HOW TO REMOVE OR REPLACE INTAKE MANIFOLD ON HYUNDAI ELANTRA

Подписаться 972 тыс.

Просмотров 127 тыс.

50% 1

HOW TO REMOVE OR REPLACE INTAKE MANIFOLD ON HYUNDAI ELANTRA 2011 2012 2013 2014 2015 2016 2017 2018
► Replacement Gaket used in the video: amzn.to/2o0s2Of
In this video, we will demonstrate how to remove or replace intake manifold on Hyundai Elantra. We demonstrated how to remove the intake manifold on a 2013 Hyundai Elantra GLS. Some models and years might differ. More Hyundai Elantra Repair Videos: goo.gl/6HZZwS
This video might be helpful on:
2010 Hyundai Elantra how to remove intake manifold
2011 Hyundai Elantra how to remove intake manifold
2012 Hyundai Elantra how to remove intake manifold
2013 Hyundai Elantra how to remove intake manifold
2014 Hyundai Elantra how to remove intake manifold
2015 Hyundai Elantra how to remove intake manifold
2016 Hyundai Elantra how to remove intake manifold
2017 Hyundai Elantra how to remove intake manifold
2018 Hyundai Elantra how to remove intake manifold
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@AutoRepairGuys 5 лет назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@edgarjimenez8792 3 года назад

Just changed my starter thanks to your videos. I looked at this video to remove the intake manifold and the other video where you change the starter. Thank you.

@onenikkione 4 года назад

Thanks for posting this one. Looks like a DIY for someone with mechanical skills. I wanted to check my intake valves for carbon build up.

@meatmikesmom3395 6 лет назад

Thank you guys I've been wandering how to do this to my 2017 Elantra for months!

@TheTexican05 Год назад

As someone who has watched thousands of How To & repair videos on the YT, I can tell you: great video! Thank you guys for putting this together. Concise, well edited & informative. Cheers from TX.🍻🍺

@kdods22402 5 лет назад

Holy crap, bro! We used to go to college together. Your video just saved me a BUNCH of time working on my car. Hope all is well! -KDods

@orlandogutierrez768 3 года назад

Hi, great video, it help a lot! Question, then, how to install the manifold? Replacing gaskets and also, should I use gray silicone too? Or only with the gaskets? Thank you!

@erichkraus9799 5 лет назад

Can you make a video showing how to clean the carbon build up on the intake valves 2013 Elantra 1.8

@TheTexican05 Год назад

Believe it or not, this video covers 80% of the work. Getting the intake on and off is the worst part on most motors to do a carbon cleaning on a DI motor. The rest is as follows: 1) With the intake removed, rotate engine by hand using correct socket and breaker bar until cylinder 1 is @ TDC (meaning all valves on all cylinders should be closed). Use a flashlight and watch the valves open and close if you aren't sure. You can also do the screwdriver trick on cylinder 1 to find TDC (google this for more clarity) 2) You want to clean the valves and intake runners while the valves are closed, and remove the debris with compressed air to blow it back out of the intake runners, preventing any solid chunks, dirt, lint etc from having a chance to fall into the combustion chamber of the engine. 3) Different cleaning agents have different levels of effectiveness. Soaking is highly recommended. CRC makes some great cleaning agents for this. Normal, over the counter low-VOC brake cleaner also does well for half the carbon cleanings out there. 4) Let it soak for at least 30 minutes, longer if possible. Use low pressure compressed air (the keyboard cleaner cans work well for this) to extract the excess fluid, or suck it out with a MityVac handheld vacuum pump. 5) On a badly neglected engine where the carbon cleaning never got done, or the car wasn't taken to top tier fuel stations with proper detergents in the fuel, it's not uncommon to have to use a series of pick tools and scrape that carbon off like a dentist working on a meth addict's mouth. 6) Do what is necessary to remove the debris. Wear safety goggles. Don't let chemicals get on your paint or nice clothes. 7) Once the valves and runners are clean to your satisfaction, replace the intake manifold gasket and reinstall everything you removed. 8) There will still be carbon buildup on the pistons. You can use CRC's GDI induction clean product for ~$15/can to address this. You can also "soak" the cylinders with a cleaning agent while the engine is apart and not running (if you truly understand engines and know what you're doing) If you aren't comfortable with the above, don't touch your car. Take it to the professionals. It will be cheaper with less downtime and frustration for you. Posting this reply in case it helps other folks who are considering taking this project on for their DI engine (VW, Hyundai, GM, etc). Good luck! 🍺🍻😎

