How to fill gaps in old wood floor

Подписаться 6 тыс.

Просмотров 44 тыс.

50% 1

in this video I'll show you how to filling the hardwood floor and stain old floors
.👋👋🤩👷‍♂️🤩👋👋.
======================================
these procedures were used in this project is.
first procedure to do is to punch the nails. and first procedure mashin hummel disc 24. then proceed with number 50. and finally use the disc 100. then also with the corners spread the Edger disc 24 then 50 and at the end use the Festool disc 80 for the corners. and the last procedure uses hand sand with paper -120 or paper -150.
and the product to fill the gaps on the wooden floor is jenkins joint filler
_____________________________________________
👋👷‍♂️😊..thank you for choosing my video, see you soon for new videos ...😊
If you have any doubts on how to carry out these procedures, please do. write me on messages thanks
======================================
grazie di aver scelto il mio video ci si vede a breve per novi video 👋👷‍♂️😊
se avete qualche dubbio come fare realizare queste procedure da fare. scrivetemi su gli messaggi grazie
✌️👷‍♂️ follow my channel. 👋👷‍♂️
#basicwoodworking #woodwork #woodworkingprojects #wood #woodworkinguk #flooring

Опубликовано:

9 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 132

@eldonhoward7925 6 часов назад

The floors look great!

@chatra_fingerstyle 2 года назад

Thanks for sharing video

@leumnanthavong 2 года назад

Good content Pease keep on thanks for sharing video

@t.1erme747 2 года назад

Perfect 👍👍👍

@loxhaerme8730 Год назад

Well done good job 👍

@kcjean9883 10 месяцев назад

Gorgeous floors and craftsmanship. Im fixing to refinish the floors in a few weeks so I'm trying to learn as many tips and tricks as i can before then to make the process as smooth as possible 🥰

@Ermes12FloorSander 10 месяцев назад

yes, then realize that to start you need for the orbital eger you need disk 36 - for the first process for the second process disk 50. and for the final process disk 80 with Festool. this is valid for the corner this only for eger with disc 36 and 50 instead disc 80 is used for the final hand on the corners with Festool. instead for the hummel you will need a 36 belt for the first coat then a 50 belt for the second coat. and for the last procedure belt 100 . 👷‍♂️

@Ermes12FloorSander 10 месяцев назад

if, however, your floor is made of pine you will have to do the first processing not with disc 36 but with disc 24 with eger. even with hummel 24 tape only for the first procedure.

@user-qw6eq3dx4w 9 месяцев назад

Bene fatto complimenti bell video 👍👍👍

@jamesknight2416 11 месяцев назад

Any one else notice to door open by itself after he shut it???

@mona-lisa7484 5 месяцев назад

The windows are opened throughout the house and the air is blowing

@c4r5on88 2 месяца назад

I have a door that does this all the time and it pees me off

@TheParaparGroup 6 месяцев назад

very good!! Thank you!

@Ermes12FloorSander 5 месяцев назад

Thank you too!

@lutomyrto5342 Год назад

Wow looks amazing keep it up bro 💯💥

@paulmryglod4802 6 месяцев назад

Nicely done. Good editing

@Ermes12FloorSander 6 месяцев назад

Thanks!

@amandar5827 11 месяцев назад

Looks awesome!!! Do you sand again after the filler dries? And does it take stain well? I always envision these lighter spots where the filler goes!

@Ermes12FloorSander 11 месяцев назад

the filler is done in two steps the first hand is done after you do the sanding with belt 36 if the floor is oak and instead if it is pine with belt 24 then the second is done before you do the final hand with belt 100

@amandar5827 11 месяцев назад

@@Ermes12FloorSander Thank you! They are old growth oak, very tight grains. So I'm going to do 2 sets of fillers? And at any point do I stain the filler?

@Ermes12FloorSander 11 месяцев назад

but you have to pour the juice slowly until it remains soft

@A5cension Год назад

If I didn't live in a four season climate I would have done this to my floors.

