How to install GY6 Cylinder Top-End on SSP-G 180cc POWER KIT Part #7

Подписаться 10 тыс.

Просмотров 72 тыс.

50% 1

Thank you for watching and supporting my channel feel free to use my referral links. If you need help with any of these products call or text me Mike (209) 355-8088. I usually respond within 24 hrs.
--------------------------DO IT YOURSELF--------------------------
Time Required: 60-120mins.
Skill Level: Advance
Chemical List:
• Bel-Ray Oil Exl Mineral 4T 10W-40 amzn.to/2TPO6dZ
• CRC Freeze-Off Super Penetrant amzn.to/2wn3BSN
• CRC Sta-Lube Anti-Seize Engine Assembly Lube amzn.to/2uK30Kp
• CRC Sta-Lube Moly-Graph Grease amzn.to/2uJlkTQ
• CRC Throttle Body and Air-Intake Cleaner amzn.to/2x5HMrd
• Easy-Off Oven Cleaner amzn.to/2UBfgWm
• Gunk Engine Degreaser amzn.to/2Jfp17A
• J-B Weld Steel Reinforced Epoxy amzn.to/2Qi4t1U
• Loctite Threadlocker Blue 242 amzn.to/2TqYtF3
• Lucas Oil Brake Cleaner amzn.to/2xwxdNU
• Lucas Oil Brake Fluid amzn.to/38WvQp2
• Marvel Mystery Oil amzn.to/2Ugn5Sr
• Mobil 1 Synthetic Gear Lube 75W-90 amzn.to/38yHtCh
• Mobil 1 Synthetic Grease amzn.to/38h6ilO
• Permatex Copper Spray-A-Gasket Hi-Temp Sealant amzn.to/2wkt4Mw
• Permatex Dielectric Tune-Up Grease amzn.to/39CcA14
• Permatex Permashield Gasket Dressing & Sealant amzn.to/38PvXCF
• PJ1 1-12 Cable Lube amzn.to/2WBwUvZ
• Rust-Oleum Rust Dissolver Gel Spray amzn.to/38C0DHb
• Sta-Bil Starter Fluid amzn.to/39bBy6o
• WD-40 Penetrant Spray (Blu Torch) amzn.to/3cotcLn
• Q Tips Swab amzn.to/32VZo4J
• Scotch-Brite Non-Scratch Scrubs amzn.to/2W530Qp
• Scott Shop Towels amzn.to/32Hjwau
Parts List:
• Ban Jing High Torque Starter Motor goo.gl/wTTSJn
• Ban Jing Starter Clutch Heavy Duty bit.ly/3cJUxYz
• Cam Chain 46 Links goo.gl/aE99tQ
• Camshaft goo.gl/oaZK7f
• Camshaft Holder 57mm goo.gl/ByqgHD
• Ceramic Piston 63mm goo.gl/pwne7a
• Cylinder 63mm goo.gl/pwne7a
• Cylinder Head 2V goo.gl/P7t4e5
• Cylinder Stud Set- 196mm 204mm goo.gl/XZF1GP
• Cylinder Gaskets 63mm Set goo.gl/hC7mwQ
• Naraku Intake Manifold Coated Non-EGR 32mm bit.ly/2vMyIY0
• NGK Spark Plug Iridium CR7HIX bit.ly/2TOopup
• Rocker Arms Assembly goo.gl/PG17mt
• Shorai Lithium Battery 12V 14Ah bit.ly/3d03IV6
• Shorai Lithium Battery Charger bit.ly/2w6OhK9
• Valve Cover Non-EGR goo.gl/HzFu1d
• Zip Ties 12" amzn.to/32GtBo5
Add-on (optional):
• Chain Guide (standard) amzn.to/2uJDR2i
• Dowel Pins 8x10mm Set bit.ly/39B3oKf
• Dowel Pins 10x14mm Set bit.ly/39CKaE5
• NCY Valve Springs 11,000 RPM 2V bit.ly/39bYT7T
• Oil Chain 22 Links goo.gl/ozLb65
• Performance Oil Seal Set bit.ly/2VCyxsI
• SSP-G Viton Valve Seal Set bit.ly/2wAYcHZ
• Starter Clutch Nut bit.ly/3cJTlo8
• Taida Cylinder Head 67mm 2V 30.5/26.5 bit.ly/3brxDEe
• Taida Camshaft T-300 2V 6.3/6.25 bit.ly/3blYG3A
• Taida Rocker Arm Assembly 2V bit.ly/39ggjAr
• Taida Valve Springs 12,000 RPM 2V bit.ly/2UdRErQ
• Taida Valve Spring Retainers Titanium bit.ly/3aifRmy
• Woodruff Keys bit.ly/39yuaDe
• NCY Super Transmission Set goo.gl/hFUSqB
• Bando 835-20-30 CVT Drive Belt goo.gl/dHKAUv
• CVT Cover Anklebiter Ultimate bit.ly/3aG1qIQ
Tools Used:
• 8mm Hex Socket amzn.to/39AuO34
• 7mm, 8mm, 10mm, 12mm Sockets w/4" ext. Wrench amzn.to/2vow36J
• 5/16", 9mm Open and Adj. Wrench amzn.to/2vow36J
• 5/8" Spark Plug Socket amzn.to/2LT2kan
• Bearing Separator and Gear Puller Set goo.gl/Vs6C6Y
• Big Head Phillip Screw Driver amzn.to/2vow36J
• Cable Lube Tool amzn.to/2WBvpxy
• Feeler Gauge .004, .005, .006 amzn.to/2wjyiIq
• Flat-Head (narrow) amzn.to/2vow36J
• Flywheel Puller goo.gl/GNToF7
• Heat Gun amzn.to/2uHQU4i
• Hydraulic Compression 12-Ton amzn.to/3axX8mT
• Impact Drill amzn.to/2wsdfDp
• Impact Socket 17mm amzn.to/2uReXOu
• Impact Socket 39mm amzn.to/2PXNjX8
• Mallet Hammer amzn.to/38gJumk
• Multimeter amzn.to/2xe4qhc
• Needle-nose Pliers amzn.to/2vow36J
• Oil Cannister Pump amzn.to/334xxPz
• Oil Drain Pan amzn.to/330TEGM
• Oil Funnel amzn.to/2vR8D9Z
• Propane Torch amzn.to/38g4bPw
• Seal Driver #4, #6, #7 Set Kit amzn.to/38gxwJq
• Slide Hammer and Bearing Puller Set amzn.to/2x53xHE
• Starter Clutch Nut Socket 3.25” min-ext goo.gl/5rMgtS
• Torque Wrench 5-35’ Foot Pounds amzn.to/32O0FL8
• Variator Tool bit.ly/3cqJHGY
--------------------
Need more info on GY6 BIG BORE KITS?
Visit our Blog Share: ncystore.com/blog

