How To Replace A Tire Valve Stem Without Removing The Tire

Подписаться 16 тыс.

Просмотров 287 тыс.

50% 1

Step by step instructions using basic tools to remove and replace your wheels valve stems. Link to tool below! #bronco #valvestem #wheels
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks.
Letting all the ads play during the video also helps a tiny bit too.
Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tool Link:
AME INTL Quick Valve Change Tool
amzn.to/3LwaaUi
Other Options:
Quick Valve Change Tool
amzn.to/3L3SBup
********************************
Laser LAS5540 5540 Tyre Valve Tool Set 3pc
amzn.to/3isloNb
(No stems included)
*******************************
B'laster 16-SL Industrial Strength Silicone Lubricant - 11-Ounces
amzn.to/3o5LXeL
Follow along on:
/ broncosandparts
@broncos.and.parts.garage on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and OBS Ford Truck Parts
FTC Disclaimer
---------
This video was not sponsored. All items were purchased with my own money unless otherwise stated and opinions are my own. If I do receive products for free, I will always disclose it, and always give my honest opinion.
This description contains affiliate links which means if you click on one of the qualified product links, I’ll receive a small commission if you decide to make a purchase. This does NOT cost you anything extra and if you don’t want to use the links you can always search Google and purchase the product separately, no worries.
Thanks !

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 175

@BroncosandPartsGarage Год назад

This is on sale now!! Under $38. amzn.to/3LwaaUi

@filmaker256 Год назад

for lube could i use a little motor oil?

@BroncosandPartsGarage Год назад

I wouldn’t. But in emergency….

@SerenoOunce Месяц назад

@@filmaker256 *NEVER* use oil on rubber. Any petroleum distillates will cause it to degrade. You would use silicone lubricant or possibly WD-40 at most. Best DIY lube for anything tire related is actually plain dish soap.

@AndrewLaneCPA Год назад

Thank you for this video it was just as quick and easy as you showed it. I initially ordered the kit where you have to remove the tire and got nowhere as it is not an easy task with a wide Kubota Tractor tire. This kit was well worth the extra money in time saved.

@matthewmolina9485 Год назад

Excellent! Very well done! No BS! No blah blah blah! I was really impressed with your video! I wish all RU-vid videos didn't have so much BS, people listening to themselves talk. Again! Well done!

@BroncosandPartsGarage Год назад

Thank you

@tonyalways7174 Год назад

Excellent clear no waffle video. 👍🏻👏🏻👏🏻👏🏻

@BroncosandPartsGarage Год назад

Glad it was helpful!

@neilsunseekers 4 месяца назад

Thanks I never knew you could do it so easy, I will give it a go.👍

@BroncosandPartsGarage 4 месяца назад

Links for kit in video description.

@lowlikeme Год назад

Dude that's cool😎👍...like how U explain everything....Thank You

@BroncosandPartsGarage Год назад

No problem. Thank you

@Trydntru 2 года назад

Great heads-up on that tool. Great video.

@BroncosandPartsGarage 2 года назад

Thanks. I thought it was pretty neat. Small insurance.

@bradheiner6869 5 месяцев назад

Great Job !! Looks pretty straight forward

@BroncosandPartsGarage 5 месяцев назад

Thanks

@Skitter302 2 года назад

Adding this to my Trail kit. Thats cool.

@BroncosandPartsGarage 2 года назад

Not a bad option for a few bucks

@donpoochi 7 месяцев назад

Your video was honest and awesome

@BroncosandPartsGarage 7 месяцев назад

Th is. It was fun to make

@beeshglock8999 Год назад

this is so helpful! thank you!

@BroncosandPartsGarage Год назад

Hope it helps

@tilluballu6009 Год назад

Very nice knowledge 👌 thankyou very much.

@BroncosandPartsGarage Год назад

Thanks for liking

@chrisallen399 9 месяцев назад

My old valve stem fell into the tire. It’s ok bc the tire is on a trailer that sits in the yard. Everything else worked as you showed. Thank you.

@BroncosandPartsGarage 9 месяцев назад

Won’t be an issue

@bigpeezyweezy 5 месяцев назад

@@BroncosandPartsGaragegreat guy!

@davesbroncogarage Год назад

Great video, I needed to do this very thing two months ago to my Bronco. I didn’t know a tool like this existed and had to take my tire to the tire shop.

@BroncosandPartsGarage Год назад

Thank you!!

@rickobrien4025 6 месяцев назад

Wasn't it cool that the video shows him fixing a Bronco wheel , just like yours !

@magdump7380 3 месяца назад

Love the Alcoa’s. I run the same wheel on my ‘74 Bronco.

@BroncosandPartsGarage 3 месяца назад

Forged and tuff!!! We sell them used.

