Тёмный

How To: Prepare the body of your scale model before paint 

The Scalemodeling Channel
Подписаться 239 тыс.
Просмотров 343 тыс.
50% 1

Visit my Webshop for lots of the tools paints and other products used in the video!
✖www.thescalemodelingchannel.com/
Other useful links to products i use are further bellow
✖ Want to support the channel, become a channel member or Patron!:
/ @thescalemodelingchannel
www.patreon.com/thescalemodel...
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
2 Bar(28PSI) 0.5mm needle
Mr Hobby Ps-290 Airbrush:
amzn.to/3v4Gt56
Grip for PS-290:
amzn.to/3uWiqFH
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
shorturl.at/gvDV1
amzn.to/2yp5T25
Number 5 Paint:
shorturl.at/ktAT4
Streetblisters Paint:
shorturl.at/hsMVY
General Tools:
shorturl.at/szCQ4
amzn.to/3lAT4ZJ
amzn.to/2xGdDOB
Sanding sticks:
amzn.to/3cVCCPJ
amzn.to/2l1FWOV
Tape:
shorturl.at/bnsJ7
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
amzn.to/3cXgowQ
amzn.to/3c8MmXL
amzn.to/3f4uM8X
amzn.to/3r8sTL3
Tape with plastic sheet: amzn.to/3c8MKWj
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Flush Cut Pliers: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Glue:
shorturl.at/nFOUW
amzn.to/2Pgofx4
amzn.to/2NFHgsD
amzn.to/2zb0jhg
amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves: amzn.to/394jFcv
Tweezer:
shorturl.at/bfyLS
amzn.to/2hIxj9F
Brushes:
shorturl.at/kmyI6
amzn.to/2xG77r3
Decals Solutions:
shorturl.at/quzQ3
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
shorturl.at/xVX19
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers:
amzn.to/2zptYoa
amzn.to/2z8WREd
amzn.to/2zFEgjS
Sanding & Polishing supplies:
shorturl.at/dftxN
amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders:
amzn.to/3c6HDpi
amzn.to/3f2GbGD
Panelline accent color:
shorturl.at/fuNS9
amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice:
www.thescalemodelingchannel.c...
www.thescalemodelingchannel.c...
amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by RU-vid Audio Library
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

Авто/Мото

Опубликовано:

 

9 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 282   
@Shane-Singleton
@Shane-Singleton 9 лет назад
Something i'd like to add that I have found to be probably the most valuable tip when trying paint combos to see if they play nice. test it out on a plastic spoon. I picked up a box I think of 50 of them and it was only ~$3. Or if you eat a lot of fast food usually you can just toss 1 or 2 in the bag with your order. That way you're not messing up a $20 or more model kit that you probably already have time invested in with other parts.
@JoeKrol
@JoeKrol 6 лет назад
You can get them in the us at the dollar store for, well a dollar.
@ChrisFredriksson
@ChrisFredriksson 7 лет назад
Beautiful video with lots of useful tips! =D
@miguelmigkustomz9010
@miguelmigkustomz9010 9 лет назад
Awesome work man! Thanks for all the amazing tips!
@brainjuice4381
@brainjuice4381 4 года назад
Thanks!! Your works are my modeling bible.
@MuscleCarModeler
@MuscleCarModeler 8 лет назад
Great tips, we can all learn from each other and I have learned lots from your vids. Thanks for sharing. Be Blessed Sis! Danny
@sbvwfanatic
@sbvwfanatic 9 лет назад
Nice. I'm going to be starting this very kit soon.
@sclarebout
@sclarebout 8 лет назад
This is dope! Thx for sharing!
@pturley84
@pturley84 9 лет назад
Great Tips! Never thought about using a permanent marker to highlight all the mold lines.
@miatageekscott
@miatageekscott 9 лет назад
Another thing you might try is powdered carbon on top of primer for sanding mold lines, I work in a body shop and we use a dry guide coat, it goes on top of the primer when it's dry and when you sand you can see where all the imperfections are and where you have sanded....
@Toppervision1
@Toppervision1 9 лет назад
Great ideas here. Never thought to use the scrubbing pad.
@miatageekscott
@miatageekscott 9 лет назад
I use Duplicolor scratch filling primer/sealer, works great and is compatible with almost all color coats, from Duplicolor, to Krylon Fusion...Then I use Tamiya clear for the clear LOL
@bluegrasscrazy7307
@bluegrasscrazy7307 5 лет назад
How do you clean your models before priming..Thx...
