How to Rebuild Harley Davidson Hydraulic brake System(1972-2023) 

The best. This is the way to do these kine videos! Awesome. Just grip it, rip it, and done! Mahalo nui, bro.

You’re quite the skilled mechanic

Aside from the top tips, I just love the fact that you end all your videos drinking a beer. Respect

Just tore my caliper apart, then watched your video, ..... and now it is time to do the master cylinder ....... just because. Thanks, outstanding content, and quality production showing details of each fix.

The flick of the beer cap is legit. Great video.

Watching now brother! Thnx again for the content! SPORTSTER4LIFE 👊

Thanks!

I have to do this exact job once the parts come in. But don’t have a flexhone that small. Have a 3 blade style for wheel cylinders, otherwise SS , nylon or brass wire brushes. Thinking possibly the brass one would work? Great info/video, helped me out again 😎

Man u inspire me to work on my bike and drink beer. Legend

I got a 2013 ultra glide with dual front calipers. Was in process with rebuild kit in hand, when pulling the old piston out found a need to figure out the best way to get the boot out without tearing it up (this one is a little different than yours in the video). I may try to punch it out from the other end? The rubber boot had a short plunger from the handle through the boot. The piston looks similar enough, but it's that rubber boot.

Doing it already on my bike. What is the lube for the piston sealing or is it the brake fluid?

After watchin a few of your DP vids, it's great to see a mechanic zip threw it...make it look simple and get to the cold one after completion. Simplicity is the best teacher.😎✌👊👍

Máster 🫡 saludos desde México

U may think that come east to you, but I'd say your a damn harley wizard like Keenan Tatro

Hey man good video have a question you might know the answer to. Long story short brakes were dragging, tried to bleed them had no movment in the lines. Fluid was nasty so replaced the line and tried to vacuum bleed down to the caliper, still no movement. Went to the master cylinder took it apart cleaned it good, (did not get the rebuild kit yet) and i still cant get any fluid to come out of the master even if i try to vacuum from where the banjo goes. Kind of lost at this point. Thanks for any info. 2000 soft tail

Great video ,thank you. My 1981 says I can use DOT 5 , can use it on the bike you just repaired the 2007 Ultra ? Thanks again .

I have a question about your parts cleaner.... I use kerosene in mine. What do you use?

Thank you.

Amazing

I've got stuck pistons! How did you get them out? I saw you blow one side out with air, how did you get the other ones out?

Hi, do I have to drain the fluid when I want to replace the roller on the brake lever?

Why not clean the master reservoir more thoroughly?