@dxbfk Год назад

Excellent tools.

@BroncosandPartsGarage Год назад

In the field- priceless. Link in description of video

@ahmedbamouh4936 5 месяцев назад

Thanks for the tip

@BroncosandPartsGarage 5 месяцев назад

No problem!

@jthek2000 Год назад

Great video. I’m doing this project for 4 tires later this week. Wish me luck.

@BroncosandPartsGarage Год назад

Take ur time. Don’t bent the j-hook. Lots of lube. Pretty straight fwd

@Tonyscasa 4 месяца назад

How did it go ?

@jthek2000 4 месяца назад

@@Tonyscasa worked out perfectly

@dandiaz2275 5 месяцев назад

Thanks for sharing

@BroncosandPartsGarage 5 месяцев назад

Thanks for watching!

@user-dx5ds3xb9l Год назад

גאוני -BRILLIANT

@BroncosandPartsGarage Год назад

Thanks

@Sadie04074 2 года назад

Thanks!

@BroncosandPartsGarage 2 года назад

No problem

@mary-louepner5370 Год назад

Good info

@BroncosandPartsGarage Год назад

Glad it was helpful!

@bradheiner6869 5 месяцев назад

Yea anytime Your video was great

@BroncosandPartsGarage 5 месяцев назад

Thx

@johnnys8393 9 месяцев назад

I just tried this using this exact tool. The valve stem came out fine enough, but for the life of me I couldn’t get the new valve stem into the wheel. I used enough lubricant that Ron Jeremy could slide through a keyhole and hammered the absolute sh!t out of it but the end of the valve stem still wouldn’t go through the hole at the end of the valve stem guide.

@BroncosandPartsGarage 9 месяцев назад

Strange. I’ve used it a few times. My first was that video!

@SerenoOunce Месяц назад

Did you use a dead blow hammer? A normal hammer would have too much bounce-back when hitting a soft material (rubber).

@gerardjones7881 6 месяцев назад

you can use any funnel that fits, a piston circlip install tool also works. i've done them with soap and a screwdriver in a pinch.

@BroncosandPartsGarage 6 месяцев назад

This one won’t deform. It’s a nice kit

@orig66Super 2 месяца назад

Thanks

@BroncosandPartsGarage 2 месяца назад

No problem

@adiljames2913 Год назад

MERCI POUR LE TUTO

@BroncosandPartsGarage Год назад

No pr

@Masjo-tw7uh 14 дней назад

Nice

@BroncosandPartsGarage 12 дней назад

Thanks

@robertbennett3432 2 года назад

Good job thank you for the info.

@BroncosandPartsGarage 2 года назад

Thank you

@kellymitchell6084 9 месяцев назад

Nice to know

@BroncosandPartsGarage 9 месяцев назад

Thx

@ChristopherPowers77 2 года назад

Huh... well that's cool! When I was a kid I worked a stint at Benny's changing tires and I replaced lots of them but never like that!

@BroncosandPartsGarage 2 года назад

I thought it was pretty cool as well. I guess it’s been available for a long time

@larsbonnesen5930 8 месяцев назад

I recently had a leaking valve stem. Called the tow truck and arranged time at the tire shop. But the tow guy could fix the valve on the spot almost like you did - but instead of pulling the old stem out, he broke it off and pushed the rest of the stem inside the tire. The rest was like you did it. So now I have half of a stem rolling around inside my tire... but it doesn't seem to do any harm...

@BroncosandPartsGarage 8 месяцев назад

Nice. Better to take out but job is done.

@josephhomen 5 дней назад

It’s fine

@Jordan-ql6tm 9 месяцев назад

This was a super informative and easy video appreciate your quick no BS way of explaining things LOL. You are into sub my friend

@BroncosandPartsGarage 9 месяцев назад

Thanks for the sub!

@Jordan-ql6tm 9 месяцев назад

@@BroncosandPartsGarage your video is gonna save me some trouble lol. Lost my wheel lock and found my ole '98 z28 with a flat in the garage lol. Gonna be. A few days before the wheel lock replacement gets here, lucky they still had some it was a good decade old discontinued model and they only had 20 left 🤦.

@u.s.a.198 2 года назад

Ty.. I have a 2003 gm..

@BroncosandPartsGarage 2 года назад

Glad it helped!!

@shark70007000 Год назад

Wow! That is awesome! I need that tool! LOL That's what I get for being cheap. Not replacing those when I change my tires. The hook tool isn't my biggest concern. I don't mind pushing the rubber piece into the tire to be removed next time I have to change tires. So I really just need the funnel and puller parts.

@BroncosandPartsGarage Год назад

Right on. Out. You don’t want that bouncing around throwing off your balance.