@GUNPLABUILD_2024
@GUNPLABUILD_2024 2 года назад
Amazing!👍👍👍🤩
@fordman1956
@fordman1956 9 лет назад
Great information , Brother. Very helpful........JIM
@MrModelworx
@MrModelworx 9 лет назад
great video and very informative, I'm having major problems at the moment with paint flaking off at the sharp edges of the model car body, the paint chips off down to the bare plastic takes the primer and everything with it. will using the scotch pad all over cure this ? does it give the primer something to bite into. I'm using duplicolour primer and top coat they are acrylic based sprays. thanks
@TheScalemodelingChannel
@TheScalemodelingChannel 9 лет назад
+gaztheK Scotch or sanding paper will scuff up the surface and therefore indeed giving the primer something to grab on to. if the surface is unprepared its to slippery and the paint could fall straight off like what you explained.
@DjOrs96
@DjOrs96 6 лет назад
Hey! Love your work man inspired me to start again. Do you like Alclad primer and clear? I live in australia and dont have too many options. And also can I decant tamiya spray primer to use in my airbrush? Thanks :)
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
You can do that, yes. However i would just use the can for primer if you already have it
@salmondafish3963
@salmondafish3963 3 года назад
What should the texture of the plastic be after sanding? Should it be a little rough or smooth?
@verve78arief
@verve78arief 4 года назад
Hi nice tutor... n why plastic primer get melt or wringkle my plastic model kit? Whats wrong.. thanks
@lucaabsmann379
@lucaabsmann379 5 лет назад
Wich size of airbrush to you take ?
@Stickybutton
@Stickybutton 6 лет назад
Would like to order stuff from your web shop but you still don't ship to Singapore. :(
@jamesprice647
@jamesprice647 6 лет назад
Thank You, I Gut got through scuffing a airplane model and I like your indentation scraping deal. Anyhow, what you you use to do your final clean before laying down Paint.? Respectfully, Jim P. Jenuine-Motor
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
James Price a tack cloth. Or just high pressure air
@PennyBenjaminTG
@PennyBenjaminTG 4 года назад
Do you still use scotch brite pads?
@wayfarer198
@wayfarer198 6 лет назад
Your videos are very informative thank you. Do you prime all the small parts engine etc or just the larger ones body /chassis?
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
Wayfarer every part that gets painted with the airbrush, gets primer, except clear parts
@wayfarer198
@wayfarer198 6 лет назад
The Scalemodeling Channel OK thanks
@jasonmorrell2770
@jasonmorrell2770 3 года назад
Is there a conversion chart for fine grade P???? Sandpaper to the American grades?
@mikebreazeale2563
@mikebreazeale2563 9 лет назад
Great music!
@kylemay6043
@kylemay6043 7 лет назад
Do you have any recommendations for knowing when in the building process to paint different parts? Obviously every model is different, but it seems easy to paint too early, or too late.
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
+Kyle May i personaly assemble everything i can before painting. And then just paint all the parts and finish the assembly
@SickMoover
@SickMoover 6 лет назад
I love this Caaar! Its weird, but this is my dreamcar. not a lamborghini or something high end car.
@Mao_tse_tung
@Mao_tse_tung Год назад
I appreciate your choice of music
@jslute
@jslute 3 года назад
Has anything changed in the way you prep since you made this tutorial?
@ed-varner8472
@ed-varner8472 3 года назад
Is this a revell? I’m doing the same one now but want better wheels for it n can’t find any to fit any tips for me?
@jslute
@jslute 5 лет назад
You showed a bottle Tamiya surface primer at 7:23.Any idea how i would thin it for airbrush? I do agree with you it is a fantasic primer but where i live it $15 a can.
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
You can buy small bottles of it aswell from tamiya. Or decant it
@bobyoung1698
@bobyoung1698 3 года назад
Thanks for Strauss!
@JoeKrol
@JoeKrol 6 лет назад
What kind of treatment do you give to the inside of the car for the door panel detail? Do you scotchbrite that too or just prime it?
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
If i am only painting it in 1 color with the airbrush(no masking tape etc) just primer. If i plan to do more then one color(with masking tape etc) i scuff it up with some sandpaper or scotchbrite.
@flightofsight4343
@flightofsight4343 2 года назад
Nice! can the same method be applied to model airliners like the 1/200 Hasegawa Boeing 777?
