How to Make and Install a Shaker Style Range Hood Cabinet

Подписаться 17 тыс.

Просмотров 44 тыс.

50% 1

I made a shaker style range hood cabinet for my kitchen. The range hood turned out great and making it turned out to be the easy part. Installing the range hood meant dealing with HVAC ducting, which was a new experience for me. With lots of adapters (and patience) I got the range hood installed and it looks fantastic! Watch along to see how I did it and to learn how to make one for yourself!
Keep up with the latest projects here at Project Billd by:
- Following me on Instagram: / projectbilld
- Checking out my website: projectbilld.com/
- Subscribing to my channel: / @projectbilld
Resources:
FREE Plans: projectbilld.com/blog/range-h...
Edge Banding Guide: www.familyhandyman.com/projec...
Disclaimer: The following contains affiliate links. If you purchase a product through one of the links, I may receive a small commission (at no cost to you) that I can use to feed the platypus. And it’s always hungry.
Materials I Used:
(most products will be available at your local home improvement store)
Range Hood Fan Unit: amzn.to/3F731qI
Range Hood Liner: amzn.to/3E01r8x
3/4" Plywood
1/2" Plywood
13/16" Birch Edge Banding: amzn.to/3qJzRXI
1/4" Lattice Molding: www.lowes.com/pd/Lattice-Moul...
1x6 and 1x4 Boards (crown molding)
Coarse Thread Pocket Hole Screws (1 1/4", 1"): amzn.to/37SErdz
Cabinet Screws (2 3/4", 1 1/4")
Wood Screws (1 1/4")
Construction Screws (3")
Brad Nails (5/8", 1 1/4", 2")
Wood Glue: amzn.to/3r9mjW5
Wood Filler: amzn.to/2U7NnZK
Primer: amzn.to/3bT7qjZ
Semi-Gloss White Alkyd Paint: www.acehardware.com/departmen...
Lazy Susan Hardware: amzn.to/3EbJSmk
Double Sided Tape
Plastic Cable Clamp: amzn.to/3seOKEE
Power Cord: amzn.to/32bcYoz
Wire Caps
Wood Shims
Flexible Caulk
1/8" Tile Spacers
Spackle
Hinge Angle Restriction Clip (Note: Clips are hinge specific): amzn.to/3e0DUtS
Ducting:
7" to 6" Reducer: homedepot.sjv.io/x9OO5d
6" Backdraft Damper: amzn.to/3sePGJ6
6" Flexible Duct: amzn.to/3E2U4xd
6" Coupler: homedepot.sjv.io/5bKKZ9
Rectangular to 6" Duct Adapter: homedepot.sjv.io/GjEEVr
Foil Tape: amzn.to/3p5ZNyg
Sheet Metal Screws
Tools I Used:
(in order of appearance in the video)
Circular Saw: amzn.to/2NNRuGR
Clamping Straight Edge: amzn.to/3oI48oi
Quick Grip Bar Clamps: amzn.to/3gBjPKM
Table Saw: amzn.to/3qKvrjp
Table Saw Push Blocks: amzn.to/3gzddg1
Miter Saw: amzn.to/340NmbO
Measuring Tape: amzn.to/38gDVH6
Angle Finder: amzn.to/3yz1BTg
Pocket Hole Jig: amzn.to/340WOfu
Portable Drill: amzn.to/3qxstxH
Clothes Iron
Edge Banding Trimmer: amzn.to/374YFBZ
Woodworking Bar Clamps: www.harborfreight.com/36-in-a...
Impact Driver: amzn.to/3cp72LD
Angle Gauge: amzn.to/3yzjSQz
Brad Nailer: amzn.to/3j54wLK
Random Orbital Sander: amzn.to/35Uluam
Sanding Discs (150, 320 Grit): amzn.to/2W2PBak
Brayer Roller: amzn.to/3H9gik6
Putty Knife: amzn.to/3aprSbf
Centerpunch: amzn.to/3gBNBPM
Ratcheting Screwdriver: amzn.to/3E5tT95
Anti-Cut Gloves: amzn.to/3p2V2VW
Offset Snips (Right Cut and Left Cut): amzn.to/3E2HuOn
Level: amzn.to/3mYmSll
Laser Level: amzn.to/3m33DmZ
Countersinking Drill Bit: amzn.to/3yxpUBa
Utility Knife: amzn.to/33ZcT56
Caulk Gun: amzn.to/3umKBNA
Painting Tools:
Extra Soft Nylon Paint Brush
6" Foam Roller
Handy Roller Cup: amzn.to/3n7DnsX
Roller Cup Liners: amzn.to/3oGgptk
Paint Respirator: amzn.to/2IA1SzM
Compressor: www.lowes.com/pd/Kobalt-QUIET...
HLVP Spray Gun: amzn.to/301Y5nk
Non-Compressor HLVP Option: amzn.to/3EZ0Ip3
Air Hose: amzn.to/3ETWkri
Oil and Water Separator: amzn.to/3kkeZVF
Yellow Teflon Tape: amzn.to/3BTNE2x
Mixing Cup
Paint Strainer
- As an Amazon Associate I earn from qualifying purchases
Music:
www.epidemicsound.com/referra...
Chapters:
0:00 Intro
0:07 Design
0:48 Making the Range Hood Cabinet
6:22 Painting the Range Hood
7:26 Range Hood Installation
13:08 Finishing Touches and Crown Molding
14:47 Goodbye - SUBSCRIBE!

