How to Emboss & Die Cut WITHOUT A MACHINE!!!

Подписаться 3,2 тыс.

Просмотров 60 тыс.

50% 1

How to Emboss & Die Cut WITHOUT A MACHINE!!! #m3glamsquad 👑
✂️📏I was asked to find a frugal way to do embossing folders and die cuts without a machine and without a bone folder. So that's what I did here! I hope these two ideas will help you and your friends! Now we don't have to drool over the folders or die cut sets or the stamp and die cut sets! We can use them ALL with these easy hacks!!! 🥄🍴
🤗❤Please tell me how these hacks worked for you! Or fill me in on your hacks!! 👀🧠
📢💅I apologize for my nails looking so nasty! Lol! I've been using my sprays and the first place that liquid goes is all around the edge of my nails! 👑
Let's do this guys!! WITHOUT A MACHINE!!!! LOL!
🎞📽👉If this live stream is too long, Watch on 2x the normal speed instead of normal! It'll sound a bit faster but you can still hear and understand what I'm saying and doing!👈📽🎞🎥
👑🙋‍♀️👩‍🎨 If you really enjoy my channel, and you would like to help me keep my crafty supplies stocked...
✴Please hit that👍 THUMBS UP👍 if you liked my project or anything about this video! 😁🤗👍 or thumbs down 👎 if you don't! Either way, just give me some thumbs please! 👍👎👍👋🖐👋🖐🙆‍♀��💜
✴❕👉If this is your first time here, please make sure you subscribe and RING the bell!! 👍🥳
⚠️Warning: I am UNCENSORED but I'll never bash or judge or criticize and I sure won't allow it done anywhere I can control it!!!!!
👑👉My favorite set in my craft studio that I use daily: amzn.to/2AZKe0R
👑👉 my favorite scissors: amzn.to/2Ow0T49
👑👉 My favorite brush set, Finnabair 3 brush set: amzn.to/2WaT0Tx
👑👉Spectrum noir glitter pen set: amzn.to/2VVqSDW
👑👉 Spectrum noir glitter ink: amzn.to/2Mtsi5y
👑👉My favorite book: amzn.to/35jQfDO
👑👉My paper crimper hack tool: amzn.to/2P2alg8
A few of my favorites:
Fabritac glue amzn.to/33UtXHb
Triple thick gloss glaze amzn.to/2MCz6hd
Tim holtz scissors amzn.to/2qCTbLV
Art Basics 3D gel amzn.to/2JdhYN8
Thank you for supporting my channel!
Some links might be affiliate links which just helps support this channel!
#crafts #artsandcrafts #papercrafts #handcrafts #diecuts #diecutwithoutamachine #emboss #embossingfolder #embossingmachine #mixedmediaqueen #mixedmedia #howto

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@joycevanschoor7951 3 года назад

I love it. I solved my problem with embossing folders by slightly spraying and then stepping on it. I weigh 150 and I have never broke one. I standstill for about 2mins. Walla

@Perivale 4 года назад

Lady, you get the prize for using the spoon on the embossing card! Totally worked better than a rolling pin. Thanks for sharing. 💕 I can afford one of those machines, but they look like they are heavy and space hoarders. Until I move to a bigger place, I'll use a spoon.

@M3glamsquad 4 года назад

You are so welcome! I am so glad it helped!!! 🥰

@doriskarloff964 7 месяцев назад

How brilliant are you!! This is my favourite kind of crafting - using what you have, without the space-hogging/expensive kit (until you know you need it 😉😉). Thanks for posting!💖

@M3glamsquad 6 месяцев назад

Thank you so much!

@francesstewart7407 7 месяцев назад

Oh my word. Thank you. I can buy some larger embossing folders to use now! No machine. Fabulous!

@M3glamsquad 6 месяцев назад

Glad it was helpful!

@JoannWard 4 года назад

I so needed to see the low tech approach! I don't have a machine and don't plan to get one. This is perfect! TY

@M3glamsquad 4 года назад

Glad it was helpful!

