In this video I will be showing you how to properly install a brand spanking new rear main seal, clutch, pressure plate, throw out bearing, and all of the the other parts we removed to be able to get to the clutch. This can be a big expensive job so why not try to do it yourself and save money/become a gearhead!
Jump to spots in the video:
00:24 What is a rear main seal?
00:51 Why should you change the rear main seal?
01:35 How to replace the rear main seal
06:07 How to install a new throw out bearing
09:15 Test fit your clutch plate on input shaft
09:40 Installing the machined flywheel
11:50 Cleaning and installing the clutchplate/pressure plate
14:06 Installing the transmission and the lower transmission to engine bolts
15:45 Installing the rear engine mount
16:20 Installing the cv axles
16:43 Installing the lower ball joint
16:33 Installing the cv axle nuts
17:56 Install the wheels
18:30 Installing the new transmission fluid
19:53 Installing the under engine cover
20:08 Installing the last transmission to engine bolts
20:28 Connect the 2 electrical connection at the back
20:37 Install the transmission cable bracket, wire loom, cables/clips
22:20 Install the starter motor, the main positive cable, and the solenoid trigger wire
23:02 Install the clutch slave cylinder and brackets plus ground cable
23:50 Install the driver's side transmission/engine mount
25:00 Remove the engine cradle and install the engine cover
25:25 Install the air box and ducting/purge solenoid/MAF sensor
27:41 Install the battery carrier and battery
29:38 Check the pedal height and test drive
Check out my Patreon where you can support the channel.
/ wayofthewrench
Or do you just feel like saying thanks and/or wanna support the channel?
paypal.me/WayoftheWrench
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Luk clutch kit 2008 Yaris amzn.to/3TZDCId
rear main seal amzn.to/3VYE9wD
seal driver kit amzn.to/4bhEq2f
black rtv silicone amzn.to/4aTK1vT
If you have any questions about the video, please feel free to comment and I will get back to you as soon as possible. Time me....
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at / way_of_the_wrench
If you enjoyed the video and/or learned some cool tech tips, I would appreciate a share out on your social media so I can be inspired to create more videos and continue to make better content for you guys! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Very special thanks to Guillermo Vargas for all of his work on the new "How to Become a Gearhead" intro. Super stand up guy who offered up his services and came through big time once again. Thanks bruh! It looks amazing. If you are looking for some custom advertising or graphic design of your own, hit him up on his Instagram Guillermo Zevallos Vargas or his website www.vargasportfolio.com/
Music for this very special episode by :
Music To Wear Fingerless Gloves To by Punch Deck
punchdeck.bandcamp.com
Promoted by @RoyaltyFreePlanet - royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
INTRNLCMD - Seasons:
• INTRNLCMD - Seasons [S...
INTRNLCMD - Coastline:
• INTRNLCMD - Coastline ...
Song: LAKEY INSPIRED - Chill Day (Vlog No Copyright Music)
• LAKEY INSPIRED - Chill...
Thanks to Teknoaxe for his royality free music for our outro music. Please check out all of Teknoaxe's sweet music tracks!
www.teknoaxe.com
Outro music is Sythwave E
www.youtube.com/watch?v=RBxnY...
My Line - Synthwave - Royalty Free Music
• My Line - Synthwave - ...
Way of the Wrench is looking for a collaboration with any RU-vidrs out there hard at work making royalty free music, just send me a message with your link for consideration. If you have a tool/product that you would like us to review or use in our videos, send me a message to discuss details.
Disclaimer: These videos are intended for entertainment and inspiration. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe.
9 авг 2023