@shark70007000 Год назад

Update: got tool. I now have 2 end pieces of valve stems in the tire. Spinner handle part is in pieces, hands all beat up. First attempt, the edge ripped off the new stem where it was going in. Once I find my valve stems that I set aside for the job, then I will attempt a second one. Wish I had the dead blow hammer. The hook tool looked like a bigger hook than that one. I couldn't get the tool out until it finally just pulled through the rubber and dropped that piece of rubber into the tire.

@shark70007000 Год назад

Update: Now that I used my splitting maul, it went right in without a problem. Then I pulled it out, into place. 👍🏼

@decideswell6699 2 года назад

What lubricant should I buy? Do I need to wire brush any corrosion? I wonder 💭 will it leak any sooner then normal ?

@BroncosandPartsGarage 2 года назад

I used silicone spray. You can use dielectric grease too. Wire brush would depend on your wheels finish. You don't wanna destroy paint or aluminum, wheels!

@JohnSaylock-ec4cd 6 месяцев назад

Ha ha K-Y jelly might be the ticket.

@uso_Jus2SmooTh94 Год назад

Ok what's that hook tool called and the other one and where can I get it from?

@BroncosandPartsGarage Год назад

Click on title of video. Link for amazon

@Fu-manchoo 9 месяцев назад

After reading the comments you are all forgetting this tool is for when you are in the bush and can't find a tyre fitment shop to replace the valve stem. Also it for emergency use when you are out far in the bush and haven't got a way to get to a town to get a tyre fixed. Is it not better to have peace of mind knowing you can at least fix a broken valve stem if you need to? It is the same as having a puncture repair kit in your vehicle only it is for valve stems.

@BroncosandPartsGarage 9 месяцев назад

Bingo

@tomato1417 Год назад

Anyone tried this with the HIGH PRESSURE rubber valve stems used on light trucks? I'm guessing the hight pressure variant of stem would not insert. Would appreciate any working knowledge.

@BroncosandPartsGarage Год назад

These were on F150 wheels.

@johntexan4165 Год назад

Think I would be able to do this without removing the wheel from a camper trailer?

@BroncosandPartsGarage Год назад

Yes. As long as the stem is “flush” on the wheel.

@7008aspen Год назад

Hell Yeah

@BroncosandPartsGarage Год назад

Thx

@bradhudson2468 2 года назад

Can you do a video on removing the pull out ashtray?

@BroncosandPartsGarage 2 года назад

Pull out ashtray. (Not all the way) Remove (2) 7mm screws in the black chassis. Then under the ashtray you’ll find another 7mm screw in center. Remove. Slide ashtray out a ONE UNIT. Never try and remove the ashtray without the metal chassis. There are some harnesses to unplug.

@bradhudson2468 2 года назад

@@BroncosandPartsGarage Thank you, saved me a lot of time!

@psycuhdelik8858 6 месяцев назад

i hope i can do this with the wheel still on the car... i got new tires and didn’t know they apparently wheel locked EVERY lug nut or something. like 3 different ppl tried to use the key and cracked it. now one of my tires is flat and won’t take air. 😩

@BroncosandPartsGarage 6 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-riN32Xsmm6Q.htmlsi=YndEWU1bUzGcEal_

@fhazen01 Год назад

I could be simpler still with a tire that doesn’t require balancing. Simply cut the valve stem flush with the wheel and push what’s left inside the wheel. Then proceed with the tool and cone as in the video. The little knub of the stem floating around inside the tire won’t hurt a thing.

@BroncosandPartsGarage Год назад

Many ways. This one’s pretty cool.

@Mark-Dibble 2 года назад

Is this a temporary fix or is this the same type of valve stem that a tire store would install?

@CriCKiD3 2 года назад

Its the same that a tire store would install. they're relatively cheap, just make sure you get the right 'size', it should say on your old stem. easiest way to tell

@BroncosandPartsGarage 2 года назад

Well said. And true

@BroncosandPartsGarage 2 года назад

Tire store quality.

@Mark-Dibble 2 года назад

Awesome! Thanks guys! I’ll forever be keeping this repair kit in my tool box.

@jbraborn 2 месяца назад

Given how it works, I feel like you could just yank it out with some pliers though, right?

@BroncosandPartsGarage 2 месяца назад

There is a tool for everything and this one does it perfectly

@jbraborn 2 месяца назад

@@BroncosandPartsGarage for sure, I'm just wondering if you feel that this is necessary

@anthonyraymond4933 7 месяцев назад

That was like 269 seconds pretty close to the 10 seconds you told us in the beginning lol 😅

@BroncosandPartsGarage 7 месяцев назад

Thanks for watching the video. The entire process to 269 seconds, but the process of leveraging, the valve stem out of the wheel with the Tool took about 10 seconds. 💥

@angelisone Год назад

2011 Hyundai Tucson has TMPS sensors. Can I remove sensors out and would this or other normal valve stem would fit? Unless anyone knows the battery size on the TPMS, then I can change it. Don't have suv yet & just helping a friend out.