@jenettadoughtery 8 месяцев назад

1eeqq@@M3glamsquad

@OldHag73 4 года назад

I Love the embossing💕 but I didn't come up with the idea of the die cut without a machine. It wasn't my video I shared. I think metal on metal will make the dies super dull so I would probably put something else in-between like you used the foam and press with the knife on that other thing. A bone folder won't dull the dies in the same way. But there are butterknives in plastic that I think might work better then metal on metal. But love that I don't have to buy a ton of machines for everything 😊 now I "only" have to buy dies and embossing folders 😒 😜

@nataliekruger1641 3 года назад

Wow!!! That is amazing! Thank you so much for sharing this. I cannot wait to try it myself. I have wanted to emboss and die-cut for so long but do not have a machine. Yay!!! Now I do not need a machine! God bless you! 🥰🤩🌟

@M3glamsquad 3 года назад

You are so welcome! Thank you for watching!!! 🥰

@joy9748 4 года назад

The sec you placed that diecut down then rubbed you fingers on it, I immediately thought a rolling pin rolled over the die would work too.

@rethalockhart5452 4 года назад

I was thinking the same thing!!

@mydyisgod 3 года назад

Me too!!

@connectionoflivesandinterests 3 года назад

*That was my plan try a rolling pin. 🤗🤗🤗*

@maryanneswanlind7729 2 года назад

I tried my rolling pin, and it's a heavy marble one, but it didn't seem to work as well as the spoon or knife.

@dibright1445 7 месяцев назад

This is Great Info. Thanks for sharing. ❤

@M3glamsquad 6 месяцев назад

Thanks for watching!

@maryanneswanlind7729 2 года назад

I am so pleased to discover this site! I own an embossing machine, but, of course, it doesn't work with a larger die. Silly me, didn't check measurements when buying a die that I have wanted and the spoon and knife trick saved the day!!!!

@M3glamsquad 6 месяцев назад

Yay!!!

@barbarawright1179 3 года назад

Thank you so much for these tricks. I am so mezmerized by card making but don't want to invest a lot of money into it until I try it and make sure I want to really get into it. I lack the confidence but I'm going to try but go small and cheap at first.

@ProudmixedchildTheLionKing1 4 года назад

Hey, Mandy hope is all well with you and everyone God bless, and take care and may your crafts continue to glide, avoiding roadblocks that may attempt to make you slide, off course of course, you work magic with art not like Hocus pocus but you are for certain two words: determined and focused 😃❤️

@francesilnicky-vanameyden1975 2 года назад

I really appreciated this video with you, Mandy. Thank you!

@crystall.e8098 4 года назад

Girl my jaw just dropped amazing! Awesome thannnnnkk youuu 💜😍😂

@M3glamsquad 4 года назад

You're welcome 😊

@laurapugh6373 4 года назад

Oh my goodness! I watched your video this morning, as I cannot afford to get a machine atm. I bought a crafting magazine earlier in the week and it had a die cut stencil with it. I thought I'd give it a go..... Literally, 5-10mins later, using a rolling pin to start and finishing with a round handle knife, I had a beautiful seahorse! Thank you so much for sharing this amazing tip!

@M3glamsquad 4 года назад

yay! l'm so glad this helped you out! I Love to share frugal tips that I learn! 👍😍

@marshakopeika9671 8 месяцев назад

26:20 looks great❣️❣️

@sabrinaandbenji1390 4 года назад

I'm so glad that RU-vid gives suggestions on channels So i found yours! Thanks for share, I'm going g to give it a try

@eleanorrouxel122 4 года назад

Mandy you are awesome to share this with us.

@lauragordon8896 8 месяцев назад

Great ideas. Very useful information. Thanks.

@M3glamsquad 6 месяцев назад

Glad it was helpful!

@buffyvampire7814 3 года назад

If u have or buy a noodle making machine with crank.works wonders for die cuts

@jgirlbyootymua1097 4 года назад

Mandy so creative n very interesting video here! Love you so much!

@DragooneGaming 4 года назад

Great job Mandy keep it up

@reneemaurice9508 3 года назад

That was the best video yet for the ones I've watched so far thanks for sharing

@M3glamsquad 3 года назад

Wow, thanks!

@Jetlife777 4 года назад

Nice and informative video and thank you for all the helpful information

@deannabates1575 3 года назад

I’m thinking the handle of the paint brush to the left would make a good sub for the bone folder without the metal on metal sound.

@josephgroll6815 4 года назад

Hello Mandy 😍😍 That was fun

@sanjaynaswa554 2 года назад

Thanks for the hacks. Great

@cherylstout9685 7 месяцев назад

THANK YOUUUUUU

@janaugustyn7990 7 месяцев назад

My 9 inch die cut machine just broke. Can't wait to try this method, hoping to save me the cost of a new machine. Thanks!

