How to Install Gable Trim For R Panel and PBR Metal Roofing: Includes Cutting Rake At Eave And Peak

Подписаться 44 тыс.

Просмотров 353 тыс.

50% 1

Learn how to install gable and rake trim on R Panel or PBR metal roofing panels. Detailed step by step installation instructions that explain everything. By the time you're done watching this video you will understand how to install like a professional.
00:00 How to install gable trim for R Panel
00:48 Gable trim installation for PBR panel at the eave ends of the metal roof
04:50 How to prepare and measure gable flashing at the roof peak
08:48 How to fasten gable trim for R Panel roofing
12:12 How to install gable trim for R Panel at the peak of a metal roof
15:08 How to install foam closures for R Panel at the peak of the metal roof
18:10 How to fasten peak trim for PBR Panel
If you already have not purchased your R Panel or PBR panels give us a chance to bid your job. Save 15% to 50% with our manufacturer direct pricing and great customer service. Inexpensive delivery anywhere within the United States.
Visit Our WEBSITE
bit.ly/wsmr-website
Visit our LEARNING CENTER
bit.ly/learning-center-wsmr
Download Our PBR Panel Installation Guides
www.westernstatesmetalroofing...
In this video we will explain the following metal roofing installation details
1. Rake trim installation at the eave of the metal roof
2. How to prepare and measure gable flashing at the roof peak
3. Fastening gable flashing for PBR Panels
4. Gable flashing installation at the peak of a metal roof
5. Foam closure installation for R panel at the peak of a metal roof
FOLLOW US ON SOCIAL MEDIA:
FACEBOOK: bit.ly/facebook-wsmr
INSTAGRAM: bit.ly/instagram-wsmr
TWITTER: bit.ly/twitter-wsmr
LINKEDIN: bit.ly/linkinin-wsmr
HOUZZ: bit.ly/houzz-wsmr
PINTEREST: bit.ly/pinterest-wsmr
RU-vid: bit.ly/youtube-wsmr

Опубликовано:

22 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@mahandmaajuno6607 Месяц назад

Very much appreciate the slower speed of your instructions. Clear and precise detailed instructions. You are worth your weight in gold. Many Thanks

@fsca72 2 месяца назад

In these how to metal roof videos the ribs always magically line up for gable trim and sidewall trim. What happens when this stuff doesn’t line up in the real world. Say screw mounting point lands right on a rib or your building is old and not square. Those are the tricks I’d like to see

@eliazarterrazas4535 9 месяцев назад

This guy is a genius in my eyes. Great job with the folding. It really helped me with my shed although not as clean as your folds and cuts, it was the solution i. Needed. Thanks

@user-xp4mc6kz1u 20 дней назад

He's no genius but he knows what's up

@froymena.pnwroofer 5 месяцев назад

Great video! As a roofer I’m impressed on how much knowledge you and your team have! Great videos

@jasongoodwin8481 2 года назад

Salute, to you Mike, great work with the snips. I learned from watching what you can do.

@jeffvanderveen2890 Год назад

Well , at first I saw how long your presentation was going to be ,and I was going to skip it . But my dad told me to always go with my gut instinct. I'm very happy I watched it till the end . It was very Informative and you didn't cut corners. Thanks

@archmasterone 9 месяцев назад

Good video explanation. I wasn't distracted by the gauges in the ears or the full sleeve tattoos on a grown man although it did take my attention off of the "big boy" pants. For real?

@feetiesiz Год назад

Very informative, though I would have liked to see close-up shots of the ends to understand more on how the corners should look after installing. It was shown just not close enough for a novice as myself.

@btjohne 5 месяцев назад

Sharp and Smooth presentation. TY

@orbit3905 Год назад

excellent presentation. Well done.

@garrett3113 Год назад

Reminds me of some roofing I did a couple years ago. Lol nice work.

@vitikeshwar44 Год назад

Excellent job sir

@harrycrannell7895 Год назад

Awesome video.

@hipolitozamorano2214 10 месяцев назад

Real nice keep more videos coming 👍

@kylclrk Год назад

Wow, this was super helpful. I wish I had found this when I was building my shed.

@2loco Год назад

Good job bro.

@Puddy0859 Месяц назад

this was the best explanation for this I have seen. Thank you

@steveburke3 Год назад

Thanks for the video Mike. How do you trim a rake that angles up to the ridge? Meaning the ridge is longer than the eaves below, so when the trim is applied the butyl tape can not be applied because the peaks and valleys of the metal roofing panels are leaving 3/4" gaps between the rake trim and the valley of the roofing panel itself.

@brandongranados5569 Год назад

Nice

@michaelfarmer537 2 года назад

Thanks for taking the time to put this on the tube and share knowledge! Sharp looking trim detail my dude! Be sure to go check out Kyle over at RR Buildings. He’s got some more great trim work details!

@T.G437 Год назад

What can you do to bring rake trim and drip edge to meet in a valley?

