How To Replace An Old 2 Prong Outlet Receptacle To A 3 Prong Outlet GFCI Per NEC CODE 2020 | DIY

Подписаться 519 тыс.

Просмотров 73 тыс.

50% 1

ITEMS I USED:
- NEC 2020 Code Book - amzn.to/3HveiSW
- Outlet / Receptacle Tester - amzn.to/3J50rTy
- 3 Prong To 2 Prong Adapter - amzn.to/3rrhhGd
- Voltage Detector - amzn.to/3J0GxJq
- Electrical Box / Receptacle Level Plate - amzn.to/3rreNYB
- Leviton GFCI Outlet 15 Amp Tamper-Resistant Receptacle - amzn.to/3GrRPot
- Leviton 15 Amp Tamper-Resistant Duplex Receptacle - amzn.to/3L9mla2
- Wire Strippers - amzn.to/3B5xjc7
- WAGO Wire Connectors (36 Pieces) - amzn.to/3J9xAOd
- WAGO Wire Connectors (75 Pieces) - amzn.to/3sg6bmS
- Insulated Pro Electrician Screwdriver - amzn.to/3HFuGQA
- GFCI “No Equipment Ground” / “GFCI Protected Outlet” Sticker - amzn.to/3orqwV3
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE!
www.amazon.com/shop/genevo9
On this episode I'm going to show you how to replace an old 2 prong outlet receptacle to a 3 prong outlet GFCI Per NEC CODE 2020! You can find the written instruction on paragraph 406.4(D)(2)(a), (D)(2)(b), and (D)(2)(c). A lot of older homes still have these non-grounded type receptacles and the ways you can accomplish having this 3 prong is by replacing it with a GFCI outlet receptacle or rewiring the whole circuit! I hope you find this easy to follow step-by-step tutorial DIY you can easily do at home perfect for beginners!
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@yahoo.com
DISCLAIMER:
This video is meant for informational, educational, and entertainment purposes only! To better your knowledge on the concepts of electricity, electrical circuitry, entertainment component circuitry and all other wiring methods. Electrical codes in my area may be different from yours so always make sure you follow and stay current with your local code. With different codes around the world constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Fix This House cannot claim liability with all applicable laws, rules, codes and regulation for a project. DO NOT ATTEMPT ANY WIRING OF ANY KIND if you lack the knowledge and understanding required. Otherwise, personal injury and/or death as well as property damage or loss could occur. Your safety is your own responsibility, including proper use of equipment and safety gear, and determining whether you have adequate skill and experience. If you are a younger person or are inexperienced with electrical devices, ask for help from a parent, teacher or a licensed professional.
WARNING- Electricity is dangerous and can cause personal injury or DEATH as well as other property loss or damage if not used or constructed properly. If you have any doubts whatsoever about performing do-it-yourself electrical work, PLEASE do the smart thing and hire a qualified and licensed electrician to perform the work for you.NEVER WORK WITH LIVE VOLTAGE. Always disconnect the power source before working with electrical circuits.When performing electrical work, ALWAYS READ AND FOLLOW THE MANUFACTURERS INSTRUCTIONS AND SAFETY GUIDELINES. Always follow your local electrical code and requirements which are specific to local areas.By utilizing this video and the information given, YOU are expressly holding "FIX THIS HOUSE" HARMLESS FOR ANY PROPERTY DAMAGE, PERSONAL INJURY AND/OR DEATH, OR ANY OTHER LOSS OR DAMAGE THAT MAY RESULT FROM YOUR ACTIONS. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Fix This House cannot be held liable if they cause any damage to their homes. Fix This House and all parties associated with it ARE NOT responsible for the use and results of this information by any party, especially those lacking sufficient skill or knowledge to perform these steps safely and ANY HAZARD CREATED IS THE SOLE RESPONSIBILITY OF THE USER.
DISCLAIMER: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.
#outlet #GFCI #GFCIoutlet

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@dan-777-abc 2 года назад

Have to ask what’s the use case here? Where and what type of Homes would have this scenario? Meaning who has two wires going to a plastic J-box? I’m used to seeing the old house metal conduits to a metal j-box or the new house Romex 14/2 or 12/2 to a plastic j-box.