@M3glamsquad 6 месяцев назад

I am so glad its helpful!!!

@corrineingerson8267 8 месяцев назад

Thanks for the video I’ve been trying to figure out how to do it on my old manual sizzix

@connectionoflivesandinterests 3 года назад

*I'm a new subbie. LOVE this vid, your personality & you have Beautiful hands. I LOVE & share about using what you have & love repurposing things. Thank you for helping those that don't have the extra money to spend. I look forward to seeing more of your videos. I hope you have your Paintings on your channel as well. I'm new to painting pours Kindda of painting. 🤗🤗🤗*

@M3glamsquad 3 года назад

Welcome!! and thank you for watching! You and I sound a lot alike! I have a feeling youll enjoy my channel! I'd love to chat with you in my live stream! I hope you find some helpful and inspirational things on my channel! again, thank you so much! 🥰

@marionwood3986 4 года назад

great tips thanks

@TodaysSpecialMinis 4 года назад

I love the alternative embossing idea, but I dunno about the alternative die cutting idea. It works, for sure, but seems like it takes a long time. I would only do a very simple die with the elbow grease method - I think if a person really wants to do die cuts, especially with thin metal does - basic machines are very affordable now (don't have to g et the latest greatest version). I would just save up and buy one if I planned to do a lot of die cutting in the future. The embossing idea, however - is gold. And yeah - those holes are in the dies on purpose - just for that. You use an awl or poke tool to remove the paper. I surprised you don't have a die cutter! That was the first thing that I bought when I discovered crafting 5 yrs ago. It started with me watching card making videos - never knew dies and die cutters existed before then - not for "at home" people anyway. So I made a list, saved up my moolah and went to Michael's (first time I ever even went in one!) and near bout FELL OUT I was so amazed at everything they had. I was instantly hooked. But I got 3 Tim Holtz Bigz Dies, a Big Shot, embossing powders, inka ink, etc. The die cutter was the most important thing though LOL. Because I didn't know anything but what I saw from the videos. I also got some embossing folders. Thanks for sharing these "think outside the craftroom" hacks.

@AnneAndersonFoxiepaws 8 месяцев назад

Thank you!

@M3glamsquad 6 месяцев назад

You bet!

@reneev1010 4 года назад

Thank you SO MUCH

@M3glamsquad 4 года назад

You're welcome!

@rethalockhart5452 4 года назад

You can buy bone folders at dollar tree now!!!

@shirleymalar304 3 года назад

Are you sure it's Dollar Tree? I just looked on their web site and bone folders aren't listed as a product they sell even as a warehouse order.

@aifg8064 4 года назад

Likes Likes Your Way MAddddLove

@RuiManuelFernandes 3 года назад

I love the idea and i want to make it for a wedding invitation even if i have to purchase a die cut machine i'm open to it. But, my biggest concern is that i created a shape that i want it both printed and embossed and there ar NO STENCILS for it. Where and how can i bring it to life and make possible the embossing of this specific image

@M3glamsquad 3 года назад

Well... depending on how intricate the image is, you could print it out or take to Staples or Office Max and have it printed. Then comes the hard part... use a mouse pad and an embossing ball tool, and outline the back of the image to make the front have definition. Depending on how many and the shape, this will take a LOT of time! I'm not sure how else to have your own image turned into an embossing folder. I hope that helps! I wish I had a better answer for you! 🥰

@DD-hp9vo 8 месяцев назад

Heavy rolling pin?

@marianamill5839 7 месяцев назад

I saw someone on FB that used thin foil for embossing & the heart were beautiful but she said you need the machine. Any thoughts how it can be done without a machine.

@M3glamsquad 6 месяцев назад

same way, I would just be more gentle and maybe use a piece of paper folded around it.

@lzrd8460 7 месяцев назад

Could you use a rubber brayer or rolling pin to emboss? Just wondering.

@M3glamsquad 6 месяцев назад

Probably not the rubber brayer but if you have a hard roller, it might work, the knife and spoon get the sharp edges better in my opinion. But give it a try!

@lzrd8460 7 месяцев назад

For die cutting, why not put a piece of parchment paper or wax paper on top then rub the knife over it, hopefully without the metal hitting the metal?

@M3glamsquad 6 месяцев назад

try it out and see. Its fun to try new things. 🩷