How to replace a axle or inner/outer CV joint on a Caddy mk 2 / Fellica .

Подписаться 12 тыс.

Просмотров 104 тыс.

50% 1

In today's video we are going to change the inner and outer cv joints on the Skoda felicia fun. At least that was the plan.
Skoda Favorit
Skoda Felicia
Skoda Felicia fun
Skoda Pickup
Volkswagen Caddy MK2
But the other system is similar in most vag cars. Just the part is a bit different.
Breeze by Liam.M @liammmusic
Music provided by Free Music for Vlogs • (Free Music for Vlogs)...
Rain Dance by Dizaro @dizarofr
Music provided by Free Music for Vlogs • (Free Music for Vlogs)...
*Disclaimer
We, The Dutch Garage, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not The Dutch Garage.

Авто/Мото

Опубликовано:

10 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@tombson1770 4 года назад

First time i have ever replaced anything on a car, and it works! great video and thanks.

@TheDutchGarage 4 года назад

Ow man that must give you a rush right! Saving money and learning a skill.

@ivangreat133 6 лет назад

Excellent video, thanks for sharing

@TheDutchGarage 6 лет назад

It is always great to hear from you. Thanks for sticking around.

@sasascepanovic172 5 лет назад

Very good.Very useful.Thx

@TheDutchGarage 5 лет назад

That's great to hear.

@stevew6141 Год назад

Cool video I’m pleased you continued to the outer joint and didn’t give up!!! Thanks for your effort

@TheDutchGarage Год назад

No problem.

@ashy1423 Год назад

Thank you for this video. Ash from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

@aramraheem4235 Год назад

5 minutes watching this video I did change my cv boot easy peasy Thanks appreciate it

@TheDutchGarage Год назад

Good job! 👍 glad that the video was useful.

@aramraheem4235 Год назад

@@TheDutchGarage your video made it possible to do it without your video it would have took me way longer Taping the shaft with a hummer carefully job done Thanks 🙏 again

@JASON-vp6hp 3 года назад

Good job

@blairguinea6811 5 лет назад

Awesome narrative Sir..................too much style and knowledge here ! definitely not any BULLSHIT music ha ha

@donpixote3321 3 года назад

enjoyable video that's both informative and entertaining. Will help get the job done. Cheers

@TheDutchGarage 3 года назад

Wel thank you!

@gregoryharington6686 4 года назад

Excellent video. I like your "pot kruk"

@TheDutchGarage 4 года назад

Well thank you. I also like my bottle jack "pot krik"

@Adam-eb3rs Год назад

Thanks mate, helped me pry out the axle (just shoved a spanner and pushed and it came out, after ~30 mins with a prybar and no luck, lol.

@TheDutchGarage Год назад

They can be stubborn, it needs a sharp pull to come out. Glad to help. 👍

@jackbramwell5208 5 лет назад

This is great, realistic and humerous too! (eg : i am looking for the fool). But i just removed a drive shaft from my Caddy2 and there are some differences. Happily, the shaft is easier to remove because the hub bolts to the macpherson strut with 2 horizontal bolts (18mm ring spanner),

@TheDutchGarage 5 лет назад

Humor? Were?! Glad that it helpt you in your quest. And it is true that by removing the hub bolts you can get it out easier. In the past you could change your camber settings with this bolts. And I don't want to do a alignment after a axle change. But on the more modern cars it is most of the time fixed. It is just a old habit I think.

@Attee32 3 года назад

Very informative and funny

@TheDutchGarage 3 года назад

Thank you

@davidcousins3508 2 года назад

I think you are correct ..there sometimes is a difference between the left and right side ..

@jamaleldienyousufelmasri3688 3 года назад

Thanks a lot

@TheDutchGarage 3 года назад

No problem!

@ruebenbrown5722 Год назад

You are so funny. In a comedian sense I mean. Secondly. I like the way your not afraid to do things in the not so correct way. You get the job done though in a safe and fast way. Kia ora. (Keep well. In my native Maori language N.Z.)

@TheDutchGarage Год назад

Thank you for you compliment, i really appreciate that.

@PravithRamphal-kf1bo 10 месяцев назад

Hi have mk1 golf i changed linkage rubbers but it only grinding in revers but if give it small touch while it on it gos in some time u have play wit n gos in what could b worn

@davidauld4854 4 месяца назад

How much back and forward movement should there be on a inner tripod CV joint

@MihovIlian 6 лет назад

Great video. I only need to change the boot on the outer joint, is there any specific advice?

@TheDutchGarage 6 лет назад

ware protection... gloves I main of course it really is a nasty job. Just be sure jou don't pull out the inner cv joint from itself or the transition when you try to remove the outer cv joint. Or remove the whole axle from the car like I did. But be sure to top off the gearbox oil when you do that. See my other video about replacing the clutch ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8hkVDNWImrE.html some ware around the 25/26 mark I show you how to do that.

@jac1793 4 года назад

What do you recommend if I can't push new outer CV joint past the split ring on the axle? I try hitting with a hammer and also using OEM split ring but I get same result

@TheDutchGarage 4 года назад

I have seen people using a big ziptie or hose clamp to keep te c clip down. when putting it back. Sometimes a big glob of grease also helps.

@SkodaFeliciaBMMkW 3 года назад

What torque force to use to tighten the axle nut? Is 290 Nm too much? Or should it be in between 200-290 Nm??

