HOW TO REMOVE OR REPLACE CYLINDER HEAD GASKET ON HYUNDAI ELANTRA 1.8 2.0 NU

Подписаться 944 тыс.

Просмотров 128 тыс.

50% 1

HOW TO REMOVE OR REPLACE CYLINDER HEAD GASKET ON HYUNDAI ELANTRA 1.8 2.0 NU
► Head Gasket: amzn.to/2ynGftE
► Head Bolts: amzn.to/2pFdepm
In this video, we will demonstrate how to remove or replace cylinder head on Hyundai Elantra or Hyundai i30 or Tucson with 1.8 2.0 NU engine. We demonstrated how to remove the cylinder head on a 2013 Hyundai Elantra GLS. Some models and years might differ. More Hyundai Elantra Repair Videos: goo.gl/6HZZwS
This video might be helpful on 1.8 and 2.0 NU Engine:
2010 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2011 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2012 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2013 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2014 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2015 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2016 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2017 Hyundai Elantra i30 Tucson how to replace remove cylinder head
2018 Hyundai Elantra i30 Tucson how to replace remove cylinder head
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@AutoRepairGuys 5 лет назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@damionhordge1478 5 лет назад

Need help changing my cylinders 1@2

@Jason-zz3cn 4 месяца назад

Rrryyy TY y😅m444m4r4r⁵😢😢5k7😢444😢⁴😢⁴😢😂 Þ as

@martwells786 5 лет назад

Best video I've ever watched... thank you!.. if I win the lottery or something I'll remember this

@peterbaloyi8107 6 месяцев назад

These videos are very much helpful. Am almost complete with putting my engine together

@christopher-michaelcopolil4062 8 месяцев назад

Thank you so much, you’re saving me 8k.

@dalefancher 2 года назад

You guys are awesome. Thank you for sharing your talents.

@alanchiu1285 3 года назад

U have very detail information than others. U are elantra expert.

@spenceryazzie765 4 месяца назад

One thing they don't talk about is once the timing cover is off the engine must be supported through the rest of the process unless you keep a jack stand under the car when you take breaks(timing cover has the engine mount attached to it). My subaru forester had a engine bracket underneath so no need for support.

@miralmas 5 лет назад

Great video I have Hyundai Tucson 2.0L petrol and the coolant coming out from back is it because of head gasket and I need all the torque specs for cylinder bolts and side timing chain cover bolts and for valve cover bolts and the engine bolts I want to change head gasket.

@1234567891633 5 лет назад

keep up the good work thank you so much for the effort

@remfernandez5310 3 года назад

Love your videos done in details. I have a question with hyundai i10 on how to retime the timing chain when slip. Thanks

@mallorygutierrez9243 6 месяцев назад

Excellent video ! As i watch, but wait there's more disassembly 😅😅😅

@andrewbryant9214 2 года назад

Subbed. I’d really like to have seen y’all replace the valves

@mmm4638 2 года назад

thats ONLY job of a machine shop.

@mcroadracer1 Год назад

Another excellent video

@eddiesheeran5791 3 месяца назад

Great video! Thank you!

@mustafapixel1749 2 года назад

عمل نظيف و لطيف شكرا 🌹

@seandknutson 5 месяцев назад

Great video! Lots of helpful details. I'd like to know more about disconnecting the exhaust. Do you have any tips for how to do that if those bolts are rusty and won't break loose?

@danysperez-carrillo6630 3 года назад

Good video mate’ cheers

@jairovarela6172 2 года назад

Real good explination tanks

@Warex06 2 года назад

Thanks for the video

@familiadinizemwashingtondc3072 4 месяца назад

Thanks for the video, teacher

@Matth-mg7yr Год назад

What did you use to clean inside the block? Those pistons are very clean! Also, where are the areas you need to lay beads of silicone on (besides the corners you lifted up)

@darkfox9999 5 лет назад

Good job

@louiecarlos7331 5 дней назад

Great video!

@mohitolewis9713 8 месяцев назад

Thanks For sharing

@bryanmarquette2703 10 месяцев назад

I am replacing the head gasket on a 2013 Hyundai Elantra Limited, and some how a dowel pin came out possibly somewhere on the head, or camshaft carrier, but I didn’t see where it came from. This is driving me crazy!! Can you possibly help with location of dowel pins, it is larger diameter than the two that the head gasket fits over.