@Ermes12FloorSander Год назад

thanks for your comment. 👍😁

@MayhemMcLickinz-bq5zr Год назад

I want too do my Future Kitchen Floor in pennies after all it is .99 a sq.Foot and Germs and Bacteria do not survive on Copper🥳

@jakejacobson2999 4 месяца назад

@@MayhemMcLickinz-bq5zrterrible idea lol unless you don’t plan on selling your house

@phillipdukes8319 Месяц назад

This is cool! When sealing the gaps, is there any concern for expansion/contraction of the wood?

@Ermes12FloorSander Месяц назад

Yes when doing soft wood it will fall and come out eventually while hard woods last longer.

@michaelvachon1334 3 месяца назад

What is the fluid you used to mix with the sawdust? Looking for something that would be available in the US that is similar to the Jenkins wood filler you noted. Is this just a liquid epoxy?

@Ermes12FloorSander 3 месяца назад

Hi .there is Bona mix and fill also Lecol wood filler wichbis similar to jenkins . I am not sure if you can get them in America but i should think so . You can also use pva wood glue to mix with saw dust for small gaps but its not very good for wide ones . Thank you for coment and viewing my channel.

@MayhemMcLickinz-bq5zr Год назад

Is that the dirty sawdust you got from the floor sander??

@Ermes12FloorSander Год назад

yes

@jessicabereznyckyj1428 14 дней назад

What did you use to get the gloss finish?

@Ermes12FloorSander 14 дней назад

It was a Bonna satin varnish .

@thegravytrain1129 14 часов назад

What product are you using?

@Ermes12FloorSander 2 часа назад

The name of the product is morrells black varnish .

@emmamcdonagh7189 Год назад

looks amazing 🙂how long after filling and staining do you have to wait before applying the laquer? thank you

@Ermes12FloorSander Год назад

after you put file, wait 20 minutes before sending it again with belt 100, after you have done this, paint the floor with stain and wait until it dries well. then apply the first coat of varnish duet and sand the floor with sandpaper 120 - 150 if it is pine or on the oak floor use bather orbital sander with disc 120 and finally give it 2 more coats of varnish

@Ermes12FloorSander Год назад

thanks for your comment

@emmamcdonagh7189 Год назад

Thanks so much! That’s really helpful :)

@Ermes12FloorSander Год назад

I'm glad I helped 👷‍♂️

@colemeeker908 Год назад

Will the Jenkins wood filler work for large chunks or divots in the floor?

@Ermes12FloorSander Год назад

yes it works but first you have to put something on the spaces, for example tape on the spaces. stand a little bit close to the floor and then do the filer on the floor. wait for the filer to dry. sand the floor. and then do the second coat. before performing the last finishing process

@Ermes12FloorSander Год назад

in the first coat the filer should be not very liquid. but a little creamy so it sticks better on the sides of the floor it doesn't fall down. and on the second coat, more liquid from the first coat than in the first coat, so it will be better. hope i helped.👍👷‍♂️

@Ermes12FloorSander Год назад

and thanks for your comment

@SpiritTracker7 4 месяца назад

Is this a good idea for every zone in the US? I mean where temperatures that fluctuate from 10 degrees in the winter to 95 degrees in the summer, with the contracting and expanding isn't that why we see failed gap filler cracking up which then becomes impossible to refinish again without digging that all out?

@Ermes12FloorSander 4 месяца назад

hi ,in areas where the weather fluctuate a lot its probably a good idea not to fill as it will eventualy crack and fall ..

@Ermes12FloorSander 4 месяца назад

when I proceed to fill the empty spaces in the floor I always explain that it is something that does not last over time, the filler falls off over time and because of the movement of the wooden boards that move or widen over time

@DrPheigth 11 месяцев назад

I've not been able to find the liquid you poured into the sawdust. I'm restoring a 1905 rock-faced block home, which was oak floors. I've done the floor sander from 24grit to 100grit. I am to the point of needing to purchase the filler, but can't seem to locate what people are actually using. Could you give me the same of what you're using? I know you have "Jenkins" listed, but when I Google that, it doesn't NOT come up with what you're using.