@kriswibbenhorstermeister9885 8 месяцев назад

Do you have a video for a scenario where you need to cut a standing seam roof panel to fill in a few inches on the edge? My gable trim doesn’t quite overlap at the edge so I have to cut a small piece at the edge?

@pmacc3557 6 месяцев назад

Great work. I thought you'd leave room for air circulation therefore no end foam?

@dalefreeman1687 Месяц назад

Why do the videos I find always show the end of the roof the has the side of the panel with the extra "foot" tab along the edge that can be screwed down, but none show the end of the roof that has the shorter overlap edge and how to fasten it or trim it if there is too much overhang over the end of the roof?

@zach4662 Месяц назад

How do you do it with a gable roof transition??

@rocknral 5 месяцев назад

What is this sealing tape for? I live in an area that receives over 12ft of rain per year. Sometimes it's torrential (we've had 2ft in 12 hrs) and never ever use this tape, and never ever have a leak. If it's flashed properly, you don't need to waste your time doing this. On the ridge, turn up the pans 60 + degrees and the ridge cap should have ave the break into the pan like his barge/facia flashing. Scribe this to the profile and it weather proof. If you have gutters, 3 inch over hang is 1 inch too much. You'll understand if you want to clean your gutters.

@russellriner8501 4 месяца назад

Can you give me the dimensions of the gable trims installed? Trying to get both of these pieces fabricated by my metal supplier and they need the measurements.

@woodcutter7347 4 месяца назад

The caulking on closures seem messy on a job outside in the real world. Those things blow all over the pace. I would recommend getting them with the glue already on them. Just peel the tape off and stick it to the metal. Nice assembly tho

@judithwise4997 11 месяцев назад

Sure would be nice if you could show where these pieces are relative to an actual roof application. You understand what your talking about because you have a picture in your head. But I certainly have no idea what the peak cap is relative to the end cap cuts? To match these two? Pictures of finished product so we have an idea of rekavance

@feetiesiz Год назад

One question I have is can you use caulk instead of Butyl tape?

@mechinized4685 Год назад

Acrylic chaulk would work. But, spend the money for a good product with at least 30-40 year expectation.

@jesusorozcogutierrez9999 2 года назад

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@joshuasmith1215 Год назад

Holy confusing for anybody who doesn't already semi know what they're doing and watching this for a quick review.

@3karolek Год назад

what sealant are you using?

@WesternStatesMetalRoofing Год назад

We use Nova-Flex. You can see it here on our website: www.westernstatesmetalroofing.com/novaflex-metal-roof-sealant

@mazarnelli 5 месяцев назад

At 4:55, he says the panels overhang the eave 3" and then at 8:50, he says 4 1/2". Am I missing something??

@robsmith6087 8 месяцев назад

It's strange that in the U.S. you screw into the pan, in Australia we screw through the ribs.

@Sum-Ting-Wong71 2 месяца назад

On these panels you would also screw through the ribs using longer screws, but only on the overlap between each adjoining panel.

@lestermcmurray577 Год назад

About to attempt a small first metal roof and absorbing information and have a question! Always remove the burrs from drilling, they will cause rust stains I hear this over and over but never in any video have I heard anyone paint the ends of flashing or trim? wont the exposed metal caused by trimming rust and do the same thing????

@WesternStatesMetalRoofing Год назад

Galvalume is sort of self healing when cut correctly such as the shear of a roll forming machine. As long as you use the correct tools to cut the trim you should be fine. If you would like to put touch up paint on the exposed ends of the trim, it would not be a bad idea. Just buy the same touch up paint as the paint system of the trim. Whomever sold you the material will be able to supply touch up paint.

@StrainingDingelberry 27 дней назад

I had to leave the video due to the heavy breathing.

@ivanguthrie0420 Год назад

So easy to do…from the ground…this is done on a roof in the real world 😂 and it is super slippery…easy installation 😂

@jonathan3982 Год назад

Yeah and I've never seen ridge cap like that, that is not normal ridge cap.

@mule666 5 месяцев назад

Show us hero

@jonathan3982 Год назад

You're saying that is Ridge Cap? I've never seen Ridge Cap that looks like that.

@user-mindmeld Год назад

I think he slipped up there. Think he meant peak gable/cap. Like a shed cap with a tongue

@jonathan3982 Год назад

@@user-mindmeld Well I've never heard of that. Ridge Cap looks nothing like the second piece he put on.

@jonathan3982 Год назад

@@user-mindmeld I know what gable trim is, the second piece wasn't gable trim or ridge cap. Oh well.

@montanaplease Год назад

I guess I really don’t understand the reason behind the tape and the foam for leaks. After all you’re putting it on top of the metal roof that already shouldn’t leak right? I’m definitely not saying anybody’s wrong here I just don’t understand it

@bnvcharger07 9 месяцев назад

Foam goes under the ridge cap. It's a real dense foam so driving rain does not get under and inside the ridge. Also keeps bugs and spiders out. That's what it's for