@daginaldwheeler482 3 года назад

Are the head bolts torquing with aluminum block threads

@justinfox1169 2 года назад

Do you have the part number for the head bolts? My 2016 - bolts are all the same size and have washers, but the ones that came are different sizes and only 4 have the washers.

@JuanSanchez-ik7wx 6 месяцев назад

Wouldnt it be a good idea to have the top rebuilt while it was disassembled?

@frankosauto Год назад

Exactly how do you manipulate that front cover to remove it? My car is a 2018 kia forte 2.0 the exact same engine. I even removed the coolant hose to allow the engine to raise just a little more but the cover still wont clear the crankshaft!

@hussainkassim9781 2 года назад

Why you removed the oil pan? Can I hold engine if I put a lift jack on transmission side??

@johndoyle6235 2 года назад

I'm about to do my first engine rebuild on a 2014 Hyundai accent is there anyway you can send me the videos you have on dismantling and reassembly plz

@mr.buttermlg2457 8 месяцев назад

Is guide good for a veloster turbo 1.6 gdi engine.

@hugoalexisvillamayor 6 месяцев назад

Please take off your beauty watch😂😂. Nice video 🎉

@MrThommoht Месяц назад

How do you remove the AC vent on the passenger side of the 2014 Hyundai Elantra. Mine seems to be blocked. Thanks

@ivanrodriguez5130 4 года назад

Why do you have two air intake filters?

@michealheath1460 2 года назад

I have a 2012 Hyundai elantra limited i took it to the shop and they told me there is metal shavings in the oil and there is low compression in the cylinders they told me i need a new motor but i would like a second opinion the car turns over but wont start i replaced the spark plugs and ignition coils so far any ideas

@thebokchoys6284 5 лет назад

Can anybody help me I have a 2008 Mazda CX nine I need to know where is the engine Coolant sensor located at

@rr6542 Месяц назад

hello I have a question about about my 2010 Hyundai elantra I have hard time putting gas in and then I have a hard time getting it to startup I replace. the purge valve and still having problems with it need some help

@dannymaldonado7438 4 года назад

Excellent videos

@Schlumpfblau Месяц назад

Why remove the oil pan and camshafts? Are the cylinder head bolts under the camshaft?

@eugeniadavis2470 3 года назад

I see why they charge a lot of money to fix a head gasket.. Alot of work

@rogeralaniz5116 Год назад

How do you relearn the throttle on a 2013 elantra 1.8 L? This car is idling to low.

@JuanSanchez-ik7wx 6 месяцев назад

why did you remove the oil pan? Why did your remove the crank pulley? How did you get the exhaust separated?

@spenceryazzie765 4 месяца назад

Oil pan is connected to timing belt cover by 2 oil pan screws

@spenceryazzie765 4 месяца назад

Back exhausted is held on by 4 screws. 2 on exhaust pipe, which is easiest to due from the top(not really easy), and 2 mounting it to the back of the engine

@robertsmith3774 3 года назад

Can you show us how you checked the head for warpage, before you reinstalled the head?

@mmm4638 2 года назад

it has to be shining clean no blue green purple marks of burnts, and ofcurse with finger you shouldn't feel any scratches. regardless, head always should go to machine shop for inspection otherwise its a risk no mechanic wants to take

@YemaninetTekorkuari 4 года назад

Could you show us how REPLACE CYLINDER HEAD GASKET ON HYUNDAI Hi Grand Starex?

@JuanSanchez-ik7wx 6 месяцев назад

heat on the hose will make the removal easy

@joellefrancis960 2 года назад

Hello i have a Hyundai elantra 2012 it hesitates only when trying to accelerate not on steady gaz or cruise problem is no engine light trying to figure out the problem

@nizamsulaman2996 2 года назад

Hi , is this procedure for Hyundai engine code G4FC

@joshuasmith2814 3 года назад

This is great video... and now I definitely don't want to do it.

@antonioas709 Год назад

What about changing a head gasket on a hyundai azera

@mustafapixel1749 2 года назад

ب التوفيق للجميع

@jerrysherwood2886 Год назад

How about a how to Ls or 2jz swap an Elantra?

@nathanalexander8756 2 года назад

Is this the same engine in a Kia cerato

@mustafapixel1749 2 года назад

احسنت بارك الله بيك

@garfieldwatson3626 2 года назад

Is it safe to double Head gasket or use a thicker one if you only change piston and rings

@Warex06 2 года назад

You don’t ever want to stack 2 head gaskets, even if you had your cylinder head resurfaced/shaved.

