How to replace tapered wheel bearings & races on your classic Ford Mustang

Подписаться 11 тыс.

Просмотров 12 тыс.

50% 1

Check out Alf's Mustang Parts on Amazon www.amazon.com/shops/mustangalf
Things I used in this video. As an Amazon Associate I earn from qualifying purchases
Wheel Bearing race installer amzn.to/2NzkGS9
Wheel bearing grease packer amzn.to/39X0Ibt
Seal remover tool amzn.to/363n2Pm
Air hammer kit amzn.to/3a1Eg0P
GoPro Camera & accessories amzn.to/2NwysVu
Lighting set up amzn.to/3ph54R2
Basic mechanics tool set amzn.to/3ob7q2B
Subscribe to the channel and click on the notification bell. / @alfsmustanggarage
We want your thoughts and comments below. What kind of project are you working on? What Mustang are you daily driving?
Today at Alf's Mustang Garage we install new front tapered wheel bearings and races into a 1966 Ford Mustang's front wheel drum.
Alf's Mustang Garage is not responsible for any mechanical or technical error that you may encounter when working on your own car. You are responsible for your own quality control and your own proper repairs.

Авто/Мото

Опубликовано:

6 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@AlfsMustangGarage 3 года назад

We are here to keep your classic Mustang on the road and out of your garage. Subscribe to the channel and click on the notification bell. ru-vid.com/show-UCZi2JnDfxDHwqJoxJzFnIlA

@siliconvalleyengineer5875 9 месяцев назад

You did a fantastic tutorial of how to replace and install bearings

@AlfsMustangGarage 9 месяцев назад

Thank you!

@siliconvalleyengineer5875 2 года назад

you did a fine job of explaining the process

@AlfsMustangGarage 2 года назад

Thank you!

@CruisinComPTon Год назад

I just did this yesterday with a hammer and screwdriver. That didnt work so after trying with many other objects I finally was able to take them off with a punch. I need to get an air hammer👍

@AlfsMustangGarage Год назад

Oh dude, the air hammer is the real deal! Makes life much easier.

@Richard-kz2om 7 месяцев назад

Good video!!

@AlfsMustangGarage 7 месяцев назад

Thank you!

@DavidLee-vu2bc Год назад

Having never worked on drum brakes or bearings...I think you saved me a headache. base on what I'm watching, I see why my front drivers side wheel will not hardly turn....it appears the inner wheel bearing is in backwards on my 56 Mercury.

@AlfsMustangGarage Год назад

Glad to hear you got it figured out. Very strange to see something like that in backwards. But that, I would fix that and then see how she turns.

@DavidLee-vu2bc Год назад

@@AlfsMustangGarage Again, thanks so much for the video. I dug back into the front drum (after your video) and found out that inner bearing was in correctly, however, the seal was shot and not pressed down (it was barely sunk in)...I lightly pressed the seal down so that it was seated correctly. I also readjusted (pulled in the drum pads in) brakes and added some brake fluid (it was a little low). It spins freely and for a short drive up and down the driveway it appears all is good. RU-vid to rescue!!

@brokah09g 3 года назад

My brake drums look just like the ones in this video, the ones that I ordered do not have the studs or the hub built in I cannot find the drums that you have in the video to buy from the usual sources. I think that I am missing something and hope that you can help.

@AlfsMustangGarage 3 года назад

So the drums for the 9" 4 lug which I assume you have, you can round up everything from National Parts Depot. The hub part # is 1102-2A. They also have the studs, part # 1107-1 and drums, # 1102-1. You might want to double check everything but that's what it looks like. I've also got all that from AutoZone minus the hub if you would rather work with local parts guys. Makes returning easier if it's not quite right.

@brokah09g 3 года назад

@@AlfsMustangGarage So the hub and the drum are two separate parts that have basically rusted together into 1 piece?

@AlfsMustangGarage 3 года назад

Yes. Either they are kind of stuck together or some I've seen where the lug stud stakes through the hub and drum and thus holds together

@brokah09g 3 года назад

@@AlfsMustangGarage I think that is what has happened with mine. I am glad that I asked and am extremely thankful for your help. I am on NPD right now ordering the parts.

@AlfsMustangGarage 3 года назад

You're very welcome. I'm glad I can help. You can probably get your bearings and hub seals too. I would assume they have them