How to Install the Easiest and Quickest Outdoor Socket - Anyone Can Do This!

Подписаться 307 тыс.

Просмотров 47 тыс.

50% 1

In this electrical DIY guide i will be showing you how to install a new outside socket. I will take you through the process step by step! If you like the video then leave a like, please subscribe for more content like this and check out the other videos on my channel, there are a lot more electrical guides!
🌟 Quickwire can be found here - bit.ly/Quickwire-Website
Products i recommend for this job!
🔵 Tracer Pencil - amzn.to/46v1RSD
🔵 Socket Tester - amzn.to/46v1YO3
🔵 Voltage Tester - amzn.to/3Tezh5h
🛒 My Shop - www.amazon.co.uk/shop/thediyguy
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra. If you are not confident or competent undertaking electrical work then you should have this work undertaken by a qualified electrician.

Хобби

Опубликовано:

22 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@TheDIYGuy1 5 месяцев назад

Don’t forget to check out my other video on this topic and use them both to help you get the job done!

@anwarbutt4403 5 месяцев назад

I love your videos enabled me to install down lights in my bedroom, my question is I have done the same for each room and we have 4 bedroom plus 1 bathroom so now we have in total about 35 lights 8w led enlite down lights on the daisy chain, my question is what’s the limit ?.

@anwarbutt4403 5 месяцев назад

Can I use an extension lead to switch in to this socket ?.

@BarryBulsara576 4 месяца назад

I always wondered why the drain holes are on the vertical rather than the horizontal bottom piece of plastic? Water would have to fill the bottom by at least a centimetre or 2 before it started to drain on the current vertical...Worth bearing in mind that I'm an idiot and don;t know what I'm talking about, but I always wondered anyway 🙃

@007floppyboy 5 месяцев назад

No matter how much sealant or IP rating you have, water will get in. Best thing is to drill a small 1-2mm (Not 5-6mm as in the video) hole near the back of the box, that means if water does get in, it has somewhere to run out, and this still keeps a rating of IP34

@storyrole 5 месяцев назад

Good to see a DIY electrics video with a proper safe isolation procedure!

@TheDIYGuy1 5 месяцев назад

Thanks a lot. Always be safe!

@JuiceBanger1 5 месяцев назад

i have 2 non contact pens and had heard not to trust them and I wondered why, now I know, used them both last week on a live wire , as my first test and one didnt give a warning so I bucked it out. i always try to have more that 1 method of testing, and avoid sucking the wires.@@TheDIYGuy1

@cprog 5 месяцев назад

Great video! your accent makes it easy and comfortable for non-native speakers to understand, Thanks!

@TheDIYGuy1 5 месяцев назад

Your welcome

@patburke5740 5 месяцев назад

Great videos all year, i remember watching your first video 3 years ago on installing an outside socket, youve come a long way since then to becoming one of the best diy channels on youbtube. Happy christmas to you and looking forward to the content in 2024.

@TheDIYGuy1 5 месяцев назад

Thanks a lot for following for all this time. Have a great Xmas! 😊

@EARN-750-DAILY_JOB_FOR_U 5 месяцев назад

Your video is a true masterpiece! - "Every challenge you overcome is a stepping stone to success."

@stevewilliams6191 5 месяцев назад

Looks a great bit of kit, especially with the screwless terminals. Nice, well explained video. Thanks 👍

@TheDIYGuy1 5 месяцев назад

Thanks for watching!

@125sm3 5 месяцев назад

These quick connections make life so much easier. Great job and have a good Christmas .

@TheDIYGuy1 5 месяцев назад

Thanks you too!

@MyNamesGG 5 месяцев назад

Great explanation! The video I first saw on the channel was the outdoor socket video so this video pays homage to that!

@TheDIYGuy1 5 месяцев назад

Brilliant, thanks

@RabM1990 5 месяцев назад

Also make sure not to remove an RCD outside socket and replace it with a non RCD outside socket, mainly due to the use of equipment outdoors. Unless of course you have a 30mA RCD at the board. But Also ensure there is A type RCD protection as AC type RCDs do not have the same level of protection required according to the current 18th edition of BS7671.