@Redbull_5757 4 года назад

Great video vut you missed some wire harness underneath that i had to figure out but yeah great video overall thanks

@witoldhuk5614 3 года назад

Great info. However, you could inform about the sequency and Nm's range for the manifold tightening.

@kgpcodes 2 месяца назад

Good guide. Looks similar to the Hyundai Accent 2020

@OldCrow120 3 года назад

Can you guys do a video on removing intake manifold on Hyundai accent 2012 and change fuel injector?

@TopicSet 5 лет назад

pretty nice watch to be wearing while working on a car

@lalabilloo 3 месяца назад

What is the torque spec for nets and bolts ? Thanks,

@IAmJustSaying6 5 лет назад

Why do they make engines so tight to work in/at? I remember my 1981 Toyota Corolla. You could get to any part of the engine very easily.

@jayryan7473 8 месяцев назад

I have a question about the gaskets. My car, a 2015 1.6 turbo sonata, only had gaskets around the valve intakes, no gaskets at the little ports in between. It came this way from the factory and always ran fine until a fuel injector went bad. What are those small square ports for?

@fabioeduardoromeroossa3098 3 года назад

Excelente video .Buen trabajo .from colombia

@jasonfreeland 6 лет назад

Possible to make a video about replacing the short block?

@javedtech9155 4 года назад

Hello friend. Need to know the (intake manifold tuning valve) "IMTV" location in the same car or any other elantra... Thanks a lot.

@JH-tk6ge 4 года назад

looks very easy, thank you

@jays99taco 5 лет назад

Do you have a video on replacement of the evap charcoal canister on the 2014 elantra 1.8 liter?

@calilife3588 Год назад

Can you do a video on how to locate a vacuum leak on a 2016 Honda alantra

@tararobinson2278 Год назад

What tools do you need for 2015 Hyundia Elantra limited?

@michaelbond903 Год назад

Do you have a video on replacing the starter on this vehicle? I have a 2012 Rio. Same engine.

@mikeykane5938 Год назад

If you remove the intake manifold you should be able to see and get to the starter.

@ant6456 2 года назад

I have a 2013 Veloster turbo. I cannot figure out what is the last attach point holding on the intake manifold. I got all the obvious ones. It is 9n the bottom somewhere. Please tell me this last attach point and do I need to disconnect the line that is attached to the top of the oil filter stand.?

@jeffbratt2643 4 года назад

Do you have a video for removing an exhaust manifold/catalytic converter on a 2011 Hyundai Sonata

@Oblithian Год назад

If the gaskets are silicone you probably do not need to replace them every time (just clean the surfaces well). But it they are plastic, you may or may not be able to get away without replacing them (depending on their ductility). Realistically though, if the gaskets for the manifold and throttlebody are

@BigO-wc2lg 2 года назад

Yo man my car sometimes the idle it drops when I’m accelerating could my intake possibly b the cause ? I had did oil change spark plug change and I clean my throttle body plate and my air filters are koo

@ZimouSpider 19 дней назад

Thank you

@ant6456 2 года назад

Need help removing Veloster turbo last attach point on under side of intake is holding me up . Has any one had this issue. Thanks it seems to be different than the one in above video . Money is a 2013 VT. THANKS

@Tewche 5 лет назад

Can You make a video on how to fix a horn and steering controls that doesn't work. After i disconnected my car battery for 30 mins those things stop working. I disconnected it to clear a check engine light from a cylinder 3 misfire. I have this same exact car.