@TheScalemodelingChannel
@TheScalemodelingChannel 2 года назад
Yes
@LordRusty5
@LordRusty5 3 года назад
Colors and primers from "Gravity Colors USA" - made for model cars - are terrific!
@ParkAvenue287
@ParkAvenue287 9 лет назад
Awesome video! Thank you. But I think you forgot to put the link of the sanding sticks in the description?
@TheScalemodelingChannel
@TheScalemodelingChannel 9 лет назад
ParkAvenue287 That indeed is correct :P My bad.. modelbrouwers.nl/winkel/schuren-en-polijsten/vijlen/vijlenset-fijn-grit-240-320-3mm-12-stuks
@birdy369
@birdy369 7 лет назад
should I wet sand or dry sand? I remember reading or seeing somewhere about wet sanding... and any tips on how to use little sheets of sandpaper more... ergonomically friendly? easier to handle? I've thought of wrapping them around something but I'm not sure what that something should be yet lol
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
wetsandings gives a big mess, i preffer dry sanding.
@dietko
@dietko 3 года назад
Hi can u please directly send me the link the scotch brite pads please since I can't find the link in the description. Great job btw!
@TasosX
@TasosX Год назад
Hello friend. Amazing work. You know what kind of plastic is the body shell?
@TheScalemodelingChannel
@TheScalemodelingChannel Год назад
Styreen
@willieobermann1528
@willieobermann1528 6 лет назад
I would like to purchase sanding sticks.
@keithsmodelsandrcs6593
@keithsmodelsandrcs6593 Год назад
iv found i leave alot scratches from sanding body b4 paint with 600grit tamiya sponge any advice on how to avoid it or should I use 800 to 1000 instead?, thanks in advance ,👍
@TheScalemodelingChannel
@TheScalemodelingChannel Год назад
If 600 leaves to much scratches for you, try 800
@jorgeguerrerotoledo
@jorgeguerrerotoledo 5 лет назад
After sanding, scribing and roughing up the surface of the body, how do you clean up any residue (plastic dust and other particles) before priming?
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
Whash it, or dust it off with high pressure air
@jorgeguerrerotoledo
@jorgeguerrerotoledo 5 лет назад
@@TheScalemodelingChannel thanks
@Erilis000
@Erilis000 7 лет назад
Thanks for the video dude. I'm new to modeling and this helps a lot. What kind of set up is that you're working in though? Where did you get that metal box or what is it called? Thank you.
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
What do you mean with metal box?
@Reidy82
@Reidy82 7 лет назад
Possibly means the spray booth..?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
well, that is a sparmax booth, but is plastic:P
@birdy369
@birdy369 7 лет назад
or is it the stand he's referring to? it's made by tamiya... I THINK, and that's all I know!
@randallsaunders8927
@randallsaunders8927 8 лет назад
What is the psi setting for the airbrush?
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
35psi
@davidjakubiak336
@davidjakubiak336 Год назад
I’m new to this. Do you need to sand the entire body, or just certain areas? What about smaller parts?
@TheScalemodelingChannel
@TheScalemodelingChannel Год назад
Yes. The entire body. Only parts that you want to mask and paint in multiple colors
@raGEEE1986
@raGEEE1986 8 лет назад
Just a question , could you use tamiya x/xf pots airbrushed over vallejo air grey primer ?
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
I think that should be fine, as far as i know they are both acrylic.
@StevenReyBargamento
@StevenReyBargamento 2 года назад
Quick question. Do I need to primer every piece of a car model kit or just the body?
@TheScalemodelingChannel
@TheScalemodelingChannel 2 года назад
In general it is best practise to prime all of the parts you are going to paint
@steveschilbe8165
@steveschilbe8165 2 года назад
Which Scotch Brite pads do you use? There seems to be a huge variety of them available. Thanks!
@TheScalemodelingChannel
@TheScalemodelingChannel 2 года назад
After this video i stopped using them. They are very inconsistent. I now just use 600 grot sandpaper
@steveschilbe8165
@steveschilbe8165 2 года назад
@@TheScalemodelingChannel thank you for this info as well as the plethora of info you provide us all through your videos!
@muhamadfaisal5170
@muhamadfaisal5170 6 лет назад
what's the differences between using sanding stick and sandpaper? do you use the same grit? how about using sandpaper only without sanding stick? thanks for your tips anyway..