@TheDIYGuy1 5 месяцев назад

👍👍

@markomoore1419 5 месяцев назад

Thanks Cameron, Happy Christmas 🎄

@TheDIYGuy1 5 месяцев назад

Same to you 😊

@jasonmorphew4359 5 месяцев назад

Nice one, thanks for another great video. Wishing you and yours a very Happy Christmas and a healthy New year. Keep them coming 😊

@TheDIYGuy1 5 месяцев назад

Thanks a lot. You too 😊

@ryanwood2011 5 месяцев назад

Well done pal, another fantastic video. Merry Christmas

@TheDIYGuy1 5 месяцев назад

Thanks , same to you

@danjames1663 3 месяца назад

Ive followed some of your videos regarding adding extra sockets I've done one for outside on a brick wall, extra safety ive put switch connection 13amp fused spur, it all works fine. when i test it with socket tester push test button should it trip whole ring its on or just between new socket to tve switch 13amp spur, basically like you get in the kitchen ie when washing machine under counter you have 13amp fused connection at the top to turn of when not in useing! Love your channel

@sajulldin5147 5 месяцев назад

Great video, and a great series on the house.

@TheDIYGuy1 5 месяцев назад

Thanks!

@keitho77 5 месяцев назад

Nice work! Luckily the pre-drilled holes didn't cause any issues when drilling the new holes, as they were so close. Sometimes the bit can drift and you end up with one enormous hole. Ask me how I know 😉

@TheDIYGuy1 5 месяцев назад

Thanks! Your right haha!

@swirlgalaxy 5 месяцев назад

Happy Christmas to you & your family!!!!!!!!! Big hugs from Kenny Ohio USA!!!!!!!!!!!!!

@TheDIYGuy1 5 месяцев назад

Thanks you too!!

@DjGiluk 5 месяцев назад

Great work 👍🏻👍🏻

@TheDIYGuy1 5 месяцев назад

Thanks 😊

@raj080288 5 месяцев назад

Great videa as always pal! Can you do a video on how to connect an integrated microwave and cooker together off one cooker switch please.. many thanks

@theOverthane 5 месяцев назад

Amazing video, start to finish! I would check out Stuart's (Proper DIY channel) take on drilling the drain hole, I'm keen follow his advice when I finally get to install mine here at home. The idea is that, drilling a hole makes the kit no longer IP6(x) water resistant.

@TheDIYGuy1 5 месяцев назад

Thanks. I think everyone has a different take on this. Whilst it reduces the rating from ip66, the drain hole will have no significant impact(unless directly spraying high pressure water at the socket maybe). In fact, in some cases such as the use of conduit you should always be drilling the drain hole due to condensation build up as stated by MK in the product detail.

@Pete.Ty1 5 месяцев назад

👍👍👍. Thanks Christmas wishes to you and your family.

@TheDIYGuy1 5 месяцев назад

Same to you!

@david-ky7rt 5 месяцев назад

Great video

@TheDIYGuy1 5 месяцев назад

Thanks!

@andytsang3239 День назад

Hi Cameron. Excellent video as usual. Im going to change an old pre-2006 outdoor socket for a new one. The circuit is protected by a 30mA RCD on the consumer unit so I know the socket doesn't have to have RCD protection. I will probably go belt and braces and install an RCD protected socket anyway. As I might use power tools then do I need to install an active RCD socket? Does it matter if it's a passive RCD if the main circuit is RCD protected? Also, for fixings you seem to use the same make rawl plugs 6mm? Can you tell me the make and also what screws to use for most fixings? I only have a jar of odd screws and would like to buy a stock for most DIY jobs now I've got the DIY bug from your channel!🤣 Thanks Andy

@user-hc6uo5fp8n 5 месяцев назад

good to see you using a socket tester before I got a socket tester I used a light bulb to make sure the mains went off>

@TheDIYGuy1 5 месяцев назад

👍 always be safe

@nassirirani6569 Месяц назад

Great job Bro, but in my mind was better to use the grey silicone around the part which was connected to the wall to make sure rain did not go anyway ,,,,,,, Thanks anyway

@campacolasworkshop6042 5 месяцев назад

I checked a while ago, but it is legal for a householder to put in an outside socket now, is that correct?

