How To: OLS ATC/ATO LED Illuminated Fuse Box Usage & Installation (PSZACCEPS051H/PSZACCEPS052H) 

Thank You !!! That was an excellent Presentation. My only suggestion would be to discuss why the unit should be next to the battery and why there is only a positive going to the unit and if so does the ground come from the device you are powering up as it would indicate on the diagram , which very clear but i want to be confident with how that is achieved. Thank' You Again, Randy Chavez

I have 2, 6 way led bladed circuit boxes one for the positive and the other for the negative, I use mine for my Harley Davidson and connected the power to my fuse box so when the bike is off everything stays off and the negative connects to the battery for ground it deletes access wiring to the battery direct terminals keeps it clean also I Velcro taped the boxes to side battery cover latter I will make a bracket for them. I connected a radio with amp. also a voltage meter for my batteries power levels and some front driving lights with on/off switch.

This doesn't really explain anything. Where do the ground wires go? And why are all the positive looking wires going to the fuse block? Please explain.

I also was thinking to use a toggle switch to power the circuit box instead of the fuse box, then I can control the on and off. So the switch will connect to the battery positive to the circuit box and the other circuit box will connect to the batteries negative for ground only thing making sure the switch is turned off or the battery will drain, a sure way is to connect to my fuse box either way they both work great.

No ground? Or did I miss something?

Found out, using a 3,4,6,8,12 Positioning cover screw Terminal for the ground instead of the fuse box for ground.

sorry but im a little confused so if your attaching the live from the battery to the fuse box what about the negative??

Can this be used to replace a fuse box in a classic car? My 1963 Cadillac uses older style glass fuses.. I wanted to update it

Hello I want to install some leds to my car and I want to controll the on and off function from car's original headlight switcer. How about taking current (+12 V DC) from a headlight socket of the original fuse box (using a tap fuse holder) and drive it to the positive terminal of the auxiliary fuse box instead of using the battery for that purpose? If I connect the positive terminal of the auxiliary fuse directly to the battery I will not have this capability. Is it safe to do it with this way and will I face any problem in the future If I want to connect more devices to the auxiliary fuse box? Thanks in advance!

Do you need to fuse the wire going from the battery to the new fuse block?

I'm loving how this dude made a "pilot hole" with the exact self taper he was going to use anyways.

Where's Barbie ken? "She's as dizzy as a daisy and blowing the other fuses, OWHA FECK... YEAH!"

Where do the relays go for the accessories ?

Where did you connect the negative feed from the led light bar? Into the battery negative terminal or the ground frame of the vehicle?

Where do you hook up the negative line

No cleare for me,,,I couldn’t see others cables ,

we make fuse and fuseholder for car .

If im doing a water crossing and this stuff gets submerged will it ruin my electrical system?

Well, this is half-assed. He shows the positive side of the connection but totally ignores the negative. Basically your battery needs to be grounded to the chassis and each individual thing you run from this block also needs to be grounded to the same.

what gauge wire and fuse to use from the battery to device and how do you set it up to only be on then the car is on? i am planning on installing cameras, monitors, led lights and couple engine monitoring devices in my car

Can this be used for negative terminals instead of power?

Who's the SBCO pogue that owns this?

Can I use all 6 fuse sockets with 10Amp fuse or each of the socket is dedicated to certain predefined amp value?

'Short' or a 'grounded' circuit.

can I use this to replace old glass fuse box in my 1963 Pontiac

Dude you said nothing about the negative connection or the fact that you always disconnect the negative black side and always reconnect the black negative side first and red positive side last ..second.

Should you be using a relay for those aftermarket LEDs?

Do you think I could use this fuse box as power distributor for my 12v solar off grid cabin.

Now my question is, is if I have two lamphus maverix lights in the rear of my truck, with your wiring harness, plus two 6 LED light head strobes, a mini light bar, and a dash light, what size fuse box would you recommend?

My fuze box old as a uncle fucca

Clean the battery

Yea dude do your video over and show people how you did the ground geez

Was this a high school project video? This is one of the worst product videos I have ever seen. The dude moves around way too much, pointing, jerking his head around. I felt like I was watching the reincarnation of Rodney Dangerfield. And what was with the sudden shot of loud music when you were drilling? Then it abruptly stops. Lol I could go on and on. Please, let professionals help you.

you waste time on useless stuff and never show how to hook it to the battery, explain that instead of how to mark holes to drill

wouldn't you want a fuse between the battery and the fuse boxes power input? also I'd like to wire up mine so it only has power when the ignition is on. how would I do that?