@FixThisHouse 2 года назад

Hi! This is just an example.sorry I should have made my mock-up more realistic with a metal electrical box 😊🙏🏽

@esthermcgough3995 Месяц назад

With a metal box should you protect the gfci with elect. Tape?

@VOLTRONDEFENDER4440 24 дня назад

If the box is metal then it is recommended to use electral tape but their won’t be a ground late reply

@VOLTRONDEFENDER4440 24 дня назад

You explained everything right one thing you miss mentioning is if the box is metal it’s recommended to use electrical tape how gfcis work without ground is it can sense an imbalance in the hot and neutral wire!

@jasmin0930 2 года назад

Very very informative and clearly explained and demonstrated for regular folks. Thank you for all your time and research that goes into everyone of tour videos I’ve seen. 🙏🏻🙏🏻🙏🏻

@FixThisHouse 2 года назад

Thank you so much for the awesome feedback! 🙏🏽😊

@SleepyKittens 2 года назад

Thank you for clearly explain the code, and how it works. Now I am confident about replacing all those basement 2-prong outlets.

@FixThisHouse 2 года назад

I’m glad I could be of help! 👍🏽😊🙏🏽 thank you for watching!

@simongee2521 2 года назад

Love the video. Very educational and well explained. I have change out a couple at my mom's old house. Thanks!

@FixThisHouse 2 года назад

Thank you so much! 🙏🏽😊

@tedlahm5740 Год назад

Very clear concise information. thank you

@stevemain3673 Год назад

Great video. I appreciate how you presented the information! You are a great teacher. Thank you!

@FixThisHouse Год назад

Thank you so much Steve! 🙏🏽😊

@user-hq7sw9hn9k 16 дней назад

I plan on using breakers and identify each plate with the stickers and the circuit breaker number, enjoyed your video. Note: the homes that you'll see this will general purpose receptacles and lighting together, makes you ask the question "With the afci circuit breakers, why run a ground wire? "

@sheena_marie5936 11 месяцев назад

Thank you for this video.I was having a hard time trying to figure out if it was safe and up to code if I were to replace my old receptacles with a gfci one even though there is not ground wire.I thought it had to have a third ground wire no matter what.so thank you for clarifying this.

@douglasgreaves188 2 года назад

UK we put ground fault device in distribution board this protects all outlets on circuit plus cable run. Also all devices are designed so you can't come into contact with live parts.

@hilarioavalos5034 Год назад

Thanks you was very helpful

@mgt46 2 года назад

Great video, I have a old house built in 1939, I want to replace a kitchen outlet with a GFCI, however the old outlet has two black and one white wire. Two black are attached to one side and the white to the other side of the old outlet. Also there is no ground wire on the old outlet. I cant find this scenario addressed anywhere online. How would I install a GFCI in this instance? Thanks!

@kidbeanss4259 Год назад

So once I find head of circuit & gcfi it, all my 2 prong that feeds from it can simply be 3 prong regular outlets?

@izzyc6257 2 года назад

Good job and explained. God bless you

@FixThisHouse 2 года назад

Thank you so much! 🙏🏽😊

@JorgeMendez-qw8lx 2 года назад

Very helpful. Thank you so much.

@FixThisHouse 2 года назад

Thank you so much for watching! 🙏🏽😊

@johnrusso5046 2 года назад

I have 4 outlets in one bedroom, 1 is grounded the other 3 are not, can i put GFCI's in the 3 outlets that have no ground ?

@martinrascon8107 7 месяцев назад

Thankyou muchacho pot el video

@jorgep1 Год назад

My apartment has all non grounding type receptacles. Can I change out a few with gfci type receptacles or would I have to change them all out?

@KittyOfficiallyNotYo 5 месяцев назад

i watched a video where you can change one and run a wire off of that… but otherwise what i think i’m hearing is they have to all be changed to gfci according to code or safety

@rodolfodepuzo5310 9 месяцев назад

Can not give more thanks...❤

@caution_xray 2 месяца назад

ayos, pare 🤙🏽

@2DJeff_3DPrinting Год назад

Thank you, sir, for this video! It's been a few years since I've done this and you presented it very well! SUB'D 😁

@FixThisHouse Год назад

Thank you so much! 🙏🏽😊

@lin-oi4ej 2 года назад

Great video again, can you show us how to ground a plug if there ia none?