@mikeheasman2594 5 месяцев назад

What was the test results on the socket after installation.

@amazing451 5 месяцев назад

Good video Cameron, but are DIY'ers allowed to Installed the like of this socket as it is outside? A video I would like to see if possible is how you no that socket is not a spur off another spur and what can be done in these situations if possible. Happy Xmas and look forward to next year.👍👍

@BarryBulsara576 4 месяца назад

I always wondered why the drain holes are on the vertical rather than the horizontal bottom piece of plastic? Water would have to fill the bottom of by at least a centimetre or 2 before it started to drain on the current vertical...Worth bearing in mind that I'm an idiot and don;t know what I'm talking about, but always wondered anyway

@antkim7257 5 месяцев назад

Are these available in USA?

@michaeloverton3181 5 месяцев назад

Hello, great video ,what make of silicone sealant did you use,thanks

@Tom_Prendiville 5 месяцев назад

For this purpose it really doesn't matter as its more a precaution for water and bug ingress

@therealdojj 5 месяцев назад

those sockets are brilliant, done my entire house in them one thing i did find was that you "think" the wires are in but the design of the holes means the aren't so you have to push them in further than you would think caught me out the first few times when the wires kept pulling out on the tug test until i twigged very very difficult to explain but when you have the unit in front of you it's so simple anyway, lets do this quickwire thing as i've got 3 lights i need to fit (no discount codes? 😁 )

@TheDIYGuy1 5 месяцев назад

Your right, you have to be sure to check the connections are solid. The quickwire stuff really is good and is worth the money. Unfortunately they haven’t provided me with any discount codes for you guys or I’d of liked to pass a saving on.

@therealdojj 5 месяцев назад

@@TheDIYGuy1 I've had a look and I'll have to give them a call after Christmas because I'm not sure if you get the connectors with the lights or have to buy them separately In the mean time I'll just drill some holes before the plasterers turn up in the new year 😁

@TheDIYGuy1 5 месяцев назад

The downlights come with the connectors if I remember correctly 😊

@andysims4906 5 месяцев назад

Blimmy done your whole house with them. Great if you have a burst pipe I suppose but I will just stick with normal white type

@therealdojj 5 месяцев назад

@@andysims4906 with the lever sockets, not the ip66 ones in case that wasn't obvious 🤣

@user-ru2tf9pc8z 5 месяцев назад

Nice video.. where did you get the snickers hoodie from?

@TheDIYGuy1 3 месяца назад

thanks. You can purchase this from snickers. Its a lovely hoodie.

@willmitchell255 5 месяцев назад

And put the obligatory conduit through the wall to protect the cable ...........

@ddfann 5 месяцев назад

Great video as always. Quick question though about the drain hole, doesn't drilling this open remove to IP65 rating?

@TheDIYGuy1 5 месяцев назад

You are correct! This is stated in the product brief. However, I still perceive this to be extremely unlikely to suffer from failure due to moisture despite the drain hole being drilled

@ddfann 5 месяцев назад

@@TheDIYGuy1 Agreed, but I still leave the drain hole intact to preserve the IP65 rating.

@007floppyboy 5 месяцев назад

it comes to less than IP34 with a hole bigger than 2.5mm, but thats not an issue out side at home, you are not likely to spray it with a high pressure water jet. If its in an industrial installation that has washdown facility it may just get that, so then I wouldn't put a hole in. But then again, you wouldn't drill a hole in the back, you would use the correct bottom entry with sealing washers on a compression gland.

