How to Replace Radiator 2002-2009 Chevy Trailblazer

Подписаться 464 тыс.

Просмотров 39 тыс.

50% 1

Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARAD00795
Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle. This video shows you how to install a new TRQ radiator in your 2002-2009 Chevy Trailblazer.
This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/od/1AXAA00013
• Pry Bar 1aau.to/od/1AXAA00020
• 10mm Socket 1aau.to/od/1AXAA00017
• 13mm Socket 1aau.to/od/1AXAA00015
• Fan Clutch Wrench
• Trim Tool Set 1aau.to/oa/1AXXX00004
• Adjustable Wrench
• Hose Clamp Pliers 1aau.to/od/1AXAA00076
• Pliers
• Ratchet 1aau.to/od/1AXAA00016
• Socket Extensions 1aau.to/od/1AXAA00015
• Cloth Rags 1aau.to/od/1AXSS00035
• Drain Pan 1aau.to/od/1AXAA00320
• Funnel 1aau.to/od/1AXAA00310
• Hammer 1aau.to/od/1AXAA00091
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Chevy Trailblazer 2002-2009 1st Generation: • Chevy Trailblazer 2002...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

7 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@TRQ 2 года назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@espeterson522 Год назад

What were the engineers thinking when they designed this? Replacing a radiator shouldn't be this involved.

@kerrysmythe4506 Год назад

This is an excellent video. Direct, and informative. Very easy to follow. You did a very fine job with this video. Thank you very much for taking the time, and effort, to assist us do our own work. I am a disabled veteran, and on a fixed income, thus it is imperative for me to do my own work. This is perhaps the best, if not certainly one of the best videos for DIY.

@kerrysmythe4506 9 месяцев назад

You explained this very, very well, and in layman's terms. Thank you.

@TRQ 9 месяцев назад

+Kerry Smythe Thanks for the feedback! 1aau.to/m/Shop-TRQ

@jasonbrown467 5 месяцев назад

i have done this many times on my tb, but i like watching videos like this before hand so im know what im getting into again. the hardest part for most people is that fan clutch bolt. i have never seen that tool that you used.

@Rebel9668 11 месяцев назад

I replaced the radiator as the coolant recovery line was broken at the fill neck and noticed while it was out that the water pump had some play in it so I replaced it as well, as well as the thermostat since I already had as much out as I did. I noticed when you put the transmission lines back into the radiator that you didn't put those metal clips back in. Are they necessary?

@marvgartman748 Год назад

Replace clips on transmission lines?

@OGVYpuRR 8 месяцев назад

What about the clips at the bottom that you took off of the transmission lines?

@donovanmccallum3934 2 года назад

thanks man, helped me get it done in one night

@jackiehope4237 13 дней назад

Can you get the fan clutch out in and out without using an air hammer? And just by using a wrench? Thanks!

@PSmith-tn2ck 3 месяца назад

How did you get the condenser out of the slots of the radiator?

@macjram40 7 месяцев назад

Thanks, you saved me some bucks

@Ford4life885 2 месяца назад

The issue I have with mine is the transmission cooler lines I can’t get the clips out

@axenik 11 месяцев назад

Looks like everything else but the original radiator needed replacing 😅

@moody2924 4 месяца назад

Job here went well,,,thank ya sir

@putraairhitam6742 26 дней назад

Mas mobil saya compressor baru ganti 3 bln tapi sudah gk dingin lagi.. Kira" apanya ya mas.. Trailblazer juga

@leyhuezeyhur1440 Год назад

Those 2 bushings on the bottom of the radiator, any idea where to order replacements?

@macjram40 7 месяцев назад

Thanks

@itsamirofficial_1996 9 месяцев назад

great 😍😍😍😍😍

@trojandrofdaw7109 Год назад

Shitty design. Water pump hooked to the fan clutch is silly. Having to remove grill is silly. I replaced my mothers Isuzu Ascender 4.2 ( same as a Trailblazer inline 6 4.2) radiator and water pump and hoses and belt That was 6 or 7 years ago. It sucked. Will need to replace radaitor again soon, small leak. Might as well do water pump again. Cant reuse water pump bolts according to the manual but can't find right bolts either so ??