How To: Fix A Fan’s Tilt Mechanism (Viewer Requested Video) 

Thank you much for this, I was taking my fan apart to clean it properly and my incorrectly inserted spring popped out before I could see where it belonged. This video is super helpful.

Thanks for the video, it's exactly what I needed

Thanks a ton bro !! This video really helped a lot! Only video in entire RU-vid that shows how to fix tilt mechanism. You are awesome..

Thank you very much for this video! I just bought a Hurricane fan and the tilt would not hold. I took it apart per your video and was able to bend the strong spring and now the tilt holds. Would not have tried adjusting the spring without your video. Thanks again.

FANTASTIC BRO I WAS SO AMAZED THAT MY PROBLEM GOT SOLVED EASILY THROUGH YOUR VIDEO.

Thank you Frazer! I just bought a €30 fan and after assembling the item found the head wasn't tilting up and down. I followed your tutorial which was very clear, precise, informative and gets to the point fast so I decided to give it a go. It works! I was able to fix the spring but saw another issue with the fan, there was a crack next to where the spring sits into so I think the plastic is too weak to hold the spring. Although fan is tilting up and down now, to be on the safe side and peace of mind, I think I'll return the fan to the shop and get a replacement because of the internal crack. Thank you for your fantastic tutorial!

This is very helpful! A simple solution to a common problem. Only provided here! Thank you!

Thank you for making this video, just got a new fan after breaking my old one. Currently a heat wave so I was worried I’d have to return it but your video was perfect for the issue. Great explanation and demonstration and I don’t even have the same brand of fan!

Thank you! This is the exact problem I am having with our new fan. Massive help , thank you

A+++ Thanks for this very helpful video. Our fan's tilt mechanism was broken and your instructions were on the money. 10 minutes and the fan is working like new. Note: the 1/4" x 1" curved metal piece with the series of holes had also broken from its mooring and a small piece of the plastic holding it had broken off. I cleaned off all the lubricant, dabbed a little Gorilla cement in the unbroken end of the plastic slot, and the metal doohickey slid right in and stayed in place.

Thank you so muchhh!! I just fixed two of our fans bc of you. ❤❤❤

Thank you for the video.

Thank you so much I actually took my fan apart to paint it and when I put it back together it looked so sad because I had not put that spring in correctly so the head only faced downward. So thank you thank you

Thank you very much!

Thank you!

THANK you!

Thank you very helpful. If i call somebody to fix, they'll charge me $50..but you teach for free 😊

You put the spring in the same position it was before.Just wondering how it solved the issue.I tried many times but to no avail.

Thanks so much for the video, very helpful…… There is a little string and and tiny rod that came off from that black hole, I don’t know what to do with them please and how to fix them back, without them, the fan still works and rotate but I noticed I can’t manually control the direction the fan is facing anymore by pulling the head, I have to lift the fan to change direction now… I will appreciate if you can tell where to put those string thing pls

Wow.. thank you!!!! That was so easy..

Thanks mate. I just bought a new standing fan and the tilting mechanism doesn't lock where I want it to be. I will repair it later based on your video

Have the same crazy problem with my fan will give it a go tomorrow. Didn't think I'd find anything about this problem buy hey, what do you know... Tks man!

Thanks

Tq.. Super helpful

Hey Frazer dude! I’m having a problem with my ceiling fan and i’m hoping you can help me out. It’s a wall fan, similar to yours just with a wall mount and two strings attached at the bottom of it. One for fan speed and the other for rotation. I can only stop my fan spinning only if it’s positioned frontwards or rightwards but not leftwards. Any chance you know how to solve this issue? Thanks a lot x

Thanks this helped a lot Finally i can sleep hahah

Unfortunately I did what you showed and the fan still kept going upwards so I just took the spring out and left it out and it is working as intended

What size is the screw that has the nut? Can u just purchase a replacement spring and nut and screw?

I had to extra tighten my fan so it stays. A frgging brand new fan with a problem😭

Thanks for this. I have a similar fan but is a tall pedestal rather than a desk one. It has a pin that pops into various places on a line of shallow holes to support the tilt. The pin had fallen out and I put it back in. I couldn't fit the spring back in and align with the screw so I actually took the spring out and the tilt is now working. I wonder what the spring was doing. I presume just extra support.

What is the fault if wall fan is isolating, but it tilts loss on oneside, if again adjusted it isolates, what's the problem

Super

You might want to make a note about EYE PROTECTION when dealing with a spring that is not fully mounted. That thing can do some serious and permanent damage.

It doesnt wrkd for me

Same problem with my wall fan😂😂😂😂😂😂😂

I literally just threw my fan into a ditch when the tilt thingy broke, lol. Then I put it back in the box and got my free Amazon return. F*ck fixing cheap crap.

The fan has viagra

mine are different model/type , when i open it up , theres 2 ball bearing and a spring came off , now i can't do anything about it :(

I CANT REASSEMBLE IT, THE HOLE WONT ALIGN WITH THE SCREW IM SO DEAD MY DADS WILL BE HOME TOMORROW 😭😭😭

I came here looking for literally the opposite problem on a standing fan. Once it starts oscillating, the head drops down.