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
+Bigfai Channel a sanding stick is rigid. Wich makes it easier to just touch the high spots. Sanpaper can create low spots arround the high spot. The same grit aplies
@muhamadfaisal5170
@muhamadfaisal5170 6 лет назад
The Scalemodeling Channel thanks for the answer..
@joevrabel7374
@joevrabel7374 3 года назад
Why do you have to sand the raised edges off?
@joshdunn101
@joshdunn101 7 лет назад
what grit sand paper should I use to sand the lines?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
400 or 600
@Serika17
@Serika17 6 лет назад
Hi! What is that thing you use to mount the kits while painting? I've seen it on several of your videos but have yet to come across a description on it. I'm a big fan of your builds btw! Cheers!
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
Tamiya spray stand
@Serika17
@Serika17 6 лет назад
The Scalemodeling Channel thanks for the reply!
@napadaanlng69
@napadaanlng69 8 лет назад
1.) what is the best grit of sandpaper to smooth plastic kits before applying primer? 2.) Do i have to necessarily sand the plastic kit after i apply the primer or is it just fine to go straight with the paint?
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
6 or 800 no its optional but it does inprove the end result(less orange peel)
@napadaanlng69
@napadaanlng69 8 лет назад
you have the most greatest videos about scale modelling. thanks
@Mehboobmehbooba12
@Mehboobmehbooba12 6 лет назад
great
@upendoluv3605
@upendoluv3605 4 года назад
what grits did you use to remove the black in?
@TheScalemodelingChannel
@TheScalemodelingChannel 4 года назад
600
@Skaters1517
@Skaters1517 7 лет назад
What sandpaper did you use (number wise) to sand the body after using the sanding sticks?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
Skaters1517 600
@Chappy31x
@Chappy31x 3 года назад
Do you have a video of your paint booth set-up?
@TheScalemodelingChannel
@TheScalemodelingChannel 3 года назад
A Spray booth i recommend: amzn.to/2yp5T25 The booth i made myself: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ezPDyMA9Q40.html
@mr.joshua204
@mr.joshua204 6 лет назад
What's the name of that spinning holder thing that you are using to hold the body
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
Tamiya spray stand
@dougwarren2992
@dougwarren2992 3 года назад
Hi, In the process of painting my 1/18 scale model. I have removed all existing paint so I am back to bare metal. I had some side moldings on the doors and front and rear sides, which I have removed using an electric sander. My question to you is can I go ahead and spray primer or should I go over the car with a 600 grade sandpaper as you have in this video? I ask this as your model appears to still have paint on it.
@TheScalemodelingChannel
@TheScalemodelingChannel 3 года назад
My models is plastic. Before you apply primer, always sand. This is the way the primer can “grab” on to the body/parts
@dougwarren2992
@dougwarren2992 3 года назад
Thanks for the advice. What grade sandpaper do you suggest for my metal body?
@TheScalemodelingChannel
@TheScalemodelingChannel 3 года назад
400 or 600
@Dillusionz
@Dillusionz 7 лет назад
what grid sandpaper u use to remove the mold lines.
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
Daryl Chew 600
@buwaya5704
@buwaya5704 8 лет назад
can i use epoxy primer with catalyst with lacquer thinner on scale model?
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
I think you can is if is sutable for plastic, though i have never used it before.
@buwaya5704
@buwaya5704 8 лет назад
thanks
@NeonsStyleHD
@NeonsStyleHD 6 лет назад
Do you sand the entire model before painting or just the mold lines? Also, I'm having problems sanding with 1200 sand paper it just takes the paint off my test piece I'm using to learn how to do this.
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
I do sand the entire body Then either the primer is not thick enough or you are sanding to much
@NeonsStyleHD
@NeonsStyleHD 6 лет назад
Thank you.
@alexoliver5649
@alexoliver5649 7 лет назад
Is it possible to airbrush the tamiya primer?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
yes
@dominicb3449
@dominicb3449 8 лет назад
hey im going to build a enzo ferrari any tips or trixs and it a revell kit
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
Go for it and give it your all
@dominicb3449
@dominicb3449 8 лет назад
ok thx also im 14 teen lol if your wondering
@eldiablo7024
@eldiablo7024 5 лет назад
Do you just use a normal permanent marking pen to mark out the mould lines?
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
Yes
@eldiablo7024
@eldiablo7024 5 лет назад
Thanks
@ruggeda55
@ruggeda55 4 года назад
Where can I buy that body holder you're using? Is that homemade?