@jshall1000 3 месяца назад

At 1320 after the air filter is that a turbo I couldn't catch what u said

@AlienBros 5 лет назад

I have a question for you guys. My mechanic found 13 decent sized metal fragments in the oil pan of my 2009 infiniti g37x. He has no idea what is causing it and the check engine and master warning light is on and we can't figure out what is causing it. I have pictures of the fragment if there is a way to send it to you guys I will do that. He found this when he went in to replace the galley gasket and found both gaskets and the timing completely in tact. The shifter is also locking up too and having a hard time changing gears unless you push up on it (it is an automatic). I do not want to give up on this car and I am already out $1000 for the labor on the gasket that wasn't even blown. The VVTC solenoid was also replaced for $700. This car is bleeding me money but I love it and don't want to get rid of it. It also keeps going into limp mode and when he cleared the codes the car ran perfectly with all the power available but it would quickly go right back into limp mode and the light comes right back on. I don't want to have to take it to Nissan but it is looking like I may have to. Do you guys have any idea what could be causing this? I really need help. Thanks.

@big_mac6037 3 года назад

I know exactly what it is it’s the oil galleys Notorious on those engines

@miralmas 5 лет назад

And it is 2017 Hyundai Tucson 2.0L Petrol

@evangelosmindis739 Год назад

You didn't replace the cylinder head screws, did you? To the best of my (somewhat limited) knowledge, they are not reusable, they should be replaced.

@fbaldus 3 года назад

One question? Did this gasket just fail? I have a 2014 elantra that's burning coolant and everything is ok (fans, thermostat etc) I. I removed the head and I can't even see where the it failed. I just wanted to know if it's common for this gaskets to fail. Car has 106k miles

@jaybarrera1834 2 года назад

most likely it failed due to deteriorating

@lintchit9960 4 года назад

Do I really have to take out all the parts from the bottom of the engine or can I just take out the parts from top of the engine until I can reach the headgasket?

@hallaluya6389 3 года назад

Something i really need to know as well

@austinhutson720 2 года назад

Same

@graymurillo5336 Год назад

You need to remove the oil pan, because it’s bolted to the timing cover on the side. If you forget it and break the timing cover it’s gonna cost you a lot more than you think.

@muhammadgill9157 2 года назад

What is the name of the piece he removed at 40:56??? I tried to create a new thread in it with helicoil and the manual drill bit broke off inside of the hole. I can’t remove it so I’ll have to replace the part.

@mouzzy77 2 года назад

upper camshaft carrier on cylinder head

@acrocheezefpv 10 месяцев назад

ngl, i was feeling like i was able to do this myself an save money, but when it came to the head bolts being torqued 90⁰, i feel like just paying apprx 3k to have someone do it for me lol idk, i may take a shot. itll b my first time doing real heavy labor on my car 😅

@Gagandeepsingh-tk3er 2 месяца назад

U didn’t showed the exaust connection, I’m stuck there

@ariebesserman3746 4 года назад

Why do I need to remove the oil bucket at the bottom at all ? Why do I need to support the engine from the bottom when I only remove the top of the motor?

@realvw 4 года назад

Don’t need to take oil pan off. You need to support engine so you can remove the motor mount. The motor mount is in the way.

@JoseSantana-pq3uc 2 года назад

smart man nobarika

@martwells786 5 лет назад

How to do the timing?

@jaydizzledyal1992 4 года назад

What do u need to know about the timming

@hussainkassim9781 2 года назад

When I pulled out the cylinder head. 2 small parts fell off. It looks like a socket without any threads. Where does it go. It looks like it was just sitting in a hole and fell off. Help please

@MenofValueSpeaks 2 года назад

Did you figure this out? It sounds like the dowel pin fell out. They are used the align the head so it can stay in place and not slide around on the gasket before torturing it down. Go to 47:30 , from the very top left of the engine block mating surface, you see a small bolt hole, a water jacket hole and right to the right of that hole is a metal cylinder sticking out of the head. That is a dowel pin. It fits in that hole and holds the head on that peg.

@yasminesli3997 3 года назад

Almost brand new engine why to change head gasket ???

@graymurillo5336 Год назад

Demonstration purposes.

@mannypogi1960 3 года назад

Why he cant removed his wrist watch?

@STiHigh1 2 года назад

I thought the same thing. Unprofessional imo. I found it a distraction while viewing what is otherwise a good instructional video. Surely that large, floppy watch must get in the way when fiddling around in cramped situations...plus it can't be doing the watch dial/crystal any favours. :)