Опубликовано:

10 июл 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@MFP2241 5 лет назад

When cylinder refuses to slide in butter-like fashion (as it should), you can try squeezing those four spigots gently towards the center. They are long and not fully straight, thus producing friction enough inside their own guide holes to prevent free, even cylinder sliding. No slamming with mallet is recommended, nor it should be necessary at all. Same goes for cylinder head. Good old WD-40 could also be of great help. But no slamming.

@NCYSTORE 5 лет назад

I'll keep that in mind if you watch the next video you'll see that they actually sent me the wrong one of 54 millimeter stud spacing cylinder versus what I needed was a 57 cylinder stud spacing.. hahaa. Me Lesson learned.

@richardthingsilike9562 3 года назад

This was very painfull to watch! but i could not stop.

@NCYSTORE 3 года назад

thanks for support my advertisers.

@mesniburek. 2 года назад

frr LOL

@AttillaDeHunt 6 лет назад

My goodness, man, WHY are you beating that thing like that?? It should not take that kind of force to get that in there.

@NCYSTORE 6 лет назад

Jeffery A. Hunt I'm glad you caught it I didn't bother measure it and our distributors did send the wrong cylinder housing it was made for 54mm stud spacing not 57mm stud spacing as to way i been ponding it.. long story short I did get it in but the price of cracking the cylinder scale fins. You're right you should only tap the most 5 light taps mine was like almost 50 heavy taps! I'll post the correct cylinder housing video 57mm and show the difference how easily it should fit in without that much force. No wonder the dowel pins would not align inside either in top end units to the crankcase that should have been the warning sign already incorrect cylinder stud spacing.

