How To Flush Old Brake Fluid | 2nd Gen Toyota Tacoma Brake Fluid Flush! 

Very helpful. Thank You

Good step by step how to video.

Thanks for the video I’m getting ready to do mines your video really is going to help me

Great video. I'm getting ready to do mine this weekend. I just wanted to add, that what shortens the life of brake fluid is moisture. It readily absorbs moisture from the atmosphere, hence the short shelf life once the seal is broken. Once the fluid becomes contaminated with moisture it lowers the boiling point of the fluid causing brake fade and sponginess.

Great Video , Thanks!

A tip that helped me out was to cut a small piece of tubing at the end of it each time I connected it to the bleeder valve. I felt it was more secure to the bleeder valve for me. I finally replaced all my fluids in my truck due to your videos. Thank you!!

This was a great video that I will be attempting to copy tomorrow. Just changed my rear brake lines and when trying to bleed the rear drums with a vacuum pump, no fluid would be coming out unless I got back in the cab and pumped the brakes a few more times (back and forth). Apparently the ABS module is keeping the bleeder pump from doing the job by itself without also pumping the brakes. Ill have to copy your idea of looping a hose up high to an empty jug then just pump the brakes from the cab. I've always heard people talking about doing a gravity feed by themselves, but they never mention looping the hose up high to keep air from getting back into the bleeder valve. *side note* would you recommend having the ignition on or the engine running when bleeding the brakes to make it easier?

so close the valve when they're letting go of the brake? awesome video btw I subscribed I have a 2012 tacoma

Do you have to place or move the key to the on position in the truck ?

Do you pump with the cap on or off?

So you don't have to attach it to all the bleeder valves?

On these tricks I would try to use as much OEM parts and fluids. Toyota sells everything at the part counter. I would buy everything Toyota or your 1) not supporting Toyota which put out these tank of a truck and 2) I would not trust any other brand to produce something that’s good for a Toyota. I switch out on power steering fluid once and I know it caused problems not regular wear and tear.