No video :(

How to fix B200 error Canon MX870 printer

Подписаться 4 тыс.

Просмотров 39 тыс.

50% 1

hopefully this will help you if you get this error. this B200 error can be caused by a few issues. from what I have been able to find, it's can be:
old dried up printer cartridges
cheap non OEM cartridges (not always)
empty printer cartridges
printer head system clogged
metal contacts on printer head degraded
automatic head cleaning components (sponge and rubber wiper) clogged with old ink.
the process in the video may or may not resolve your problem, but it did fix mine.
I cleaned my printer heads, replaced all the ink cartridges (I use cheap cartridges from eBay but they are fine), and did this process to get my printer back online. once it booted up I could then run the head cleaning process in the printer settings.
canon MX700 printer fix for B200 error.
cleaning printer head video:
• How to Unblock and Cle...

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@stevenfraser1842 3 года назад

This worked - its important that you lower the lid as the heads are moving backwards

@AndersonPN 11 месяцев назад

yes!

@carriebing 6 месяцев назад

This worked for me! I replaced the ink cartridges then followed the steps in the video (powered off, opened, moved cartridge rack over, powered back on, closed lids as cartridge rack started moving)

@outie555two 6 месяцев назад

Nice job buddy

@wiredupjax Год назад

Excellent - the last option worked - powered off, opened, moved cartridge rack over, powered back on. On the way to cartridge park, shut top and good! Thank you!

@outie555two Год назад

Fantastic!

@lindabradford9591 Год назад

Mine cleared too but now it is back.

@waffleridersmoto4191 2 года назад

Holy smokes after watching five different videos, yours was spot on, thank you.

@Aisomar Год назад

Replacing two ink tanks and closing the lid when the tank was moving did the trick. thank you so much!

@outie555two Год назад

You're welcome!

@HarryJacobs-de3ww Год назад

You beauty - never had an issue with this printer until today and fixed in a flash - thanks.

@outie555two Год назад

Great to hear!

@brendakurtz4553 2 года назад

What?!?! I was ready to throw this printer in the trash. (I mean... it's old, but it's been a little workhorse and I have a ton of ink cartridges, so it seemed such a waste.) The Canon site was zero help, and I thought I had tried everything to resolve. Cartridges were not empty, but printer head kept stalling mid-warmup-sequence. SO GLAD I found your video. Husband was 🙄when I closed the lid as the printer head shifted back to the right, per your final tip. We were both 😲😲 when it actually WORKED! Thank you!! 🙏

@stvcone Год назад

Worked! Much appreciated outie. Took only 3 minutes!

@dorabyrd2199 3 года назад

Thank You so much! Really helpful! Also will get error if printer does not recognize the cartridge . I use kingjet way cheaper that OE and printer recognizes cartridges. Thanks again!

@chrislundquist6621 2 года назад

I did thr last part and so far it fixed my issue. thank you so much for posting this

@tukidate 20 дней назад

Thanks a lot! My MX870 return!

@gabrieljacobs9151 2 года назад

This worked on my MX882 but then I told it to copy and the display went black... Now it won't power on at all. Thank you for the trick.

@jackie7510 Год назад

So far the 2nd step worked no more b200 error a timing issue thx

@outie555two 6 месяцев назад

Nice, hopefully it stays that way. Otherwise you will need to buy a new printer head

@dungtruong6214 3 года назад

Thank you! It totally worked on my first try!

@truthmatters8407 Год назад

Thank you sir! Your information was spot on!

@outie555two 6 месяцев назад

Glad to have helped

@loubino18 2 года назад

Yes, this worked!! Genius - THANK YOU!!

@jimdittler7624 Год назад

Thank you so much! It worked!!

@else2244 2 месяца назад

Thank youuuuu!

@outie555two 2 месяца назад

👍🏽

@darlenemilton1716 3 года назад

Woohoo! This worked! Thank you!

@julietaylor1663 7 месяцев назад

It worked! Thanks very much.

@outie555two 7 месяцев назад

Glad it helped

@titanio1955 4 месяца назад

Excellent 😊

@outie555two 4 месяца назад

Thank you! Cheers!

@CaliforniaDreams-eb8sx 8 месяцев назад

This worked for me.

@outie555two 7 месяцев назад

Terrific

@user-vk9js5ze6e 7 месяцев назад

can you post a link for the video on how to clean the printer head? thank you

@outie555two 7 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lWFx5IevcF8.htmlsi=7i89R8MHgLNuZUE6 I've also just put the link in the video description

@hynnesherselman4240 Год назад

Awesome.3 part worked

@outie555two Год назад

Glad it helped

@hiromiheider 9 месяцев назад

Where is the video to remove the ink holder to clean it?

