How To Replace Fuel Pump 2006-2012 Ford Fusion

Подписаться 469 тыс.

Просмотров 83 тыс.

50% 1

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFPU01638
Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 2006-2012 Ford Fusion.
• Check here for more videos on the 2006-2012 Ford Fusion: • Ford Fusion 2006-2012 ...
This process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pocket Screwdriver
• 10mm Wrench 1aau.to/ont/1AXAA00010
• 10mm Socket 1aau.to/oJn/1AXAA00017
• Air Blow Gun
• Trim Tool Set 1aau.to/opX/1AXXX00006
• Socket Driver
• Paper Towels 1aau.to/ohm/1AXSS00035
• Brass Punch
• Drain Pan 1aau.to/ogd/1AXAA00320
• Hammer 1aau.to/onP/1AXAA00091
• Pick 1aau.to/ojA/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: • Ford Fusion 2006-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

29 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@davidjsouth231 6 месяцев назад

I just did my daughter’s 2010 Fusion. Really easy. Solved my sputtering problem.

@electronrecycler1072 3 месяца назад

Getting those red pieces to disconnect the fuel hose from the fuel pump is proving to be extremely difficult without feeling like excessive force is needed / risk breaking it causing an even bigger problem

@johnquinn6865 Год назад

I would have started the car before refitting the Rear Seat Fuel Pump Cover Plate, just to make sure there's no fuel leaks from the hose connection.

@swaggakid00010 Год назад

Instructions come with speed and clarity thanks

@nathancarie9328 4 месяца назад

Great tutorial, quick and to the point. Thank you, brother. God bless you man.

@adolforodriguez7185 5 месяцев назад

😭 this is so beautiful, I had to cut the floor of my Camaro to get to it but this is so easy it made my day

@michellep5933 3 дня назад

We are debating if you are working on the driver's Side of the back seat or the passenger side of the Back seat??

@JuanCarlosNieves 11 месяцев назад

Best videos ever dude, thanks!

@robertcunningham9626 10 месяцев назад

Interesting I always thought that you had to remove the fuel tank to get to the fuel pump if it was an internal item. Also no mention of the filter but I guess that was included with a new pump. Great job of thoroughly explaining it to a non-mechanic.

@MrTreetrevino Год назад

Thank you

@berrihill2750 Год назад

Thanks so much.

@robertgolden3326 2 года назад

Thank you, very professional, great tips!!!!

@travisjohnston6411 Год назад

The fuel pump that you linked in description, did not come with a connection on the bottom for the line in the tank, does that mean it won’t work? Because the fuel pump you replaced had that connection at the bottom of the fuel tank. Will I need to return this pump, or will it work somehow? Please get back with me asap, I am supposed to be changing it out in a couple hours.

@jeffreygoss8109 2 года назад

Thanks!

@joshherrin9209 Год назад

Replaced pump to 2006 Ford fusion awd it still has same problem. Injectors are fine, but won't read any fuel pressure on rail. Car still start runs and drive with very little power... In gear and in idle it shakes vigorously as well as steering wheel. I'm starting to think fuel pressure regulator but it's usually on or by the rail... I can't find it and I didn't see the fuel pump or housing have one either.

@robertodeoliveira7432 2 года назад

Good job 👍👏👏👏

@purpledoge4466 Год назад

would the fuel pump on the awd 2012 ford fusion se work on the front wheel drive version??

@ethanroth1718 Год назад

It could very well work. Make sure they are both a v6, or I4. Even if they’re different engines sizes they could work, I’d call a dealership and ask

@benjaminsisko7564 10 месяцев назад

Wow, This I can do myself without a mechanic. lol

@mual4196 2 года назад

I have ford fusion se 2.5 2017, is the fuel pump located in the same place, please

@mrfan1819 Год назад

Yes it located in the same place

@5818lopser 2 года назад

Does anyone knows where I’d the fuel pump module? 2010 fusion 3.0

@ENVY____ Год назад

same spot. its the same car

@kriswoods1927 Год назад

Should say in the title if it's the v6 or 4 cylinder

@G.D.S-t3rrio 2 года назад

Im confused im trying to do mines but you didnt show how to turn the top piece you just got a hammer and hit it and it popped out

@levimays55 2 года назад

Did anyone else notice the yellow toy car that was revealed when he removed the back seats?

@davidcoleman9304 2 года назад

How do you replace the fuel sender on the right side of the tank? My 2008 MKZ AWD has another sender under the cover on the driver side, under the seat.