No video :(

HOW TO INSTALL A-PILLAR GAUGES FOR A 370z!

Подписаться 689

Просмотров 3,2 тыс.

50% 1

I couldn't find a very clear video on how to wire in a set of gauges for a 370z, so I decided I would make my own! I hope this helps you get a clearer idea on how to do yours. Let me know if it helped in the comments below, and leave a like if you enjoyed. Subscribe to see more content like this as well as much more track action!
Visit the ESCustoms website to get your own A-Pillar gauge mount!
www.escustomsn...
Follow my IG: / milburn_motorsports
Music by:
/ audiolibrary-channel
/ infraction

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@kkennethz 5 месяцев назад

This is by far the most detailed video for an aftermarket oil pressure gauge. This video gives me more confidence in doing this myself. Thanks!

@MilburnMotorsports 5 месяцев назад

I’m glad it helps! That’s exactly what it’s for!

@rs_370z 4 месяца назад

6:10 waht happened to the previous engine? 😲

@MilburnMotorsports 4 месяца назад

Oil starved on the track due to not having enough oil in the car, and it locked up. I was away on a trip and let my brother and father use it and they overlooked it. It happens!

@andrewmarquez542 Месяц назад

What fuse tap did you use

@avie1679 5 месяцев назад

What extension cord did you buy? Link??

@danielsalazar7774 2 года назад

How did you take off the A column interior trim piece?

@MilburnMotorsports 2 года назад

There is a piece holding the a pillar cover on about halfway down. You need to rotate it 90 degrees to release the a pillar cover, theres two little prongs that go in that need to turn. Once it's turned and the prongs are lined up with the hole, it should come off

@damiancolombo3485 Год назад

Is it safe to hook up the 16 gauge wire from the fuse tap to a 22 gauge wire for the sensor

@MilburnMotorsports Год назад

I don’t see why there would be an issue with that, try it out 👍

@robsgotbeats 2 года назад

what exhaust do you have? It sounds great

@MilburnMotorsports 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PpqJC-aea8s.html is my exhaust setup!

@JoeyAndVehicles 2 года назад

So I extended my sensor cables and that's all connected to my gague. But I'm left with the black,red,white,brown,pink and grey cables. All I have to do is power the red cable to a fuse like you did and ground the black? I don't need to connect the other white,brown,pink and grey cables? I have a aem analog oil pressure gague

@MilburnMotorsports 2 года назад

Correct, you do not need to connect the other cables! Those other ones are used to splice into the ECU for data logging purposes through the sensor, if I recall correctly. It is not required to connect to have the gauge work properly

@JoeyAndVehicles 2 года назад

@@MilburnMotorsports Huzzah ! Thank you for you video and advice. Ima have to try it this weekend

@MilburnMotorsports 2 года назад

@@JoeyAndVehicles yeah go for it! Seems like you already got he hard part done, lmk how it goes 👍

@JoeyAndVehicles 2 года назад

@@MilburnMotorsportsI just had to connect the red, pink and grey wires together for mine older style one. It's plugged to the cigarette lighter fuse and everything works good 👍 Thank you for your help !

@MilburnMotorsports 2 года назад

@@JoeyAndVehicles no problem! I’m glad it was a success