How to program 2013-2015 BMW 328i Smart Key with Autel IM608 FEM/BDC System "Process Explained"

Подписаться 11 тыс.

Просмотров 32 тыс.

50% 1

If you are looking to program a 2013-2015 BMW 328i key with the Autel IM608 FEM/BCD system, then this video is for you! In this video, I'll walk you through the entire process of programming a smart key with the Autel IM608 FEM/BCD system.
By the end of this video, you'll know how to program a 2013-2015 BMW 328i smart key with the Autel IM608 FEM/BCD system. So if you're looking to upgrade your car's key, then this is the video for you!
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com/@jvfix?lang=en
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!

Авто/Мото

Опубликовано:

12 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@computerisedcarandtruckdia9489 Год назад

Very informative video. Thank you.

@JVFIXLLC Год назад

thanks for watching

@elviscarey5270 Год назад

excellent video very detail thanks for sharing

@JVFIXLLC Год назад

thanks for watching

@rodrigoperez2720 Год назад

great video thank you

@JVFIXLLC Год назад

thanks for watching.

@fishonnelson2353 6 месяцев назад

Great work mi amigo! Muy Bien! Y gracias!

@JVFIXLLC 6 месяцев назад

no problem

@AriasElectronics 2 месяца назад

Good job bro! Thanks

@JVFIXLLC 2 месяца назад

no problem

@jordanammanshmesani Год назад

W Best video out there

@JVFIXLLC Год назад

thanks a lot. and thank you for watching

@alejandromillan4519 11 месяцев назад

Gracias a tu vídeo pude programar una llave para un 2016 bmw 328i y me paso lo mismo que a ti que después de programar la llave no prendió y me fui a restore eprom data and it works the car starts. Gracias muchas gracias por tu vídeo

@JVFIXLLC 11 месяцев назад

gracias por visitar el canal

@fadilabban5769 7 месяцев назад

Hello, I love your videos, I have not done a BMW yet, but programming keys is sometimes stressful.

@JVFIXLLC 7 месяцев назад

yea sometimes specially when is all keys lost

@partoems9376 2 дня назад

depends on the tool employed to do the add key or akl. autohex does it simple with little or no stress. just autohex is very expensive tool but among the best in its class.

@user-nu5nl3ob6h 3 месяца назад

شرح في المستوى

@arvinmohabir6044 11 месяцев назад

hey bro, the last part where you had to put the key and leave it and press ignition for 10 secs..... i saw you cut the video at that part.. what did you do to get it to work?? I'm having issues with that last part.. remote functions doesn't work and I've to brace key on coil for it to start

@doctorhvacr5869 7 месяцев назад

what if you have no working key every video everyone has a working key we need a video without working key AKL

@JVFIXLLC 7 месяцев назад

with this scanner you can do all keys lost, is pretty much the same process. sometimes is difficult but with time you get experience and it becomes easier

@mehdibechari9444 Год назад

Hello . Do you unplug the battery cars wires? Before you take off immobilizer from the car and after when returning immo box to the car if there is any changes on the firt key or on car systemes or something else

@JVFIXLLC Год назад

no need to unplug the battery just make sure the switch is off and u can remove the immo box.

@rodrigoperez2720 11 месяцев назад

Muchas gracias por el video. si tienes una llave lo puedes hacer por obd?

@JVFIXLLC 11 месяцев назад

si si tiene una llave que Abra es mas facil por obd2

@bobhutchins557 Год назад

Thanks for a great video (as always)! However, I did get lost several times from the middle of the video to the end. I've never done one of these FEM systems before so it's all new to me. But I really got lost after you wrote the EEPROM, reinstalled the FEM, took the FEM back out, did some more stuff, put the FEM back in, tried to learn the new key, learned it, key didn't start the vehicle, clicked on "Repair" and something got fixed so the key worked after that. I got (and am still) confused from 15:20 to the end. It seems you did several things (or maybe you didn't) that aren't on the video in that 7 minute span. From 15:45 (or so) to 16:15 you mentioned a bunch of things, ending with "you're going to get your original file. You have to disconnect just the power and plug the EEPROM. I already did that and it worked..." Then you had to get the password (would you have needed to get the password anyway, or was it because of the corrupt EEPROM that had to get restored?). Then, well, I was just lost. Not your fault. I just need to learn more.

