So much easier having installed an electric fan with enclosure. No fan clutch or shroud in the way right outta the gate. Cuts install time by over half. Tip: I usually will replace the serpentine belt at the same time just to be proactive.
I'm gonna try this single mom not a mechanic but I'm confused w the cleaning and the draining as it wasnt in the video I wonder if I can do it myself of I get the tools n parts
I'm getting ready to do this same job...I noticed you didn't use a torque wrench if I can do the job without one that would be great...how tight can I safely tighten the waterpump bolts without breaking any.....thanks..your video was a big help...
All you should need is the new water pump, and some basic tools. the hardest part might be getting the fan off the water pump. there's some special tools you can rent from Autozone that can help you and they're free to rent.Or you can use a hammer and chisel to tap it like I do in the video to remove it. just make sure all the mating surfaces are extremely clean before installation, good luck!
Is there anybody ever tried to do this without taking all that stuff out of the way I’m gonna try it on my daughters to change the water pump without taking none of that stuff off all gonna do is drain the antifreeze and take the fan off and lay it up by the radiator and then change the water pump I really truly think there’s enough room I think you guys are tearing too much apart but we’ll see