Тёмный

How to Replace a Plug End of Electric Cord | Fix Broken Plug on Appliance 

HouseBarons
Подписаться 64 тыс.
Просмотров 2,5 тыс.
50% 1

When a small appliance electric cord plug breaks, you can either throw the entire appliance away or fix the plug end. I had a coffee roaster motor where the plug end frayed and finally broke. It was a simple 2 prong non-polarized plug end that needed to be replaced. The local big box store or Amazon can supply an inexpensive replacement for the plug end.
Leviton 101AN 15 Amp, 125 Volt 2-Pole 2-Wire, Non-Polarized Angle Plug, Brown
amzn.to/3V1lQ7E
Leviton 101-WP 15 Amp, 125 Volt, NEMA 1-15P, 2P, 2W, Plug, Straight Blade, Residential Grade, Polarized, Non-Grounding, White
amzn.to/3KfOj4O
The procedure was pretty straight forward. I just needed to make sure I picked the correct replacement plug type.
The tools needed for this repair were a phillips screw driver and wire strippers which made cutting the wire simple..
THANKS FOR WATCHING!
Also, if you are in the market for any tools, check out our Amazon store front or the links below.
Visit our amazon store front for our recommendations for tools and supplies for DIY success!
www.amazon.com/shop/housebarons
If you click on any of the listed amazon links there or in this description and buy, we thank you for helping us out as a channel. We are Amazon affiliates and can earn from qualifying purchases and no extra cost for you. Thanks for the help in supporting our channel and enabling us to keep us making videos!
#fixplug

Хобби

Опубликовано:

 

26 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@SyntaxScout
@SyntaxScout Месяц назад
Excellent,clear video,no crazy background music,just right to the point in a friendly manner,thanks for sharing.
@Housebarons
@Housebarons Месяц назад
Thx for the kind words and for watching!
@MSM5500
@MSM5500 Месяц назад
I don't now about the US but Australian and the UK plugs come with the instruction that specifies the exact length of which wire to strip off to get the job done properly. Initially I disregarded the instruction and always had some hassle to fit wires nicely till it was explained to me by a qualified person. So I've been paying attention to the instructions since then.
@Housebarons
@Housebarons Месяц назад
Thx for the input and for watching!
@spoffspoffington
@spoffspoffington Месяц назад
If I'd forgotten to slide the cover over the wire before linking to the screws there would have been a certain amount of swearing involving the f-word
@garicrewsen1128
@garicrewsen1128 Месяц назад
I think DIYers get ahead of themselves, me included, often because we want the project over before it starts. 🍻
@Housebarons
@Housebarons Месяц назад
Too true!
@jafallica
@jafallica Месяц назад
Looks simple. Thanks for sharing.
@Housebarons
@Housebarons Месяц назад
It sure is. Thx for watching!
@ikemkrueger
@ikemkrueger Месяц назад
I have some problems with this plug end: 1. it is open at one end, hence water can get in case, 2. there is no strain relief.
@Housebarons
@Housebarons Месяц назад
It’s not a grounded outlet so it is really not intended for wet environments. Hope that helps. Thx for watching.
@WagonLoads
@WagonLoads Месяц назад
Step 1: Press those wire strippers against a grinding wheel until you have nothing left... Step 2: Get a set of real wire strippers and a diagonal cutter Step 3: Get some tubing that fills the gap between the cord and plug that will act as a strain relief.
@RonHelton
@RonHelton Месяц назад
👍👍👍👍👍👍
@Housebarons
@Housebarons Месяц назад
Thx!
@neonblowfish
@neonblowfish Месяц назад
No strain-relief knot unfortunately
@MJGonzalez99
@MJGonzalez99 Месяц назад
Thumbs down 👎💀💀💀Never do any electrical work unless you are qualified or have a good understanding of what you are doing. There is no way in the world I would recommend this person for doing electrical work on anything ! He didn't use a Underwriters Laboratories (UL) Knot the plug is too big for the job. The plug is the wrong type of plug to use for the job. The plug is the wrong size for the job. You can't use just any old plug you find around the house. Using the wrong plug will lead people into a false sense of security. They will see the ground wire and think that it is grounded. People will also grab the wire and yank it out by the wire instead of pulling the plug. Please people! Do not use this person's advice!
Далее
How to Properly Replace a Power Plug/Cord End
19:55
Просмотров 199 тыс.
Smart Sigma Kid #funny #sigma #comedy
00:26
Просмотров 8 млн
How to replace vacuum cleaner plug
4:09
Просмотров 18 тыс.
How to fix an extension cord end
10:25
Просмотров 748 тыс.
How To Repair A Damaged Electrical Cord Safely
7:06
Просмотров 195 тыс.
Power Cord Repair | Easy Fix
8:07
Просмотров 113
5 Mistakes Everyone Makes Changing Sockets ❌
11:44
Просмотров 485 тыс.
I Don't Get Why People Still Use These Joints
17:26
Просмотров 460 тыс.
How to Repair An Extension Cord - Replace The Plug!
18:44
Plasterboard HACK | Every DIY'er Should Know
11:29
Просмотров 511 тыс.
20 июля 2024 г.
0:58
Просмотров 2,5 млн