@TheScalemodelingChannel
@TheScalemodelingChannel 4 года назад
i have links in the description.
@wayneoh7710
@wayneoh7710 7 лет назад
Excellent video and tips!! May i know what is the purpose of the primer?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
It helps the paint stick better and remove tiny imperfections or scratches in the plastic.
@wayneoh7710
@wayneoh7710 7 лет назад
The Scalemodeling Channel thanks for the quick clarification, so if i want my model to be white, can i just use a white primer without white paint?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
wayne oh if that is the shade of white you want and the finish you want to have your model in. Sure
@wayneoh7710
@wayneoh7710 7 лет назад
That is great!! Thank you very much for the tips. Appreciate it
@TheMrrobbie1997
@TheMrrobbie1997 7 лет назад
Do you have any experience with revell airbrush kit wich you plug into the wall?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
Jazeker. Die zijn ontzettend slecht. Je kan beter even door sparen voor bijvoorbeeld een harder en steenbeck
@TheMrrobbie1997
@TheMrrobbie1997 7 лет назад
The Scalemodeling Channel Het is juist dat ik nog maar net begonnen ben en niet weet of ik het kan/leuk vindt. Dus om er 200 euro in te steken en er dan achter te komen dat ik het niks vindt zou kak zijn :) Wat raad je aan voor mensen met een budget? Een beginners set
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
Om het te proberen zou ik even aankloppen bij airbrushservice almere. ze hebben daar van laag tot hoog en weten je perfect te adviseren ;)
@diegomiranda853
@diegomiranda853 8 лет назад
Im new to scale modeling so what's that part that's holding the model car body while it was getting painted
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
Tamiya paint stand
@Maty-fisherman
@Maty-fisherman Год назад
where did you get the stand from? please
@TheScalemodelingChannel
@TheScalemodelingChannel Год назад
Tamiya spray stand
@billgoodnu
@billgoodnu 5 лет назад
Do you wipe the body or for that matter any parts with anything prior to painting, with alcohol, mineral spirits etc.?
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
I don’t
@Ymaximm
@Ymaximm 5 лет назад
Hi, on what pressure you applying primer, painting?
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
1,4
@Ymaximm
@Ymaximm 5 лет назад
The Scalemodeling Channel tnx
@WayneModz
@WayneModz 7 лет назад
where can i buy this kit
@johnoliver2442
@johnoliver2442 5 лет назад
Hobby lobby
@IvanIdsinga
@IvanIdsinga 8 лет назад
Hi! Cool video's. Volgens mij ben je Nederlands toch? Hoe kom je aan de standaard die je gebruikt om de modellen op te klemmen? Alvast bedankt en mvg, Ivan
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
+Ivan Idsinga Dit is een Tamiya Spray stand
@IvanIdsinga
@IvanIdsinga 8 лет назад
+The Scalemodeling Channel Thanks!!
@jamesadams661
@jamesadams661 5 лет назад
Do you need to sand or use micro mesh on the body work after the coats of primer?
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
That depends on how smooth the primer is. It can’t hurt though to smoothen it out with 2000 grit
@jamesadams661
@jamesadams661 5 лет назад
@@TheScalemodelingChannel was planning on using zero paints primer w/ airbursh. Just give it a light sanding?
@TheScalemodelingChannel
@TheScalemodelingChannel 5 лет назад
James Adams jup
@ss-ky1vl
@ss-ky1vl 7 лет назад
where do you get these kits? I want a replica of my cobra and civic
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
Ebay is the place to go ;)
@ihateliberals518
@ihateliberals518 8 лет назад
what's the reason for the permanent marker? is it like a guide coat, to make sure it's sanded flat?
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
Exactly as you said it, its a guide coat
@ihateliberals518
@ihateliberals518 8 лет назад
The Scalemodeling Channel any tips for painting with lacquer(nail polish) with an air brush? I've always painted with enamel rattle cans. I've been told you mix it with a medium heat thinner at 2:1. is that right?(2 parts paint to 1 part thinner)
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
+gary williams sorry man, no clue. I've never worked with naul polish before. Though just like any other paint: when thinning for airbrush use, i go for a milk thickness
@MiguelJimenez-yn1tg
@MiguelJimenez-yn1tg 5 лет назад
can you please tell me what song you played during the video, Thanks!!