@JVFIXLLC Год назад

ye these systems are a bit complicated sometimes I did it like that just in case it ever happens to someone that way you can restore it back in case you messed up. it's possible that it might work on the first try but yea that's how these new systems for bmw are designed.

@jamescc2010 Год назад

@@JVFIXLLC I find BMW and Mercedes to be complicated maybe 5-10 times difficulty level, requering more tool investment and learning curve, on different models than Japanese and USA makes for sure. Just got im508 and BGOX so I have to learn. Did VW add key one time as far as Euro car lol. For sure, pay will be much higher once you are good at.

@Best-hz8wt 9 месяцев назад

Is this procedure the same for akl? I got lost while procedure. Sow could you please text what to do. Like 1 read epprom. 2 modify epprom 3 write epprom back. 4 key learning ( precoding) etc. I lost after that. Thank you for your time!!😊

@JVFIXLLC 9 месяцев назад

this process is for all keys lost if you want to add a key u can easily do it by obd2 together with the xp400pro and aki I have never used that one sounds more complicated lol

@Peter-hw1yx 11 месяцев назад

So what exactly did the Autel im608 do when you pressed write operation ? Just created another slot to use for standard programming?

@JVFIXLLC 10 месяцев назад

yea it was done all automatically just following the steps. is easier when u add a key. when is all keys lost u need to disassemble module

@ronaldkakande6315 4 месяца назад

Good educational video, can Autel im508s do it!?

@JVFIXLLC 3 месяца назад

It should if you have the xp400

@Best-hz8wt 9 месяцев назад

Place, could you please make one more video for bmw 2016+ . I think a lots of people interested in that.. Thank you.

@JVFIXLLC 9 месяцев назад

as soon as I get one I will make a video

@mbo7613 8 месяцев назад

Will this work for a 2015 manufactured in October 2014? Local locksmith is telling be 2015 and up are dealer only?

@JVFIXLLC 8 месяцев назад

mmm that's an interesting one. do u have vin# maybe I can look something ip

@jamescc2010 Год назад

Why did you modify data file - so you can add a new key? I missed it - how did you save modified data before writing? I agreed with other I got lost but got some basic ideas. What ODB connection cable/device did you use for direct connection? When did you have to disconnect and connect car battery? Please make some more vides that we can follow easily. Thx

@JVFIXLLC Год назад

apologize for the confusion i revised the video and i noticed i cut part of the film by error, this process is used on all keys lost situation if you want to add a key there is no need to open the FEM. Let me know if you have a question

@dashtyATG Год назад

@@JVFIXLLCI noted coz there was 3 used key on the system.

@monteriano1966 Год назад

Hi JVFIX..... I follow your video and everything went fine to the point of rewriting the original file... then adding the original key and the new key... but after that vehicle will not start and g=aive a bunch of codes on fem module,,, I noticed on your video fem module shows 15 codes/// I tried rewriting the original and the backup file.. now I get (Failed to get version information restore EEPROM data and retry)... any idea how can I reprogram the FEM to his original state... appears that my files got corrupted some how, any input is appreciated... Thanks. my vehicle is a 2017 BMW 330e. FEM module is identical.

@JVFIXLLC Год назад

if u have the valid subscription just go to main menu and hit programming and do a programming on the fem module and it will code it too.

@Eurosmithpro Год назад

So your original "modified eeprom file" wouldnt load? why? So you had to flash the original "back up" file and then start over???Is this what happened? Hard to know cause you didnt really explain what happened, why it happened, or even show how you fixed it?

@mitchellnundlall3729 Год назад

Yes I tried doesn't read

@kennygarland5210 Год назад

Dont even try and follow this video...They are amateurs that dont know what they are doing..

@JVFIXLLC Год назад

@macartur66 Год назад

@@JVFIXLLC I was wondering why would you have to do it on the bench just to add a key, I have added keys via OBD to a 2018 3 series

@ccerwin 10 месяцев назад

You don’t have to flash the eprom when adding a additional key. Only if you have all keys lost is that correct??

@JVFIXLLC 10 месяцев назад

yes you are correct

@mihaicatalin9701 3 месяца назад

Hi. Can it be done without the J box? Thank you

@JVFIXLLC 3 месяца назад

yea u need it

@julezxbandit6734 2 месяца назад

well if you had a 608 pro 2 you can read from the obd 2 socket

@JVFIXLLC Месяц назад

yes u can

@CeeeRock1 7 месяцев назад

Please can I do this with Launch x431 pad 7 with xprog3?