@BroncosandPartsGarage Год назад

Sensors need tire removed from bead

@angelisone Год назад

@@BroncosandPartsGarage No, not really. The tire doesn't really need to be removed out of the wheel. My question pertain to the normal valve stem to be installed onto the wheel & not using the TPMS sensor.

@lostgary0 Год назад

Your tpms light will be permantly on if u remove a tpms sensor. Other than that ur good to go

@angelisone Год назад

@@lostgary0 The TPMS indicator light is burnt out🙂 Gaskets/O Rings worn/cracked & dead batteries. Not really good to go until they need wheel balances. Remember TMPS has some weights vs just V Stems.

@lostgary0 Год назад

@@angelisone ya and and u would need wheel balanced after taking tpms sensor out what’s ur point ?? I’ve done it in multiple vehicles

@timothydaly4136 9 месяцев назад

good tool but guys in florida change them for $10

@BroncosandPartsGarage 9 месяцев назад

Not on the trail though 😉

@trollrx 7 месяцев назад

If the pulling tool is junk a brake spring tool will do the same thing and it's much sturdier.

@BroncosandPartsGarage 7 месяцев назад

Except….. it’s a great trail tool.

@rickc2222 Год назад

looks like one could easily save $40 and rig it up yourself with a plastic funnel (the long skinny ones) and a thread on valve puller tool. - might need to weld or glue the pivot so it stays straight. This tool kit should really be only $10-15 given the super basic cheapness of it

@BroncosandPartsGarage Год назад

Those pullers ALWAYS rip the valve stem in half. Lol. But have at it. It’s a great kit

@BroncosandPartsGarage 2 года назад

Don’t Forget To Subscribe For More Content !!

7 месяцев назад

This is actually the valve, the valve stem is part of the valve

@BroncosandPartsGarage 7 месяцев назад

Yawn…

@user-vd4ib2gm9j Месяц назад

one or two use item- I will break the bead because for $38 I could have somebody else do the work

@BroncosandPartsGarage Месяц назад

Not out in the woods.

@1960house Год назад

I would not be using spray lube on any truck or trailer tire stem aired up to 65 psi...

@BroncosandPartsGarage Год назад

These were OBS ford wheels and tires. 35-40 psi. Always follow manufacturers recommendations. I’ve never seen a valve stem “shoot out” of a rim in 52 years…. Always a first I guess

@vegan-rising 6 месяцев назад

probably won't work with the thicker valves, the ones that go on winter rims

@BroncosandPartsGarage 6 месяцев назад

can only try!

@patriciareynolds2729 Месяц назад

just cut off stem and it falls inside tire to flop around which isnt good.

@BroncosandPartsGarage Месяц назад

If it’s no good, why not do it properly? It’s a $40 item.

7 месяцев назад

This is actually just the valve, the valve stem is part of the valve.

@BroncosandPartsGarage 7 месяцев назад

Yawn

@Fu-manchoo 9 месяцев назад

Just take a spoke from a bicycle to remake the puller.

@BroncosandPartsGarage 9 месяцев назад

I always carry bike spokes in my truck!! 😉

@mattradcliffe9279 Год назад

Why not break the bead on one side, stand on the sidewall. Cut the old stem off from the back. Pop the new one through. Done and inflating in under a minute.

@BroncosandPartsGarage Год назад

Lol. Thanks man. That made me laugh. Out on a trail, breading a bead by? Standing on a tire? If you can do it in under a minute I’ll eat my iPhone.

@thecrowsblow 8 месяцев назад

Yep, take the wheel off, break the bead, remove the old valve, install the new valve, put the wheel back on. All done in one minute. Sorry..."under a minute." I agree, that's a lot better way.🤪 I'll look out for your video.

@autoshopboss Год назад

Or you can always just come on down and I got ya

@BroncosandPartsGarage Год назад

Think out in the trails….

@jasontalbot1379 9 месяцев назад

Tool over $30 that breaks after two uses. Tire shop can just do it for me for less than that

@BroncosandPartsGarage 9 месяцев назад

Not out on the trails you can’t. 😉

@CerebralAilment Год назад

Ya lost me at $32 tool.. lol $10 to have a shop replace the valve stem.

@BroncosandPartsGarage Год назад

Your missing the point here 😃 Good luck finding a shop out on the trail. Or traveling to tire store and waiting 1-2hrs.

@euromobile900 Год назад

Hah, where can you get a shop to replace a valve stem for $10?! I want to go to such a shop! In new england they charge at least $30 - if they deign to do it at all!