@outie555two 9 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lWFx5IevcF8.htmlsi=85t7T1arpKA3Ey64

@drumdude40 Год назад

The printer heads won't move at all. Not on their own and I can't move them...any advice?

@outie555two 6 месяцев назад

Not encountered that with the printer on. Is your one off or on?

@EdwinC 3 года назад

I still get the B200 error without the print head installed so I think the B200 also relates to some other problem.

@M_a_r_c_e_l_e_r Год назад

Thank You!

@outie555two 6 месяцев назад

You're Welcome

@TheMackcasper 6 месяцев назад

Mine removes the error after lowering the lid but time to print and it pops up again b200

@outie555two 6 месяцев назад

Give it a few goes and it might clear. The printer heads are getting old and this error is the early signs that the printer head will soon fail at some stage. You may need to buy a new printer head for it if it doesn't clear.

@levialston9046 2 года назад

I've tried everything including new head but still have the b200 error

@rudyhertayono1233 9 месяцев назад

My MX850 got B200, 1sec after Canon logo turning on. No chance to get the print head moving to the right and to the left. To get QY6-0075 is also difficult as very limited shops sell online as I'm a bit worried about buying a new or refurbished print head that will solve B200 error. I did wash, soak, rinse the print head and clean multiple times with no luck. Don't know why. Why does it take 1sec only after the Canon logo disappears the printer got a b200 error. Any clue guys? Thanks.

@outie555two 8 месяцев назад

Probably the printer head had officially died. I've tried buying two refurbished ones off eBay and they have been rubbish the first was listed as new, but the ribbon cable had a rip in it. The seller keeps promising to send me a new one for over a year now. Bought a second one from another seller. It came in the same packaging as the first one. It was dead on arrival. You might be able to buy one that works that is refurbished but it would seem it's hit and miss. Perhaps try looking for a second hand MX870 to get the head from if it's not working.

@rudyhertayono1233 7 месяцев назад

@@outie555two Thanks for your reply. I bought one from eBay that came from China and it is totally rubbish as not I have got another error 1405 and 1660 which I believe fry my logic board printer. Try to return the print head to the seller but it seems the seller did hit and run as they cannot give me a return label. The question is if I buy the expensive printer head/refurbished one, would it be bring back my printer back on again? Quite rare to find reputable sellers in eBay now.

@adriennebeauchamp2524 Год назад

It worked thank you

@barbaram4160 Год назад

This worked at getting the error message cleared and allowed me time to clean the printers and paper feeds but when I actually tried to print something, the error came back. Would like to know if that happened to anyone else.

@outie555two Год назад

Just repeat the process until it turns on without the error and prints. That's what I do

@howardje1058 2 года назад

I can't get the printer heads to move with the printer turned off and unplugged. It's as if they are locked in place. I was able to move them the first time I tried, but now they're stuck 😞.

@outie555two 2 года назад

Do they move when you turn it on? If they do, then switch the printer off after they have started to move, then slide them to the middle of the rail and power it back on.

@BiglyDownUnder 7 месяцев назад

Same here. It's locked to the right no matter how much I try to jiggle it and pull it. It doesn't move when powering on or off either

@howardje1058 7 месяцев назад

I ended up getting a new AiO printer, a Canon G7000 series, with ink that comes in bottles. Good luck!

@angeladouglas8200 2 года назад

Why are you speaking so softly! I can barely hear you.

@outie555two 2 года назад

Thanks for letting me know, I'll speak louder next time you watch the video.

@stevenfraser1842 3 года назад

Where is your other video?

@outie555two 3 года назад

Sorry, I think it's on my other channel, also called outie555

@radhakrishnanjambukeswaran3822 2 года назад

@@outie555two I don't find that. Link please

@ezragurl7979 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lWFx5IevcF8.html&ab_channel=outie555

@georgelowe8583 2 года назад

I would like your video if I could hear you!

@outie555two 2 года назад

RU-vid should have generated closed captions by now, so please enable them. Hopefully that can assist with your hearing difficiency.

@michaeleisenhour8203 Год назад

Just like waffles I too watched many videos, yours worked.. Now if you could help me get back into my Yahoo account you would be my hero. If you have any videos on that subject let me know. You may have a new subscriber.