextradata "mac OS Montery" VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "mac OS Montery" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Iloveapple" VBoxManage setextradata "mac OS Montery" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "mac OS Montery" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0 VBoxManage setextradata “mac OS Montery” VBoxInternal2/EfiGraphicsResolution 1920x1080 VBoxManage modifyvm "mac OS Montery" --cpu-profile "Intel Core i7-6700K" bcdedit /set hypervisorlaunchtype off

@SoloSadIst 11 месяцев назад

@@justincheung3873 i cant find back the video. add these codes that are missing from your CMD list. That last code line is the one that I was missing from all these videos

@axab2004 7 месяцев назад

Nothing works, even if you install one processor, at least two, at least three. It doesn’t work because the file they give you a link to is not working from the start. In short, it’s all a hoax, it’s hard to understand why

@moderm-e1s 14 дней назад

10 :00

@kmancurly4222 Год назад

mine is stuck on less then a minute remaining edit: its good now

@WonkoTheSane0147 Год назад

Stuck here aswell, what did you do ?

@itsmint6530 Год назад

How did you resolve the issue? Ive got the same thing.

@iTalEl0001 Год назад

Bro tell me. How did you fix, its been an hour.

@kmancurly4222 Год назад

@@iTalEl0001 wait that’s what i did

@mefsxmontage4206 Год назад

eyo help bro tell us we ll stuck there

@sammycreations6373 Год назад

Stuck on remaining 29 min

@digitalperfomer7 10 месяцев назад

Same happened to me, but I had a loop and when the installation restarts it's still at 29 minutes remaining.

@silly.catmemeoftheday Год назад

26 Mins just for an ISO?..

@AndyRome 11 месяцев назад

It took you 26mins to download the 15gig file?

@silly.catmemeoftheday 11 месяцев назад

I deleted the file, but It takes a long time because I think when you install an ISO, it has everything so It takes long.

@silly.catmemeoftheday 11 месяцев назад

While that, I can still install it.

@luisdato1712 11 месяцев назад

Haha it took me 5 hours to install that file:))

@silly.catmemeoftheday 11 месяцев назад

I installed the Macos file But i am having issues. it doesn’t work

@BloxP1ayer Год назад

I really need help mine just stops and doesn’t load anymore when I get to CEB.BST.FBSI +]

@wildjohn22 9 месяцев назад

i am getting an error on the mac os Monterey

@maged4087 5 месяцев назад

I faced this error, "help :( ": C:\Program Files\Oracle\VirtualBox>VBoxManage.exe modifyvm "Mac OS MOnterey" --cpuidset 00000001 000106e5 00100800 0098e3fd bfebfbff VBoxManage.exe: error: Could not find a registered machine named 'Mac OS MOnterey' VBoxManage.exe: error: Details: code VBOX_E_OBJECT_NOT_FOUND (0x80bb0001), component VirtualBoxWrap, interface IVirtualBox, callee IUnknown VBoxManage.exe: error: Context: "FindMachine(Bstr(a->argv[0]).raw(), machine.asOutParam())" at line 630 of file VBoxManageModifyVM.cpp

@DrCRAZYde 11 месяцев назад

1080p ? VBoxManage setextradata "MacOS" VBoxInternal2/EfiGraphicsResolution 1920x1080

@moderm-e1s 14 дней назад

@onlynudes1398 Год назад

I works damn

@danjiushimo5875 Год назад

just freezes and hung at less than a minute remaining, special thanks to @koszeggy for clearing up last code error instead of 1 set to 0, anyone else has same problems like mine? cheers