@Forged_Garage 2 года назад

Nice bro!!!

@FixThisHouse 2 года назад

Thanks brotha! 👍🏽😊

@laistephen754 2 года назад

I inspected a house built in the 50s with no ground plugs so I opened all the plugs and saw ground wire actually existed so I just replaced with plugs with 3 prongs and connected the ground wire too. I don’t know why in the old house they only used two prongs plugs when there was ground wires already existed. Maybe the electrician was being lazy or trying to save money just using two prongs plugs.

@jasmin0930 2 года назад

Thank you for this comment. My son’s home with built in the 50s and almost every outlet is two pronged and not grounded or so we think but your comment makes us wonder now. He’s new to DIY so these videos are great and so are the comments thank you again for posting one.

@surferdude642 2 года назад

My house was built in 1950 and had only 2 prong plugs. However, the metal boxes are grounded and bonded to the neutral wires at the electrical panel. The wires (16 AWG) are separate from the hot and neutral cable and are fastened to each metal box in the rear and on the outside of the box. If three prong receptacles even existed in the US they were pretty rudimentary, but electrical designers may have seen this coming. By 1969 they were becoming mainstream. I don't think the electricians were being lazy, it's more likely that the receptacles were not available.

@surferdude642 2 года назад

@@jasmin0930 One easy way to check for ground is to install a 3 prong receptacle and test it with a receptacle tester (about $7.00). Even without connecting a ground wire to the receptacle and if the box is grounded the receptacle will be incidentally grounded by contact with the mounting screws. The box must be metal. Alternatively, you could use a multimeter to verify if the box is grounded.

@jasmin0930 2 года назад

@@surferdude642 thank you Ted for some great information 🙏🏼🙏🏼🙏🏼

@iboman2003 2 года назад

My house is like this but the remodeled kitchen is like his mock up. All the 2 prongs have ground wires to the metal boxes.

@Trollfest23 2 года назад

I have an issue, it’d be great if you could help! I upgraded two two-prong outlets to three-prong Leviton GFCI outlets. One has green light on, works fine, the other one has no light, and it doesn’t work. I’ll refer to them as A (the one that works) and B (the one that doesn’t) from now on. So, when I RESET B, it turns red for a short moment and shuts off A. B still doesn’t work and is not RESSETable anymore. But I am capable of RESETing A, and then it’s all back to beginning. A works, B doesn’t. They are both in the same room, neighboring walls, I don’t know if they are in the same circuit or not. Any help would be appreciated, but this was very useful video, thank you! Definitely a new subscriber!

@nathanieldebruin 2 месяца назад

How do I know if I should use a 15 or 20amp gfci outlet?

@chuckyork6716 2 года назад

I notice you do not power up the gfci. Will a gfci even set/ reset without a ground. I'm not sure they will

@deanross4090 3 месяца назад

What do you do if you have a 70 year old house with no grounded outlets and the metal boxes are too small for a GFCI?

@jloza9840 2 месяца назад

How do you know or find out the one that’s feeding the rest of the outlets in a room? Thanks

@John-of6ch 2 месяца назад

A lot of times it is the outlet closest to the fuse box

@farfymcdoogle3461 Год назад

What if you NEED proper ground for your home studio? I’m really trying to figure this out, not the CGFI workaround.

@okaro6595 6 месяцев назад

Why would you need one? If you get hum the proper solution is to use galvanic isolators.

@DanielSmithE 5 месяцев назад

You used an adapter that removes the ground prong and then checked to see if the outlet was grounded. I think that would always register as "no", wouldn't it? I think you would have to use probes to determine that?

@MikeySocks 5 месяцев назад

It would show “no ground” any way cuz he tested it on a “no ground” outlet

@Dmitrytln 2 года назад

In 1930's code allowed to connect ground contact with neutral wire and too many people all over the world electrocuted themselves when neutral wire had poor contact in junction box or breaker panel. What is interesting, in Europe using neutral wire as ground was forbidden only in 1970's - you can imagine how much people was electrocuted during 40 years.

@okaro6595 6 месяцев назад

When you do it properly there is no risk. That is one reason why DIY is banned in Finland. I have reports of all deaths since 1980 and here is zero cases of spontaneously broken neutral or actually one but it happened to linemen outside so it would happen also on TN-C-S. On the other hand there were three deaths because DIYs connected the ground to the live wire.