@Ermes12FloorSander 11 месяцев назад

you should look for it like this 👇 Jenkins Joint Filler Cellulose Based 1L

@Ermes12FloorSander 11 месяцев назад

you can search on google for the liquid you need to make the filer on your floor

@DrPheigth 11 месяцев назад

@@Ermes12FloorSander I've been looking, I found Minwax Sanding Sealer .... and I'm hoping it's close enough.

@Ermes12FloorSander 11 месяцев назад

I think so and best wishes for your project 👍👍

@LuisMartinez-js5fb 9 месяцев назад

@@DrPheigthdid the MinWax sanding sealer work mixed with the wood dust ? I’m planning to use it since I didn’t find the Jenkins product . Please let me know

@sighck Месяц назад

Is there a similar method and product for outdoor decks?

@Ermes12FloorSander Месяц назад

You can do the same thing for decking go through the same proces bit no need for filler and you use decking oil as a finish .

@mattchapman8477 7 месяцев назад

Do you sand again after you put the wood filler down, then stain?

@Ermes12FloorSander 7 месяцев назад

yes after the filler you have to send the floor again

@mattchapman8477 7 месяцев назад

@@Ermes12FloorSander Thank you. Do dark stains penetrate the wood filler? Have you ever mixed stain into the wood filller?

@Ermes12FloorSander 7 месяцев назад

@@mattchapman8477 you let the filler dry for a few hours then sand it flat with the floor then you apply the stain .the stain take to filler aswell when you stain the floor .

@sacajuncaj-berishaj547 Год назад

What is name or brand of wood glue? Thanks

@Ermes12FloorSander Год назад

the product name is, jenkins joint filler

@jamesknight2416 6 месяцев назад

What do I mix with the saw dust to make the mixture to fill the floor gaps??

@Ermes12FloorSander 6 месяцев назад

the liquid filler that I use is called Jenkins joint filler.

@jamesknight2416 6 месяцев назад

Is there a equivalent in the United States

@Ermes12FloorSander 6 месяцев назад

I don't know if the product exists there in United States. but you would want to use a product similar to what you find in your country. (I'm in Europe)

@gianlucatoscano1607 4 месяца назад

Hi there, Just a question, can I use a hand sander for a project similar to this one? If yes, what grind size you suggest to use at the beginning till the end? I guess the best os to start with the tough one and then gradually move to the finest one isn't it? Thanks 😊

@Ermes12FloorSander 4 месяца назад

Hi .yes you could use a hand sander .(orbital or belt ) you shuld start with a 36 grid paper then 50 then a final 100 .il will not be as easy as if you use the havy machine sander but definitively can be done .

@gianlucatoscano1607 4 месяца назад

Thanks for the reply mate, another quick question. For how long does the saw dust mixed with the joint filler needs to dry? After the drying process did you sand it again? If yes what grit you suggest. I guess after all of that you stain the floor and than apply a primer maybe? After the primer you can apply the varnish isn't it? Thanks again for your replies 😊

@Ermes12FloorSander 4 месяца назад

and dry the file for 30 minutes. maybe the filer proceeded with 100 reps. base repeats 100 if you are not pine wood. Make a 150 disc bather. And if the floor is pine, there is no need for a bather. after we make these special arrangements. and after the stain dries, we apply varnish. thanks for the comment.👷‍♂️

@Ermes12FloorSander 4 месяца назад

even after we have given the first coat of varnish after it has dried well. if the floor is pine, we give it a hand sand with paper 120. if it is an oak floor, we must give it 2 hands of varnish after making a buffer disc 150. do not sand the floor, it will take 3 coats of varnish.

@Ermes12FloorSander 4 месяца назад

Sei italiano?

