How to make smallest Electromagnetic Train in a wire coil 

DameAndThatGam

DameAndThatGame p

Michael Skelly

Michael Skelly

How did u do it.plese tell me.my was didn't working. Please tell plese

Sharddha Chaudhari maybe you're battery wasn't charged?

Shrinivash Murugesh It gets larger with speed.. I thought the Hyperloop was all about speed..

Hyperloop is doomed to failure. A vacuum tube as large as hyperloop is an accident waiting to happen.

No, that would be incredibly inefficient.and expensive.

+MCommandguy no

+MCommandguy this is a thing we're designing now

there are lots of nonferous materials in world which aren't expensive

sir may i know the phenomenon behind it

it depends on wire gauge and finished coil diameter, lets say you will use 18AWG wire (thats about 1mm thick) and you will use 5/8" (16mm) diameter rod or pipe to wind and make the coil. Calculating Circumference of single 16mm coil: C= π x 16 C= 3.14 x 16mm C= 50mm So 1 running millimeter of coil will need 50mm of wire 1 meter (1000mm) of coil will need 50 000mm (50 meters) of wire. So this is just rough calculation, also you will need to stretch the coil to make sure coils in between has space and they don't touching each other, so you could double the length then you will need half or that 50 meter wire , ( I would say 25 meters of copper wire would be plenty for 1 meter of finished coil)

Monty4s thx a lot

make sure you follow instructions, what kind wire did you use?

18 gauge copper wire

18 gauge copper wire

the wire 18 AWG is good, copper wire is the best, make sure its uncoated

I guess it should also be a magnetic copper wire not just a regular one.

make sure you have all correct parts as in the description of the video

Yes sir I HAVE DONE SAME THING TRAIN IS WORKING BUT SLOW

Not only slow but verry slow please guide me

if its slow, most likely is the wire (coil wire) is to thick, or could be the magnets too weak

Thanks for your help now my project is working thanks again

use uncoated copper wires

did it work later???

try removing the copper wire skin by rubbing scissors with it

+B Prakash probably LED strip lights and extra battery would do it, we had done same on this project, just hard to see in the video

+JBV 3737 I never tried it to run that much, but it last pretty long

John Williams Exactly! And in the future there might be real Hyperloop line from LA to Vegas

Xiaoke Ding fun fact hyperloop is cancelled it is in efficient and dangerous

+panda gaming44 fun fact too that in Jakarta Indonesia will be built thta hyperloop