@Dmitrytln 6 месяцев назад

@@okaro6595 DIY is banned in Finland because commercial companies want to earn more money. TN-C isn't safe even if you wire it properly.

@KittyOfficiallyNotYo 5 месяцев назад

so if i don’t have a ground, i have to use a GFCI. If i do have a ground wire somewhere, i can use a standard 3 prong outlet. Correct?

@John-of6ch 2 месяца назад

Correct

@Quetzachapin 2 года назад

What is the purpose to wrap the outlet with electrical tape? Does it have to be done every time?

@itzNickyJayBeats 2 года назад

Its debatable topic among DIYers and electricians. Most individuals will use electrical tape in a metal box to protect the conductors (I believe) and the screws which are also conductors; from hitting the metal on the box, causing a spark or possible fire hazard. Its not as important in plastic boxes. But I've also seen people not do it at all in metal boxes as well.

@FixThisHouse 2 года назад

Thank you for that! 🙏🏽😊

@FixThisHouse 2 года назад

Hi! wrapping electrical receptacles after wiring them to prevent movement of wires or the accidental contact with loose conductors or the sidewall of a metal outlet box. It's considered a “just in case” precaution, or sometimes just habit 👍🏽😊

@Bigmal23652 2 года назад

Electrical tape isn't a must. People use it in metal boxes .not to protect loose wires they should be tighten down to I think 22 psi

@arth.4196 2 года назад

Hi, How often due you have to get the necessary code book ?. Pleas

@FixThisHouse 2 года назад

I always just get the latest 🙏🏽

@jreffjeff7909 9 месяцев назад

What about unqualified and confident?

@vincentpereira8416 Год назад

So what happens when you have a outlet with just 2 hot wires to it and it's carrying 220v with no neutral and no ground wire

@okaro6595 6 месяцев назад

That is weird. Are you sure it is 240 V and not a very old 120 V outlet with horizontal slots? There are 240 V GFCI outlets. Check the code if it is allowed.

@tedlahm5740 Год назад

Kindly, PUSH the test button on the GFCI receptacle? Results please.

@jacktriper1941 Год назад

I used the new romax through house I grounded every receptiical

@MA-vm6jl 2 года назад

Can you also just change out the breaker and put on that is GFCI combo? This way all the outlets on that line are ground interrupted. Instead of changing out each outlet to a gfci

@FixThisHouse 2 года назад

No need to change out each outlet to GFCI. Just find the most upstream receptacle change that to GFCI and the rest downstream of the same circuit can be changed to a grounded receptacle. Make sure you label the covers with the appropriate labels 👍🏽😊

@vincentpereira8416 6 месяцев назад

It's a steel box and there is no neutral wire and the ground wire is not screwed into the box and its 220v

@clintstathis 2 года назад

How does a sticker make something up to code? There's still no grounding. Seems like a pretty half assed solution.

@FixThisHouse 2 года назад

The GFCI is the focal point on this solution 👍🏽😊

@SleepyKittens 2 года назад

I am assuming adding an adapter so you are able to use a 3-prong on a 2-prong outlet is worse than a more secure fit. All my basement outlets are 2-prongs and it really sucks to use an adapter, which in itself can be non-compliant. Grounding can be over-rated if you are not using serious juice, like a lamp,... but grounding is to prevent electric fires, which a GFCI does, so that makes it compliant.

@johncarbonetta7812 2 года назад

Agreed 👍

@okaro6595 6 месяцев назад

@@SleepyKittens No, grounding is to prevent electric shocks, nothing to do with fires.

@MichaelMantion 7 месяцев назад

FYI the level place linked is for a "3" pack NOT a pack of "33". You will only get 3. I saw the title and thought "that is a crazy good deal" and almost bought it. You are welcome to take a screen shot and argue with amazon, but its generally a waste of time.

@victorialowe3198 Год назад

Why do you cover the outlet with electrical tape ?

@okaro6595 6 месяцев назад

It reduces the risk of any wire touching the box. With a plastic box it is not so big a deal but if it is an ungrounded metal box that is more important. If the live wire were to touch the box it would energize the case of any connected equipment and the GFCI would not protect.