@267BISMARK Год назад

Do you have to sand the floor again thanks?

@Ermes12FloorSander Год назад

Hi ,yes you have to sand after the filler then laquer it

@267BISMARK Год назад

@@Ermes12FloorSander thank you

@08manuelelias08 Год назад

could not see the name of the glue

@Ermes12FloorSander Год назад

the product name is, jenkins joint filler

@jakejacobson2999 4 месяца назад

What product did you use?

@Ermes12FloorSander 4 месяца назад

il nome del prodotto si chiama Jenkins joint filler

@mitchellmayerchak163 5 месяцев назад

Can you still stain the floor after doing this

@Ermes12FloorSander 5 месяцев назад

after we fill the spaces on the floor with filler we have to do again sanding the floor and after you can stain

@BookieLukie21 Год назад

You left the edges unsanded?

@Ermes12FloorSander Год назад

I have done the edges ,you can see on my other videos how is done ,this video was to show the filling process and the finish .

@Ermes12FloorSander Год назад

in the corners and 2 procedures were done with Edger disc 36 and 50 and last process was done with Festool disc 80. thanks for your comment.👷‍♂️

@MayhemMcLickinz-bq5zr Год назад

Floors are suppose too expand and contract?? Is this too save money on polyurethane??

@Ermes12FloorSander Год назад

this filler thing i always recommend its a short lived thing not long lived and the filler will fall off. people who choose it can't stand open spaces even if the duration is short

@MayhemMcLickinz-bq5zr Год назад

But doing that your going too ruin alot of floors

@Ermes12FloorSander Год назад

my job is floor seder.

@Ermes12FloorSander Год назад

I don't know what your job is but as I wish you first, I wish you the best of luck in your job.✌️😁👷‍♂️ and I hope not to ruin them but to give them their splendor again.😁✌️👋👷‍♂️

@MayhemMcLickinz-bq5zr Год назад

Try fractal burning a hardwood floor

@rencross7399 Месяц назад

Paranormal activity @ 3:12 👻

@MayhemMcLickinz-bq5zr Год назад

Show me those same floors after 1 month

@Ermes12FloorSander Год назад

what tattiche are you talking about.?

@robertedwardleesmyth7669 4 месяца назад

Would help to know the products you are using

@robertedwardleesmyth7669 4 месяца назад

Sorry found it in your comments

@Ermes12FloorSander 4 месяца назад

the color applied is called light oak stain. and instead the product to fill the spaces on the floor is called Jenkins joint filler

@Ermes12FloorSander 4 месяца назад

thanks for your comment .👷‍♂️

@nickorango 7 месяцев назад

Can this be done in four season house?

@Ermes12FloorSander 7 месяцев назад

Yes no problem you can do it

@nickorango 7 месяцев назад

@@Ermes12FloorSander Great. I will try it.

@Ermes12FloorSander 7 месяцев назад

👷‍♂️👍

@TheFatherTheSonHolySpirit 2 месяца назад

Whats was the dark color at the end you painted the whole floor

@Ermes12FloorSander 2 месяца назад

the name of the color is called jacobean dark oak stain

@Ermes12FloorSander 2 месяца назад

But it must be mixed with white spirit. for example a glass of akua filled with jacobean dark oak stain and two glasses of water filled exactly as done with white spirit stain. and you will have that color. 👍👷‍♂️

@TheFatherTheSonHolySpirit 2 месяца назад

Thank you

@TheFatherTheSonHolySpirit 2 месяца назад

@@Ermes12FloorSander does the white spirit cause the color to be a little later than jacobean oak brown alone

@TheFatherTheSonHolySpirit 2 месяца назад

What is white spirit and akua are these paint thinner ?

@MayhemMcLickinz-bq5zr Год назад

How much are homeowners paying for this??

@MayhemMcLickinz-bq5zr Год назад

Now I'm living in Central PA

@Ermes12FloorSander Год назад

I don't know I'm an employee I don't know the costs sorry