@user-de6cd8vb2c 6 лет назад

nice g

@steveb936 Год назад

DONT take any notice of this guy, you SHOULD NOT be using any sort of hammer / mallet to drive that cylinder down

@robwinter3183 8 месяцев назад

I can spind the motor by hand, but my piston seems like it's very tight in the cylinder. Is this normal? Maybe since it's brand new and not broken in? Thoughts?

@user-jn8ds2bd2g 2 года назад

за идею по поршню в цилиндре перед установкой огромное спасибо

@fashionstreet1 5 лет назад

I tightened the starter clutch bolt counter clockwise with a impact wrench maybe to tight? Should of hand tightened it is the cause?

@NCYSTORE 5 лет назад

Yes hand tighten it with a tool

@danieleriksson9249 Год назад

Im confused, did you put the chain guide upside down?

@kevinstearns4198 6 лет назад

i just did my 150 scoot top end the cylinder went on mint u dont need to hit it like that u have the cylinder studs bent.

@NCYSTORE 6 лет назад

Kevin Stearns absolutely right I haven't got back into showcase that the manufacturer actually sent me the 54 mm stud spacing which I assume we're 57 mm stud spacing it's wife dowel pins wouldn't actually fit just need to tap it a few times the most with a mallet hammer I got the correct part in there now but yet to have time to complete the video thank you for pointing that out.

@fashionstreet1 5 лет назад

Great video 👍 tutorial NCY I installed the 180cc bore kit on my 157qmj and had to redo everything again but this last time I completed it I tried to start it something I did in the process of reassemble it wouldn't turn over the timing was top dead center and the cranckshaft and piston wouldn't turn I tried to turn it the stator with my hand it wouldn't not turn like seized up? Any suggestions plz?

@brucesweatman2146 4 года назад

Question? Changing over from a 150cc to a 180cc head do you have to bore the case or does it fit? nicely?

@KylesAdventures1994 4 года назад

You have to bore the case

@worldcollections2839 5 лет назад

Please I need your Help : I have set up a new gaskets for my GY6 150cc then after all that : I turned on the Scooter on the idle screw without opening more gas. but it works not regulary : while it is in the kick stand the rear wheel stops then moves slow then a little speed then stops the biggest problem is that the sound of the scooter is like AK47 Rifle you can hear it from 500 meters away . I suspected the Stator or Spark plug itself then the Gas Mixture screw maybe need to be closed a little : also I suspect that the Exhust need a New Gasket to make the soun lower ,, please tell me what is that Problem ?

@pacheco464 Год назад

How many psi need to start? Mean good engine?

@fashionstreet1 5 лет назад

I have a gy6 150cc 157QMJ installing a 180cc big bore kit what is the correct cylinder housing for it?

@joshwelch5730 4 года назад

Do you have to bore the case or space it to get it to slide in

@trapp7763 6 лет назад

I have a tao tao 50cc scooter. is there any way to change the front wheel from a 10 inch to a 12 or 13?

@NCYSTORE 6 лет назад

Tra vis if it's a short case will be probably not it was a long case you do have a chance if your frame also allows it. Here's how the term if you have a short case or long case 139qmb by the belt size: ncystore.com/bando-729-18-30-cvt-drive-belt-qmb-longcase

@williamlynch6095 11 месяцев назад

Let me ask you you had to split your case remove the crank and buy a special tool to shave the case or the 180 big bore kit won't fit the biggest you can go is 171cc with out shaving the case this is a fact

@eltonscruz 2 года назад

And the needle bearing is not necessary?

@hromyblesky121212 6 лет назад

Hello... how much milimeter on gasket cylinder (bronze)? Thx

@NCYSTORE 6 лет назад

hromyblesky121212 the gasket you're looking at is 63 mm gasket as far as thickness of spraying on the bronze just a nice even coat. Does this answer your question?

@hromyblesky121212 6 лет назад

what is its thickness? My piston rattle on head NCY STORE

@mtlnascarfan 6 лет назад

I guess I'm stopping here because I can't find video #8 anywhere since it's not clearly titled. I'm done, buddy...later.

@NCYSTORE 6 лет назад

mtlnascarfan yes this is where it ends for the 180cc build we haven't got come around and finish that video shoot. Thank you for visiting our channel and commenting, much appreciate the constructive feedback.