How to install valley for a Metal Roof... Every cut in detail 

You literally just showed everyone what not to do!

Come on bro that valley is all Narfed up. Leak Fo Show.

Nice work, please kill the music it is very hard to hear the commentary sometimes. Thanks for the help

Can you remake video without that dam music

What's the purpose of the music right in the middle of the video that makes the person talking harder to hear?

Need to learn how to do detail work you have a good idea but need more training

Huh I wonder why my roof leaks

The whole thing will be covered with ridge cap, So why not cut and bend valley flashing up making tray at both ends of the valley. Cover both ends with rubberized membrane about 3-4 inches that 1 1/2 is in the bottom it climbs up the tray end that's bent up then wrap down and under use 6-8 inch strip that sealing each end both ends together. This whole seam will be covered by the ridge cap.

This is the worst valley install I've ever seen.. you have a huge at the bottom of the valley.. and it took that long?? You won't make out here in California with this hack bullshit.comin from a sheet metal/ metal roofer!

Thanks :) But the background music was hell.

Nice job. Them valley pans seem like a nightmare to work with.

Nice work. Ive watched a half dozen of videos on this and everyone does it different. Crazy

Nice but would like to have seen how you do the ridge cap also

26 g. Metal todo bien pero porque no remover los shingles y poner new felt paper el papel es la garantía que no filtrara agua en 10 años oh no ay garantía pero si buen trabajo. Aquí en Virginia no te permite la ciudad aser eso así

I swear man any freaking snips are a pain in the ass to cut through any roof metal lol!

Wtf. Ridge cap covers all this. That silicone though lol.

8:59 thaTS WAT SHE SAID !!! roflmao

I would not ever install a metal roof over shingles without at least applying an approved synthetic felt,regardless of the furring strips,it helps with condensation and also a proper way. Best if you remove shingles and not the lazy way cover up roofing method.

Gonna leak.

Good job amigo gracias por subir el video

Butchers..never would do any of this,this way

Cut the music so we can here his voice..

Has this dude ever been on a roof before?!? Lmfaoo!

After over 30 years roofing. And doing repairs on darn near every type of system. You can be sure of one thing. Everyone makes a mistake in roofing. Everyone. 1. Shingles bad cut in the valley 2. Metal not using proper sealant. Pop rivet or screw head washer. Bad detai. 3. Single ply. Cleaning laps. 4. Tile. Who needs nails after the first course . Or just use a board not water channels need cut into it. 5. Slate they will never see the crack. 6. Flat. Grab a glove full of putty and seal it up for the weekend. Now I see in Europe they install fiberglass roofs. I was watching a yt one day. A foreman is told work these new hires. Teach them. Hell they can not even speak English. Or put a battery in a screw gun I’m retired you are all doomed. Doomed doomed. Get back to work you have had enough water breaks today. Hurry up guys . It’s time to roll it up for the day. Have a good weekend and try to be on time Monday at 4:am It’s going to be 99 for the high on Monday 88 at 7 am. And we have a pitch and fiberglass tear off to do . Does this all sound familiar

Whats the best way to cut and install Garland metal system?

Thanks! We're doing this tomorrow. Every other video I've seen on this is eager to show the method of cutting around the facia/gutter side (which a 6th grader can do), but avoids the more complicated method of overlapping the flashing at the top. Most of them won't even point the camera in that direction!

I. Am a contractor and do a lot of metal .I have asked my self more than once what the need for that pain in but v in valley

I hope that isn’t in New England

I recommend buying a metal ruler that spans more than 18". Better than using a square to draw lines if your line needs to go far lol

looks like alot of pissing around

How many strips do you have under that valley? Just 1 along the outside or do you also run a stip on both side of the middle?

Es lámina de papel quisiera que tratara calibre 22 o ya de pérdida 24

How do you insulate a shed floor?

Eres mi campeon

Every home insurance requiere remove the shingles before install a roof metal is good!

5:31 fail... lol think asphalt shingles are way quicker and more sure..and safer..bit more heAVY tho

If you looking for offset snips go with mid-west. You will never go back to other brands and that’s a promise

When someone puts metal over shingles the party is over. I stop watching

Hack 101

Never trust an installer who works in shorts and slip ons! Unprofessional

Wrong!