Хобби

Опубликовано:

7 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@archvizninja5823 2 года назад

This was great. I've been looking all over the place and yours is the only video to go through the entire process from start to finish. Thank you so much for sharing!

@ProjectBilld 2 года назад

Love to hear it!

@mikecassano8499 Год назад

One of the best DIY videos I have seen, Super helpful tips throughout!

@fruitpoops 2 года назад

The attention to detail...me likey

@madisongosney1473 Год назад

Thank you for making the plans free, this is exactly what I was looking for! Great video.

@ProjectBilld Год назад

You're welcome! And thanks

@johnkilby693 Год назад

Great video! You explain your steps very well. Learned a lot. Thanks.

@Gamepadsith 2 года назад

Very well done and explained.

@MoGhotbi 2 года назад

Very nice build. Great job explaining every step along the way.

@ProjectBilld 2 года назад

Thanks!

@pf5658 2 года назад

Fantastic job. I’ll be building one soon myself.

@TurboTylerIX 2 года назад

Awesome, video, thank you. I want to tackle this myself and this gives me the confidence to do it. Thanks for all the extra tidbits you threw in!

@ProjectBilld 2 года назад

Glad you enjoyed the video!

@downriverjordan 6 месяцев назад

I will definitely be using this as a guide! Thank-you so much for making this video, it's so helpful to include all the details from start to finish, and most importantly, the set-backs (like the caulked outdoor vent!). The main change I'll be making is making the large front angled piece moveable (on a hinge). I haven't sorted it out yet entirely, but I'm committed.

@ProjectBilld 6 месяцев назад

You're welcome! Making the front hinge able is a good idea and something I would change if I were to make another

@satieshisaac9114 Год назад

The mostt detailed video and link ever made, thx my friend

@ProjectBilld Год назад

You're welcome

@joefoxbody5914 2 года назад

That fastcap edgeband trimmer has saved my life many time 🤙

@ProjectBilld 2 года назад

For sure! It's a great tool and saves a lot of time

@larrycolon7320 11 месяцев назад

Awesome detailed video!! Thank you!!

@ProjectBilld 11 месяцев назад

You're welcome! Glad you enjoyed it

@sevoserver912 4 месяца назад

Thanks. Great looking hood. I’m going to attempt it.