@GrahamSmart 5 месяцев назад

OR, rip it off, rewire, screw back on without touching the shiny bits :)

@chazM6116 5 месяцев назад

1st mention of RCD Lockout/off Electrical Kit --- 2nd. Building Regulations for an Outside Socket Any electrical work carried out on your property is subject to Part P building regulations. Basically, unless you are a certified electrician, then this is not a DIY job

@martinw245 5 месяцев назад

I think I would have repaired the blown out brick with some outdoor filler or quick drying cement. Then used the sealant in the conventional manner. Wouldn't have taken much longer.

@TheDIYGuy1 5 месяцев назад

You could do that if the damaged brick concerns you 👍

@user-yz6ul7iv6d 5 месяцев назад

Should this not have been a RCD socket as its outside the house

@TheDIYGuy1 5 месяцев назад

No as the circuit is RCD protected.

@wrighty7769 5 месяцев назад

0:24 you said RU-vid not youtoob 🥰

@TheDIYGuy1 5 месяцев назад

Hah I’m trying 😂

@Seb512 5 месяцев назад

First haha. Great video

@TheDIYGuy1 5 месяцев назад

Haha thanks 😊

@cookiemonster2299 4 месяца назад

I don't understand because normally governments have the peoples best interests at heart. 🙃🙃🙃🙄

@traiangrebencea7405 5 месяцев назад

1:07 "You need to be competent to perform electrical works" CORRECT! Do you need a tutorial video if you are competent? 😅

@andysims4906 5 месяцев назад

It’s a personal choice but I prefer to use electrical compound ,not silicone. It looks like a dog turd , never sets ,stays where you put it, sticks like glue but can be easily removed and reused as well.

@TheDIYGuy1 5 месяцев назад

👍

@kenkaminskyj3170 5 месяцев назад

What stops anyone turning your breaker back on ????????,why didn't you lock off?

@TheDIYGuy1 5 месяцев назад

This isn’t a full demo of the safe isolation procedure. That can be found in other videos on my channel. If I were to show this every time, people wouldn’t watch the video.

@Left_Unite 4 месяца назад

I thought it was bad to drill into the mortar?

@DonMorte2 5 месяцев назад

Bit of a misleading title there mate. Didn't have you pegged down for a clickbait kind of channel.

@TheDIYGuy1 5 месяцев назад

How so? I don’t clickbait. What would you have titled the video out of interest?

@DonMorte2 5 месяцев назад

@TheDIYGuy1 "How to replace outdoor socket - quickest and easiest way!" Or something along those lines. I feel the title implies you're installing a new socket from scratch.

@gordonm2821 5 месяцев назад

Great video but ‘Replacing an outside socket’ is nearer to what content is

@TheDIYGuy1 5 месяцев назад

Ok thanks for the feedback.

@onelineal9382 4 месяца назад

Did you not hear that he'd already fitted one,this was not click bait,this was showing you how to replace one already in situ,with a new and easier one to replace the old knackered one,look at his video on a full installation,then watch this one,please don't be so negative.

@alestout5632 5 месяцев назад

To be honest mate you just putting a new front box on 🤔

@jayshukla4926 5 месяцев назад

Good video but shame about the misleading title... You are not installing new one in this but merely replacing one.. I guess the algorithms are the king so whatever it takes to get this video in the feed..

@Jason.23. 5 месяцев назад

There's always one that has to complain

@darontrevascus3547 5 месяцев назад

I kinda agree was hoping for an install tutorial including wiring. But still thanks for the vid, great work as always

@nimmichagger165 5 месяцев назад

Misleading title..

@dandanthecryptoman5055 5 месяцев назад

Jayshukla- you old Scrooge

@sprint955st 5 месяцев назад

@@Jason.23.not really, you have to be qualified to install a new (not replacement) outside socket. The title doesn’t distinguish that this is replacing an existing which you can do even unqualified.

@keithpearson7539 5 месяцев назад

Totally misleading title. Merely replacing an existing socket is not installing (and wiring in and testing), a new one. Go away and try again.

@onelineal9382 4 месяца назад

Don't think you heard what he said, he'd already done a video on doing one from scratch,watch that, then watch this one, different property with one already fitted,the replacement socket was the main idea of this video,totally different from the the one being removed, don't be so negative in your remarks,he is a DIY guy trying to save your money.