@JVFIXLLC 7 месяцев назад

yea I think with xprog3 u van do it.

@user-jv3fd1zf1w 7 месяцев назад

Otros vídeos remueven el chip. Hay dos maneras de hacer AKL?

@JVFIXLLC 6 месяцев назад

si hay 2 maneras la mas segura es remover el chip

@uKeyMe Год назад

Hey bro I need some help, can I pay u for some info. I’m Stuck on the part of the video that got cut off

@JVFIXLLC Год назад

sorry about the confusion in the video I had a part on the video that I cut by accident. you can program the fob just using the USB and obd2 port and u will need the xp400 to generate the dealer key on a blank key.

@user-Alhassany Год назад

How long did the whole process take and where are you buying these keys from? Thanks

@JVFIXLLC Год назад

the whole process takes like 20min if all keys lost and about 10min to add a key. the key I bought it on ebay for 20 dollars.

@user-Alhassany Год назад

@@JVFIXLLC appreciate your kindness

@johnholding107 Год назад

@@JVFIXLLC if all keys lost do you read the isn from dme?

@car-key-programming Год назад

@@johnholding107 yes you do need isn.

@user-sr8ir5pn7t 11 месяцев назад

@@car-key-programming how to know when ite safe obdm ans when is not ?

@jonyovanno4145 5 месяцев назад

What did you modify in the eeprom data???

@JVFIXLLC 5 месяцев назад

the scanner did it by itself I think it does something to the flash data not the actual eeprom memory, this process is for all keys lost but if u want to add a key it can be done by obd2

@PavLockLocksmith Год назад

do you have video with akl?

@JVFIXLLC Год назад

no i don not, what car are u trying to read?

@AlpeshPrajapat1982 Год назад

All key lost scenario working video must make

@JVFIXLLC Год назад

as soon as I get to work on one I'll make a video. this one was kinda of a rush because the customer wanted the car that day.

@DavidPetrisor Год назад

i am also lost why he read eeprom and then wrote it back it looked like all the bmw ive done so far with the IM608 just read password then add key so not sure why he did that but soon ive be doing one of these and ill find out then

@JVFIXLLC Год назад

@vicogaming5357 Год назад

So you dont even need to read eeprom on bench anyway to add a key its just needed if they keys are lost . For some reason you backup twice the same file to do the same procedure by obd2.😊

@JVFIXLLC Год назад

if it is all keys lost you need to read it but if you only add with this tool you can do it by obd2.

@rajushaikh9045 10 месяцев назад

I was confused, thank you sir ☺️♥️

@yaboi5686 3 месяца назад

Is this process same for mini cooper

@JVFIXLLC 3 месяца назад

mini cooper is more easy. just plug obd2 and good to go

@yaboi5686 3 месяца назад

@@JVFIXLLC hmmm really ? Because the one I did said it couldn’t do it and it was DBC too ?!?

@yaboi5686 3 месяца назад

But it was AKL too

@Divinemindset04 6 месяцев назад

Uhmm i thought to add key only you just had to clone fast and easy by obd

@JVFIXLLC 6 месяцев назад

yea that's another way to do it too.

@myvideos853 Год назад

Is it support im 508?

@JVFIXLLC Год назад

if you have the xp400 reader you will be able to do it

@myvideos853 Год назад

Ok thanks

@CarCareSpotted 9 месяцев назад

Can you help how can write in dme

@JVFIXLLC 8 месяцев назад

that pocedure is abit more complicated, u wanna install a used ecu or program just keys

@mitchellnundlall3729 Год назад

How do you get to read eeprom I tried doesn't read

@JVFIXLLC Год назад

your clamp might probably not making good contact I had a similar issue too.

@vahasimon7022 10 месяцев назад

la pince autel ne fait pas une bonne lecture, pour faire une bonne lecture le mieux est de déssoudé l'eeprom @@JVFIXLLC

@alberts7061 Год назад

The clamp that comes with Autel never worked. Don’t blame the device for not reading the eeprom. I used another clamp that I used with carprog or other devices and Autel was able to read the eeprom.

@JVFIXLLC Год назад

yea I actually resolved that issue with the autel clamp by pulling the pins a bit out of the connector I was also having issues trying to read eeproms too.