@ProjectBilld 4 месяца назад

Awesome! Let me know if you have any questions

@dondking Год назад

Thanks for the design concept and excellent guidance in how to build this hood. I have mine underway. Even at $200 a sheet for Baltic birch, it sure beats $1,800 for a prefabricated unit. Advice on Broan insert and liner was especially helpful.

@ProjectBilld Год назад

You're welcome! Let me know if you have any questions as you build yours

@jdcooper9 5 месяцев назад

u deserve more subs your content is great!

@ProjectBilld 5 месяцев назад

Thanks! I appreciate that

@SOfilmable Год назад

You are a beast. You look young, so superbimpressive for someone who does not have 40 years of experience.

@ProjectBilld Год назад

Thanks! Feels like I learn new things in every project and those experiences quickly add up

@billm1651 4 месяца назад

Thanks for sharing. We are buying a house and I want to remove the microwave and install a vent. Either an under cabinet or an insert like you did. Finding video to make a wood range vent on youtube was harder than I though. One thing I noticed on stronger blowers like zephyr is they do not recommend flex duct but the ones im looking at are 750+CFM so that could be it. Thanks for making this video and not including the typical woodworker youtuber fluff.

@ProjectBilld 4 месяца назад

You're welcome! As some other viewers have pointed out, flexible duct is not advised as the ridges can collect grease over time and present a fire hazard. It makes sense and I wish it was something I had been aware of before installing mine, and if I were to do it again I'd figure out how to use a ridgid duct

@davidbryanwoodworksandmore Год назад

Very nice video. I’m building a hood for my own kitchen and as I normally build jobs for customers, making stuff for myself is harder. Finding the time but also decisions on design and such sometimes take longer when it’s for yourself. Lol. Anyways, thanks fir the video. I think it was very well done.

@ProjectBilld Год назад

I get that! I think making stuff for yourself, there's a level of detail and perfection that comes out because you are aware of every little imperfection that exists

@javierperez9484 2 года назад

Man you have talent, please tell me that your channel is new because you deserve much more views in your videos and so much more subscribers. Nicely done.

@ProjectBilld 2 года назад

Thank you. I've been making videos for about 2 years but only full time for the last year. As far as views and subscribers go, I try and self promote my content as much as possible but I don't have much control over how much exposure my videos get. Just going to keep making content that I'm proud of and I think the rest will fall into place eventually

@javierperez9484 2 года назад

@@ProjectBilld I'm sure that will happen, you have great content. Good vibes.

@skieye1 2 года назад

Nicely done. I wondered if that edge banding will stay secure when the own and range below are used for large meals like a Thanksgiving turkey or if the radiating heat will cause a failure. I like the look and the design.

@ProjectBilld 2 года назад

No problems so far. Edge banding glue melts around 400 degrees F so it should be fine

@skieye1 2 года назад

@@ProjectBilld Good to know. I do know that the top of our oven gets very hot when we have a big bird in the oven for many hours. I believe my dad used to apply edging with contact cement. This seems so much easier.

@ProjectBilld Год назад

A few people have commented and mentioned that the flexible exhaust vent I used is against code. I've looked it up and it does seem that is true. Code requires a smooth duct as the ridges in a flexible duct could potentially have grease build up over time and catch fire. While I don't think this is a huge concern, I can't recommend using the flexible duct anymore. What I don't understand is how one is supposed to seal the duct at the range hood if a smooth rigid duct is used. If anyone knows and can provide some insight on how to lift a range hood in place and seal it with a rigid duct it would be greatly appreciated.

@jessed1311 Год назад

we either make our hoods with a removable front access panel, or we make them 3 sided (no back) in that scenario the hood is actually installed first, sitting on cleats left and right, then the hood slides over the front of it and it screwed in through the sides of the cabinets and on a hanger strip up top if there is a crown going up that will hide the gap needed to reach the it with a drill and extension

@ProjectBilld Год назад

Ok that makes sense. Appreciate the insight!

