How to Install Cartridge Pool Filter Housing || Converting 2" to 1.5" || DIY Pool Repair 

In this DIY I will show you step-by-step how to install a cartridge pool filter housing. I went with a Hayward filter system, but these instructions will apply to pretty much any pool filter. I also had to convert the 2" Hayward filter down to 1.5" in order to connect it to my existing pool plumbing. I will explain this process as well.
This is the latest version of the Hayward filter I installed. It's a fantastic filter system. If you are planning on purchasing this and would like to support our channel, please use this referral link. Thank you!
Hayward W3C17502 SwimClear Plus Cartridge Pool Filter, 175 Sq. Ft. - amzn.to/3rh9TQC
---------------------------------------------------------------------------
Materials:
PVC 2" Coupling - amzn.to/3LNcmJN
PVC 2" x 1.5" Reducer Bushing - amzn.to/3PFh6U1
PVC 1.5" 90 Degree Elbow (6 pack) - amzn.to/48keu5l
PVC Pipe 1.5" - amzn.to/48dSkl9
Christy's Red Hot Blue Glue and Purple Primer - amzn.to/3PFqgzO
---------------------------------------------------------------------------
Tools:
PVC Pipe Cutter (up to 2.5" Pipe) - amzn.to/3RjC8ZD
Tape measure, level, pencil