How To Fix Turbo Wastegate Rattle PERMANENTLY! N20, N54, N63...

Подписаться 6 тыс.

Просмотров 16 тыс.

50% 1

If your turbo is rattling or you're getting boost related codes, this is the fix for you. Normally the BMW repair would be to replace the whole turbo, but that would cost thousands. Today, I'll show you how to fix them yourself for only 100$.
Like + Subscribe for more BMW content!
Follow my Instagram / aza14782
00:00 - 00:59 Intro
01:00 - 02:45 Kit Overview
02:46 - 04:58 Disassembly
04:59 - 08:12 Remove Bushing + Flapper
08:13 - 11:27 Install New Bushing + Flapper
11:28 - 12:40 Install New Arm
12:41 - 13:17 Install Wastegate Actuator
13:18 - 13:54 Final Test

Авто/Мото

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@bcirstea9910 Месяц назад

I can see now why the Dealer won’t replace it, and just goes for a full turbo swap. Thx for the vid

@pinakidas397 Год назад

Every video you upload goes to my favorites folder

@vincentyerkess7230 8 месяцев назад

Excellent, informative, and well edited video. I don't even own a BMW, I just find your content mesmerising. Well done.

@drenicott5496 Месяц назад

Bro that was the greatest Tutorial i saw online! Thanks for Sharing this with us!

@alfworks 9 месяцев назад

Very nice video and detailed explanation. Hope I'll never need it though! :) Thank you!

@spulbi Месяц назад

Yeah, this is the fix. My 2015 X5 has been getting drivetrain malfunction events, with a "low boost" code. Wastegate rattles up and down a crazy amount. Sounds like i have to drop the subframe... or the whole engine to fix this. Sigh.... For those wondering, it wasn't the bpv or the MAF. Dang wastegate. I've also replaced the ewg, and that kept me going for another 2 years without codes.

@user-us7jt5py5k 7 месяцев назад

Bravo you are amazing!

@Danny323f 4 месяца назад

Nice work next time cover the oil intake. to be sure no debris wil get in.

@MegaCokecake 8 месяцев назад

Exelent video! Thank you very much for this. I have N63 engine, recently installed catless downpipes and I can hear my wastegates rattling now 🤦🏻‍♂️ Thanks to your video, I will try replace my wastegates. Can I ask for a link where I can buy those wastegates? Thanks

@oleksandrdiachuk2978 10 месяцев назад

Thank you for the video! What welding machine did you use?

@miroslavblaskov1711 3 месяца назад

How many miles on the car? Great video! I did the same repair and it helped me a lot! Thanks!

@daviddavidson3606 7 месяцев назад

This is the way

@hamzamo95 9 месяцев назад

Hello, what size is that long bolt to press the bushing out please?

@martin2114 8 месяцев назад

Where can one get the insertion pin? I don't see it on the ebay kits. Thanks

@thereaperboyz5555 3 месяца назад

Been having a n54 for a while but never drive it because I wanna tackle everything before it even gets to needing to be replaced at higher mileage, I think I’m about ready to do it all at once ….

@christophorusvids Год назад

Great video. Your turbos have low kms, I'm scared to see how bad mine are with 150k.

@lou007 7 месяцев назад

well demonstrated VIDEO man , but i heard that the welding could be weakened and fail while operating, is that true or how this fix shall last? thanks appreciated

@bimmer.doctor 7 месяцев назад

Thank you! I wouldn’t worry about the weld as they are originally welded at the factory anyway.

@lou007 7 месяцев назад

@@bimmer.doctor seems legit! 😅 How's the 750li holding I'm sure it's flawless! Loved the series 👏 Any n54s soon ?

@bimmer.doctor 7 месяцев назад

@@lou007 All working well! The newest series is on the N20 which I already have a couple of videos on. I don't think any N54s but there are other cool projects coming soon!

@derekkchung 9 месяцев назад

Install a thin wave spring washer in the shaft and flapper? Correct me if I am wrong. Rattling is due to the worn shaft and flapper that when it is not closed, it is rattling. As long as certain vac is applied and the flapper can seal up the wastegate, there is no code (30FF) or performance issue, right? Even we can hear the rattling (during idle or when turbo is not used), if we adjust the rod (correctly so to the right Hg), flapper can ALWAYS seal up the wastegate, am I correct?

@bryanderksen4448 6 месяцев назад

The adjuster rod isn't the issue. When the bushing is worn, the flapper doesn't always lay flat over the hole in the turbine, allowing for boost loss. Adjusting the rod will change the pressure on the flapper arm but if the flap is out of alignment to the hole, boost leaks occur. I had the same issue on my N54. Under medium or heavy throttle it seemed that the rod was more able to pin the flapper shut to facilitate the boost demand, and it didn't leak. The problem occurred most often during part-throttle or throttle adjustment situations when the boost levels were lesser and the actuator rod wasn't applying as much pressure on the flapper arm, allowing it to move around more randomly. For me it was adjusting from 110kmh-130kmh-110kmh when moving with the ebb and flow of freeway traffic. Suddenly the dreaded half-engine symbol would appear (reduced power) and the wastegates would immediately be sucked open, eliminating any boost. That's annoying and also dangerous when you're in the fast lane with all the big dogs.

@user-ks7zg6qm3r Год назад

Спасибо за видео и обзор 👍 можно попросить написать номера деталей, которые были заменены? Спасибо.

@bimmer.doctor Год назад

Thank you! Since this is not an official BMW repair, there is no part numbers, but if you search on eBay "wastegate repair kit n63" or whichever engine you have, it will give you lots of results. This only cost about ~100$ USD