@TheDutchGarage 3 года назад

What I could find it is 290nm.

@tylermator 2 года назад

Hi, do you have a link to that replacement shaft? I did the same as you and bought the wrong inner joint online...

@TheDutchGarage 2 года назад

I looked but could not find were I bought it from.

@mustafasamir5547 3 года назад

26:56 What forum do you use for the Skoda Felicia ?

@TheDutchGarage 3 года назад

I don't remember anymore.

@TechiesUnofficial 3 года назад

My outer joint doesn't come off at all. I've hammered it to a point where it made a spark but nothing. What's the trick?

@TheDutchGarage 3 года назад

These can be really tricky. Try to clamp the shaft to something solid like the control arm. And with a sharp wack try to get it loose. It's doesn't have to be a full forse blow. Good luck.

@masonpugh3637 Год назад

I don't have a special made tool like that how expensive is that tool to bind those tabs

@TheDutchGarage Год назад

Maybe 10 euro. But depending on what kind of straps you get. Not all of them need a special tool.

@varvinpaja 3 года назад

Nice videos👍 When we get More videos of Toyota ke10? 😎

@TheDutchGarage 3 года назад

Thank you. For some reason half of my family decided to move last couple of months so I was more moving furniture that moving wrenches for some time now.

@varvinpaja 3 года назад

@@TheDutchGarage Sometimes we need to move furnitures 🤗 for good reason. I keep following so IT Will show My RU-vid When u have finnished your furnitures tranportation 😎 Take care and all The best

@tubedujacques 3 года назад

die dopsleutel 30mm die jij gebruikt, wat is de maat van jouw luchthamer vierkant waarmee je in de dopsleutel gaat? Is die 1 inch of 1/2 inch? Kan ik bijv. ook een 30mm 1/2 inch dopsleutel gebruiken en daar een ouwerwetse momentsleutel met 1/2 inch insteek vierkant voor gebruiken? Ik heb geen idee hoeveel kracht ik met de hand moet gebruiken.

@TheDutchGarage 3 года назад

De luchtsleutel is 1/2 inch. Ik zou wel een momentsleutel gebruiken. De kans dat je de lager verpest is aanwezig.

@tubedujacques 3 года назад

@@TheDutchGarage Ik heb het geprobeerd met die ouwe momentsleutel en 30mm 1/2 inch, maar as moer zat zo vast dat de momentsleutel is gebroken. ik ga er nu mee naar de garage

@TheDutchGarage 3 года назад

Ze kunnen goed vast zitten inderdaad. Maar dan wel ik meestal gewoon een dop met ratel of t stuk en een lange buis. De moer gaat het zeker niet winnen.

@jac1793 4 года назад

how comes you did not grease the splines when putting on the new outer joints?

@TheDutchGarage 4 года назад

Don't know, it just didn't feel like I had to. They slide right on. But to prevented them getting stuck it is probably a good idea.

@jac1793 4 года назад

@@TheDutchGarage I think it's because you enjoy hammering stuff like that off haha, thanks for the video

@TheDutchGarage 4 года назад

@@jac1793 They can be REALLY stuck on there! Thank you for your feedback, I appreciate that 👍

@heheheh1707 3 года назад

Just got my left side replaced, but the dakadakadakadak is still there, pleaseeee help.

@TheDutchGarage 3 года назад

Other side? maybe gearbox bearings?

@heheheh1707 3 года назад

@@TheDutchGarage turns out its my inner cv

@TheDutchGarage 3 года назад

Wel I know what you are going to do this weekend.🙂👍

@lukes7001 3 года назад

De moer van de as zit nogal vast hier. Ik heb het geprobeerd met een slagmoersleutel van 360nm maar die krijgt het niet los. Hoeveel nm gebruik jij hiervoor?

@TheDutchGarage 3 года назад

Ja ze kunnen goed vast zitten. Ik geloof dat die van mij 1400nm doet. Maar anders pak een sleutel met een Lange buis eraan.

@lukes7001 3 года назад

@@TheDutchGarage uiteindelijk met een gasbrander en lange buis los gekregen. Een 1000nm sleutel kreeg het ook niet los.

@TRUCKSPOTTER 5 лет назад

everyone shows outer cv joint couse is easier to change it or what whats the point of 100 same videos on youtube

@TheDutchGarage 5 лет назад

That is true, i was really bummed out that the inner cv joint didn't fit.

@martlndimitrov6538 3 года назад

You put to much tension on the clamp.At 21.41 you will see it almost cut it. But not bad for a IT :)

@TheDutchGarage 3 года назад

Just tight enough :-)

@creamtube 2 года назад

Theres two very timely cuts: when the balljoint goes out and when it goes in. I cant get mine. It gets stuck on the crevis where the bolt goes thrue. Its comepletly stuck.... F¤¤k i hate cars right now

@TheDutchGarage 2 года назад

That sucks indeed. Did you lift both front tires from the ground? The swaybar is most of the time the ass in the story. It pushed the baljoint up.

@creamtube 2 года назад

@@TheDutchGarage weird thing is that i have no swaybar :s it's the thing down at the spindel/ball joint?

@TheDutchGarage 2 года назад

I doubt that you don't have one. But try to lift both front wheels from the ground.

@creamtube 2 года назад

@@TheDutchGarage some do, some don't. They tend to break so perhaps a prev. owner removed it