@davidthompson6834
@davidthompson6834 4 года назад
It’s called the beautiful Danube
@davidthompson6834
@davidthompson6834 4 года назад
Strauss
@lachyl7107
@lachyl7107 2 года назад
Do you wash the parts your painting before painting g
@TheScalemodelingChannel
@TheScalemodelingChannel 2 года назад
I personally never have
@williamsantiago7303
@williamsantiago7303 6 лет назад
By using the black marker does that let you find ruff spots on the edges? Is that the reason for the marker? Great video and VERY INFORMATIVE buddy. Keep up the good work. Thumbs up bud.
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
+William Santiago yes
@billysayers7941
@billysayers7941 2 года назад
What colour primer could I use for Gray?
@TheScalemodelingChannel
@TheScalemodelingChannel 2 года назад
Grey
@billysayers7941
@billysayers7941 2 года назад
Ok thanks
@stemoleum
@stemoleum 6 лет назад
I did a very bad paint job on my 911 (i'm on my 4th model build now). Is it possible to remove all the paint using thinner? I already gave it a try but it takes so long to remove as I had 4-5 coats and I'm thinking of dipping the whole body in thinner or just buy the kit again but I already invested a lot of time in it. your input is greatly appreciated and your work is very meticulous and above all I like your voice and accent as it's very clear and easy to understand. Cheers from Boston!
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
Best to buy a new one. Do not dip it in thinner!
@svdj80
@svdj80 6 лет назад
If it is acrylic paint you have used? It may work to drain a cotton cloth with sealing foam-pistol cleaner and work it in. You may do this several times if you have thick layers of paint. But unfortunately it´s quite expensive, at least here where I live ;)
@AlexDraghina
@AlexDraghina 6 лет назад
For acrylic - I used some auto break fluid. I let the parts soak in for about 20+ minutes, then I used a toothbrush to clean it off - it worked really well. But be careful with the break fluid - use rubber gloves, and discard of it properly (I put it back in the bottle for future use, but I will return it to an auto repair shop for disposal). Another (safer) alternative would be a windows cleaning product that contains ammonia, but I haven't found any around here.
@svdj80
@svdj80 6 лет назад
Integrering to hear. Break fluid has never worked for me if the paint is dry and even have an acrylic clearcoat on top. I had a model in such bath for 2 years and it didn't bite really. Maybe that the break fluid is too environmental friendly here.
@AlexDraghina
@AlexDraghina 6 лет назад
Daniel Jansson hehe. I had these parts marinate in water with dishwashing soap for a few weeks, with no results. While with this break fluid (dot 3, the cheapest I could find), it rubbed off right away. Maybe it's the clearcoat that it's more protective? (I hadn't painted the clearcoat, it was raw acrylic paint).
@styrenehelp
@styrenehelp 7 лет назад
new to modelling. why mark in black pen and sand off?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
C Haslam mark it so you know where it is. And when sanding you know when it is gone
@beverlygeary4524
@beverlygeary4524 8 лет назад
Where can I get the car stand you use for painting?
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
+Beverly Geary It is from Tamiya and they cal it a paint stand. Ebay should sell loads.
@beverlygeary4524
@beverlygeary4524 8 лет назад
+The Scalemodeling Channel Thank you. I found it and ordered it. Also want to thank you for the informative video. :)
@Workerbee-zy5nx
@Workerbee-zy5nx 8 месяцев назад
The po' boy way of finishing a kit is a can of krylon. Light sandpaper grit, rinse car off, dry, tack cloth all lint. Find a hot day, mist paint, wait, mist, until its glossy..
@kayavanekeren9673
@kayavanekeren9673 4 года назад
can some one help me and tell me what is te name of the thing what he car body is holding while he is painting it what is the name for that thing ?
@TheScalemodelingChannel
@TheScalemodelingChannel 4 года назад
Tamiya spray stand
@anthonygalpin9223
@anthonygalpin9223 3 года назад
Any point laquering gloss black
@TheScalemodelingChannel
@TheScalemodelingChannel 3 года назад
If you want to improve the gloss
@wizels
@wizels 9 лет назад
At the final score you forget about Screenwriter, Producer and Director! ))))
@amanzon274
@amanzon274 3 года назад
Hi! Why do you mark all the lines in black and after that you sand it?
@TheScalemodelingChannel
@TheScalemodelingChannel 3 года назад
Its a guidecoat to show the progress in removing the mold lines
@amanzon274
@amanzon274 3 года назад
@@TheScalemodelingChannel why should you do it? if i start paint the plastic body as it is this will be less professional?