@wrathofpaulii 10 месяцев назад

is this a Turbo GDI model?

@SuperTacos5 11 месяцев назад

Does anyone know how to do the intake manifold gasket on a 09 hyundai elantra

@hethenblack1280 4 года назад

Howe to replace catalytic converter no Hyundai elantra limited 2011

@hethenblack1280 4 года назад

??????

@jasonpervial155 5 лет назад

Where is the idle control valve located

@veryberry- 5 лет назад

Did you find it? Looking for it myself.

@edbobyrev147 4 года назад

Hey. I have the same car. Why do you have two air filters?

@IAmJustSaying6 5 лет назад

How about a drain and fill transmission fluid?

@prodbygustavo 5 лет назад

Do you have any videos on replacing factory Air intake? I bought an intake and would love to visually see the steps to take out the factory intake and replace it.

@jfresh2054 5 лет назад

ProdbyGustavo honestly it's super easy. I got a k&n intake and they came with step by step instructions

@prodbygustavo 5 лет назад

Dude, it definitely was super easy! I just have never done that kind of work under the hood so when my K&N box came in, all the parts looked easy, just the first sentence on the instructions pretty much said "Let a professional install" Lmaoo. Kinda intimidating. But step by step and the help of my dad, we got it in, in about an hour!!

@prodbygustavo 5 лет назад

I wish I could post a picture on here, but if you or whoever sees this thats interested (if it lets you click on it) www.amazon.com/HPS-27-538WB-Shortram-Intake-Shield/dp/B019O662FW/ref=sr_1_6?crid=27V1Q5V9E2D53&keywords=air+intake+hyundai+elantra&qid=1555537994&s=gateway&sprefix=air+intake+hyu%2Caps%2C152&sr=8-6 Thats the exact post i bought from. My name is Joshuaespinoza and you should be able to see my review and pictures!

@ivervj2923 5 лет назад

I got a 2015. Removing the original air box is not that easy guys. You have to remove the front left tire to get access to some bolts. And you need a good socket kit with extensions. BTW could someone tell me if the throttle body gets decalibrated when you disconect it. I'm planning on cleaning it but got a lot of different opinions.

@prodbygustavo 5 лет назад

Oh shit. We have a 2012 and we didn't take a tire off. Didn't even touch it. Just some extended socket stuff like you said and we got it. ! It was honestly easy for us. Took no more than an Hour.

@davidganfi5613 5 лет назад

Is this the same process on a 2011 Hyundai Sonata ?

@lawrenceborchardt8637 Год назад

Is there a screw that I can raise the RPM? For the life of me I can't find one

@alicopragarger549 5 лет назад

Good joop

@allaadinamergreebaa7152 7 месяцев назад

ازيك حبيب قلبي عامل إيه واحشني والله تحياتي ليك ياغالي

@zokizoki2524 5 лет назад

why would you remove throttle body?

@onenikkione 4 года назад

the two lines attached to it have coolant running thru them so easier to remove the t. body and leave it to the side.

@petar443 6 лет назад

bravo momcheta

@ferrarifast1429 4 года назад

You forgot to show the bottom bolt!!!!! It’s extremely hard to remove!!

@ricardosanz2321 9 месяцев назад

When you are under the car near the end of the fan and right in front of the plastic coolant. Look up you will see a metal bracket with 2 bolts. It is the top bolt you need to remove. You will need an extention, to get to it.

@scroogemcduck3446 5 лет назад

Do you always wear jewelry when working on automobiles?

@McLovinMcFlurry Год назад

Obviously not advised, but I was short cash replaced my starter after taking the intake manifold off and it drove 2400 miles from Ohio too San Diego. Obviously replace the head gasket, but if you can't don't let it stop you from getting the job done