@maxearth321 Год назад

Nice video, but by reducing your exhaust from 7" to 6", you reduced your CFM by at least 35% and likely somewhere between 50-70%.

@MAGAMAN Год назад

He should have go up to 8 inches instead. That being said, it's probably still more than enough if he used the proper ducting instead of the flexible dryer stuff.

@ralphdicecca2889 Год назад

Nice jog, quick question. Do you think this would work over the top of a under cabinet microwave. The cabinets above the microwave are useless

@ProjectBilld Год назад

You could certainly modify it to make it fit up there but I'm not sure how it would look. There used to be a microwave above my stove but I moved it because I didn't like the look

@waynegomillion4976 Год назад

Nice. What's the ceiling height?

@ProjectBilld Год назад

9ft

@keithstone4953 2 года назад

You edge banded the bottoms of the ranger hood vs using drywall compound like on the upper cabinet doors. Did you find that the compound wasn't as durable?

@ProjectBilld 2 года назад

Yeah I'm not sure I like it yet. I've only used the drywall compound on the shelves inside the upper cabinets so far. It's soft and shrinks a lot when drying and I had a small chip in an edge of one of the shelves so I'm going to keep looking for something better to use. Wood filler comes to mind but is too thick to be a good option imo. I would certainly like to find something better than edge banding long term

@keithstone4953 2 года назад

@@ProjectBilld I wonder if something like a 10 minute hot mud would work better. Its my understanding that that stuff dries harder than an all-purpose mud. Have you had any issue with the banding peeling? I had tape on a drawer edge pop up on me. Not sure if I rushed putting it on or if thats a preview of whats to come in a year or two

@ProjectBilld 2 года назад

Yeah that's likely in the direction of what I'll be trying next. All the edge banding I've put on in the kitchen (and elsewhere) is holding to this point. I have a tv cabinet I made 8 years ago and that edge banding is still fine. I've found that it either detaches in the first few hours/days or not at all, but the fact that it could detach is what makes me look for alternatives

@joshuasteele1769 7 месяцев назад

Awesome video! Not going to lie I’m totally stealing your design for a kitchen remodel for a client. It’s a shaker kitchen and that range hood will fit in seamlessly. I do have one question and you may have mentioned this already but I don’t see any visible controls on the range hood. Do you have to reach under to turn on the fan and light? If so, is there another design element that could be added to where you can access the controls from the front? Thanks for the video it was a lot of fun to watch!

@ProjectBilld 7 месяцев назад

Yeah I have to reach up under to get to the controls. It is a bit annoying. I think you'd have to look for a different range hood insert if you wanted controls located elsewhere

@sidraju3251 Год назад

This flexible duct is not recommended for rangehood exhaust as per code.. May cause oil and soot pile up, then later fire issues.

@williammchale6739 Год назад

Where can I get a liner and fan?

@ProjectBilld Год назад

The ones I used are linked in the video description. Let me know if you have any issues finding them

@user-ne3ym8ll2l Год назад

Hello sir i want to start woodworking can you help me with kitchen plans please

@ProjectBilld Год назад

Feel free to ask questions you may have, though if you're new to woodworking I'd recommend starting with a smaller project than a kitchen

@itsjieyang 2 года назад

whaaaat why would anyone caulk the exhaust port closed

@ProjectBilld 2 года назад

Beats me. It had been painted over so I'm guessing the house was repainted at some point before I bought it. Otherwise it was the original paint job... And that's even worse ha

@MrJramirex Год назад

The previous owners were probably tired of hearing it clunk during windy days due to back pressure. My previous house had that issue, I didn't caulk the vents shut, but I would be lying if I said that never crossed my mind.

@ProjectBilld Год назад

Hasn't been an issue since I've opened it up. Previous owners didn't take care of this house at all so I can't even begin to guess why it was done

@MAGAMAN Год назад

That flexible ducting is against code. If this causes a fire, your insurance company will laugh at you when you try to get them to pay for the damages.