@luukwu7193
@luukwu7193 7 лет назад
Ik kom er nu pas achter dat Nederlands bent maar je maakt super goede video's
@timbouman3641
@timbouman3641 7 лет назад
Luuk Wu je hoort het aan dat gebroken engels 😂
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
Tim Bouman zou dat het zijn?
@timbouman3641
@timbouman3641 7 лет назад
The Scalemodeling Channel hhhhm geen idee denk het
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
ik zou het knap vinden aangezien je nou niet echt een accent hoort, maargoed. dat zal wel aan mij liggen
@alpeena
@alpeena 4 года назад
wait..did u skip totally how you cleaned her up after sanding/before priming....?????????
@ianseville
@ianseville 8 лет назад
hi whats the name of the item holding the model
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
+ian seville Tamiya spray stand
@swicegodvwlover3130
@swicegodvwlover3130 6 лет назад
Hey, I wanna get myself some sanding sticks but I am not sure on what to get, can you help me, I wanna order on amazon cause I’m ordering something else but don’t wanna be screwed over
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
SWicegodVWlover not much to be srewed over when it comes to sanding sticks right ? Just look at price grit and size
@swicegodvwlover3130
@swicegodvwlover3130 6 лет назад
The Scalemodeling Channel you used 240 and 320 grit right, but isn’t that rough? What I usually use is hand nail files, and it’s pretty rough, I’m scared that I’ll buy some sanding paper or sanding stick and it’ll pass through the body
@TheScalemodelingChannel
@TheScalemodelingChannel 6 лет назад
Even with 40 grit youd have quite the challange sanding trough the body in 1 shot
@Teggymania
@Teggymania 7 лет назад
Would you recommend handpainting the body?
@TheScalemodelingChannel
@TheScalemodelingChannel 7 лет назад
hello there no. Not at all
@Teggymania
@Teggymania 7 лет назад
The Scalemodeling Channel Okay, thanks.
@birdy369
@birdy369 7 лет назад
Hello There unfortunately I'll HAVE to hand paint mine. I've seen a video on here of a guy who hand painted his model car, and it didn't turn out bad at all. he used very very thin coats of paint to avoid brushstrokes. and a lot of layers of thin coats too, he went about it very meticulously. now it will not give that perfect "like the real thing" finish, but as I said it didn't look bad at all. I'm only on my second scale model, first car, my first build was a Revell titanic (1:400 I believe? I'll have to check that) and I hand painted it. It turned out pretty well, not as well as I could have done, (had to rush it, it was a last minute Christmas gift) but brush strokes weren't extremely obvious to the eye.
@allplayyea
@allplayyea 8 лет назад
try it without spray its so hard
@ooyginyardel4835
@ooyginyardel4835 2 года назад
Love Strauss
@saragarnham
@saragarnham 4 года назад
I accidentally picked up a rough sand paper and I am seeing the scratches all over my shell. The spray is not filling it in and still seeing the scratches. Is there a way I can fix this?
@TheScalemodelingChannel
@TheScalemodelingChannel 4 года назад
Sand it with a finer grit and start over
@saragarnham
@saragarnham 4 года назад
@@TheScalemodelingChannel ok thank you
@BlackLabel2021
@BlackLabel2021 4 года назад
But why did you mark the body lines with a marker? I don't understand the purpose of that.
@TheScalemodelingChannel
@TheScalemodelingChannel 4 года назад
I mark the moldlines. To show where they are. And then use the markings as a guide for removing them
@lomate1963
@lomate1963 8 лет назад
Bellow 😁
@TheScalemodelingChannel
@TheScalemodelingChannel 8 лет назад
+lomate lomatey On top
@nejcftv3792
@nejcftv3792 3 года назад
Why do I need to use primer?
@TheScalemodelingChannel
@TheScalemodelingChannel 3 года назад
To get better adhesion for the paint and a better finish
Далее
Want a MIRROR shine on your model car?  Watch this!
11:21
19 Tips and Tricks for Scale Modelers
10:12
Просмотров 681 тыс.
How To: Black edge on the Windows
7:09
Просмотров 228 тыс.
How to paint Window Trim on a Model Car
15:42
Просмотров 52 тыс.
LETS TRY SOME WET SANDING AND POLISH!
26:24
Просмотров 4,3 тыс.
Respect🥺
0:35
Просмотров 3,1 млн
Крутыш на БМВ
0:12
Просмотров 1,5 млн