How to Make a Ghost Shrimp Pump

Подписаться 88 тыс.

Просмотров 44 тыс.

50% 1

How to Make a Ghost Shrimp Pump:
For those of you that fish in the Area, or anywhere on the west coast, ghost shrimp can be one of the top baits for a variety of fish. From surfperch and striped bass in the surf to giant 100 pound sturgeon in the rivers, the possibilities are endless with a fresh ghost shrimp as your bait. Rather than buying ghost shrimp, catching them yourself can be infinitely more rewarding. In this video, I show how to make your own ghost shrimp pump. It is cheap, simple, and easy to make! Hope you enjoy! Please leave a comment below if you have any questions or have any requests for future videos.
Part 2 of the series, catching live ghost shrimp: • How To Catch Ghost Shrimp
Follow me on Instagram:
/ die.hard.fishing
Individual Components:
One 24" length of 2" diameter PVC Pipe
One 24" length of 3/4" diameter PVC Pipe
One 2" diameter Cap
One 3/4" diameter Cap
One 3/4" diamter "T" Connector
One 2" diameter Test Plug
One 1-5/8" Washer with a 3/8" Hole
PVC Cement
Camera Gear:
Gopro Session: amzn.to/2tCoqqK
Gopro hat clip: amzn.to/2ssQ6Ou
Gopro chest mount: amzn.to/2sdS8Og
Gopro tripod: amzn.to/2t4F9RN

Развлечения

Опубликовано:

22 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@coffeeismygod 3 года назад

This is a great how to! Thank you so much. I’m definitely making one and trying to catch a shrimp!

@EliteBassStickFishing 6 лет назад

Awesome how2!💯💪👊LET'S GO!!!

@surenbhola107 3 месяца назад

Awesome DIY presentation thanks a million 👌👍

@vaajrambo2053 6 лет назад

Awesome Can't wait to see how you hunt for Ghost Shrimp, signs and environment and stuff

@DieHardFishing 6 лет назад

Coming soon!

@nolimar86 6 лет назад

Very easy! Thank you!

@DieHardFishing 6 лет назад

Thanks for watching!

@JesseG085 2 года назад

What does it say about me that I had everything here to make this? 🤣 Awesome video, man! Thank you!

@MoreThanFishing 6 лет назад

Great job! Thanks, I’ll try make one for me

@DieHardFishing 6 лет назад

Sounds good!

@duanebrown3877 6 лет назад

Thanks for the upload. 😁

@DieHardFishing 6 лет назад

Thanks for watching!

@ryanberania1706 3 года назад

I'm not sure if this question is allowed bc I'm not sure if it refers to spot burning like fish or crab but I googled where to pump ghost shrimp and it showed a few beaches. I was wondering do you know if I can pump ghost shrimp from ocean beach or Pacifica?

@EG-fb1wc 6 лет назад

Great instructional video. I saw different versions where an exhaust hole / holes were drilled on top of the main tube so that it was easier to pull up on the handle . Waiting on the second installment. I'm curious about locations where you can find ghost shrimp.

@DieHardFishing 6 лет назад

I was thinking about doing that too. I might try this out and add that in later if I need to. Thanks!

@csufjeff 4 года назад

I used a larger suction gun for long neck clams. Vasoline works well for a lube and increases suction. great build. Thanks for sharing...New sub and hope to see you out there...Cheers Jeff

@DieHardFishing 4 года назад

Thanks for watching! Thanks for checking out the channel and subscribing!

@marshallchristmann2995 3 года назад

Wow thank you under 20 bucks just made mine 10 stars for you

@user-kk6lc1th2r 6 лет назад

Nice job there. Wish this video was around when I decided to pay too much 💰 got mine haha Looking forward to Part 2! There aren’t a lot of videos about pumping GS in the Bay Area, what to look for in a particular spot if you’re scouting aerial maps online, etc... Are you planning on targeting rockfish or other bottomfish with GS, or are you going after the usual suspects e.g. sturgeon, stripers, and bigger surfperch?

@BayandBeyondFishing 6 лет назад

I was about to buy one the other day for sturgeon! good thing I didn't since they didn't have any but I knew it would have costed me quite a bit. I'm definitely following this tutorial and making my own. @diehardfishing is this good enough for clamming also?

@user-kk6lc1th2r 6 лет назад

Yeah I definitely recommend following this to tutorial and making one at home! As for using it for clams, typically “clam guns” that you can buy at tackle shops are much bigger, have a larger opening at the bottom, and the handles aren’t designed to move and create suction. The suction comes from forcing it down into the wet, marshy or sandy ground, pulling it up and dumping the sand, then looking back into the hole to hopefully get better access to dig the clams out. The ghost shrimp pumps are designed to “pump” the shrimpies out of the dirt for you so you don’t have to go digging for them. So I don’t think the GS pump would work for clams-mayyyyyybe razor clams tho? No harm in bringing the pump along and trying it anyway as long as it doesn’t violate any kind of regulation 😉

@DieHardFishing 6 лет назад

Following what P said, I don't think the 2" PVC pipe is bog enough for clams. I assume you should be able to do something similar with a larger diameter pipe but I have never tried that. I am hoping to get on some big surfperch with these ghost shrimp and hopefully some sturgeon later down the line.

@HolySoopCoolers Месяц назад

“Scouting aerial maps” for ghost shrimp is wild

@georgeeast3160 3 года назад

Would love to try one of those, but don't get that plumbing suction device where I live. So I have to make use of a Coke bottle.

@jamespark1075 6 лет назад

Watched this on the toilet

@raulraffie4836 4 года назад

Me and you brother 😂

@darrenm9597 4 года назад

Was assembled on toillete

@rhiannonchiles3515 2 года назад

I’m UK based and I’m struggling to find the washer sizes? It’s a different measuring system and I cant seem to find them :/

@bowrudder899 5 лет назад

That's a wing nut.

@javierguzman1115 6 лет назад

Great video. A few questions. I went to HomeDepot and they don't see the "red' one you referenced. They showed be a similar one that is stainless steel both sides with the rubber in between. Will this work? You verbally stated the washer size as "1/2 to 2". The printed information you listed stated 1-5/8 washer with a 3/8 hole? Does the hole have to be 3/8? Thanks in advance for your reply

@DieHardFishing 6 лет назад

Yes that will work! And no the size of the inside hole on the washer does not matter.

@javierguzman1115 6 лет назад

ok, I've gathered all the parts and will assemble and try soon. Your 2nd video was helpful.

@DieHardFishing 6 лет назад

Glad it helped! Hope you get some good bait!

@javierguzman1115 6 лет назад

Ok, sheepishly I have to say it didn't work for me! A used the exact material so I've must have done someithing incorrect. I dug my tube into the sand, pulled up and the suction didn't pickup any sand. i tried tightening the screw more but it was already tight. Any suggestions? Has this worked for anyone? Any idea what I did wrong???

@DieHardFishing 6 лет назад

hmmm that is weird, is the rubber from the test plug touching the tube to create the suction?

@user-jc4yv7eg7c 5 месяцев назад

What’s a test plug?

@riverrat1149 6 лет назад

I still have one of those left over from early steelhead fishing days.Used it for sand shrimp.Lots of fun. I tried to email you this to keep it private but your link does not work for me. Abs pipe is black.PVC pipe is white.ABS pipe requires ABS cement.Pvc pipe requires PVC cement.To cement PVC to ABS requires transition cement.All the cements mentioned are not glue but solvents that melt the pipe together in a sense, You used ABS cement on everything.

@DieHardFishing 6 лет назад

Thanks for the heads up. I know nothing about pipes so that is good to know!