Тёмный

How to Replace Water Pump 00-03 Chevy Suburban 

1A Auto: Repair Tips & Secrets Only Mechanics Know
Подписаться 2,4 млн
Просмотров 306 тыс.
50% 1

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEWP00066
1A Auto shows you how to repair, install, fix, change or replace a broken, bad, or leaking water pump. This video is applicable to the 00, 01, 02, 03 Chevy Suburban
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oW3/1AXAA00013
• Complete Metric Socket Set 1aau.to/omr/1AXAA00043
• Trim Tool Set 1aau.to/ojU/1AXXX00004
• Adjustable Wrench
• Channel-Lock Pliers 1aau.to/oaD/1AXAA00139
• A Piece of Pipe (for leverage)
• Ratchet 1aau.to/oXV/1AXAA00016
• Socket Extensions 1aau.to/oMM/1AXAA00015
• Torque Wrench 1aau.to/opw/1AXAA00044
• Brake Parts Cleaner
• Paper Towels 1aau.to/ofe/1AXSS00035
• Drain Pan 1aau.to/oeA/1AXAA00320
• Floor Jack 1aau.to/onX/1AXAA00068
• Jack Stands 1aau.to/on8/1AXAA00065
• Large C-Clamp
• Razor Blade / Gasket Scraper 1aau.to/obe/1AXAA00280
For More Info visit us at 1aau.to/h/aF4/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

1 мар 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 177   
@1AAuto
@1AAuto 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@eazhar
@eazhar 3 года назад
(Like and subscribe)
@brianbellin5245
@brianbellin5245 4 года назад
I have 263k on my Suburban changing the water pump for the second time. Last one survived 90k, its was a refurbished. You have no BS videos that give you the info needed.
@millionairefinesse5014
@millionairefinesse5014 6 лет назад
I feel ASE certified when I watch you guys video. Great, very well explained video!
@PeterB12345
@PeterB12345 3 года назад
For holding the fan to allow removal... Chevy Service Manual suggests taking the belt off and using a strap wrench to hold the pulley. You can get em in the plumbing section of any big box store and they use a rubber strap which holds nice and tight without marring the surface.
@twistedluck3120
@twistedluck3120 4 года назад
C clamp trick is AMAZING and the easiest way I’ve ever done this! I didn’t have a rubber one so I took the rubber boot of a crutch and but it over the pad of the clamp and it worked great! This has always been the most frustrating part of this job but this method has it done in two minutes literally
@robertkirschner3519
@robertkirschner3519 6 лет назад
This was a great video. Very informative and easy to follow. Was able to replace my water pump, ac belt and idler pulley, tensioner pulley and a few more items. Even told how tight to tighten up the bolts. Watching this gave me some xtra confidence to do it my self. Probably saved me 2-3 hundred in labor. Thanks
@Airmanmx1
@Airmanmx1 4 года назад
Pro Demand dictates Water pump bolts 2 stage torque sequence. First pass 15N.m or 11ft-lbs 2nd pass 30N.m or 22ft-lbs
@supersonicx01
@supersonicx01 2 года назад
Thanks 1A auto team. This video was extremely informative and helpful. I just finished installing my water pump yesterday, after a small hiccup today (thermostat housing gasket) I was able to complete the swap. But also found out there are 2 kinds of serpentine belts made for this model. They differ in amps. A 105 alternator amp and a 130 amp alternator. The difference is literally just an 1in and a half.
@G_Vegas22
@G_Vegas22 6 лет назад
Thank you for this video! I took a wire hanger routed in holes on water pump and tied it to altenator bolt.
@mikewhite3123
@mikewhite3123 5 лет назад
Soon as he said 10mm I knew I was in trouble....
@HemiLyfestyle
@HemiLyfestyle 4 года назад
😂😂 that's the one thats always lost
@TheYammerHammer
@TheYammerHammer 3 года назад
I just lost mine in the fire wall 🤦‍♂️
@The_Real_Indiana_Joe
@The_Real_Indiana_Joe 3 года назад
I had a 2 liter. Only metric thing in the whole house.
@IcemanGaming337
@IcemanGaming337 3 года назад
@@TheYammerHammer my heart breaks for u man lol
@category.m4575
@category.m4575 Год назад
😂😂
@weekndwarriorsreallyouchea7051
Great tip with the C clamp. Was pulling my hair out
@cjas2921
@cjas2921 3 года назад
Yeah, so was I
@TheYammerHammer
@TheYammerHammer 3 года назад
First time I seen this trick
@jacobgonzales2128
@jacobgonzales2128 7 лет назад
Thanks a lot I used this video helped me change out my water pump with no hassle. Greatly appreciated
@1AAuto
@1AAuto 7 лет назад
+jacob gonzales Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/engine-water-pump/i/1aewp00021?RU-vid&CTA+Comment&XGmZL0i6Q
@danasmith9345
@danasmith9345 5 лет назад
Hey Thanks for the Video. being youtube educated pays off these days. got it all done in about two hours
@1AAuto
@1AAuto 5 лет назад
+Dana Smith Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/engine-water-pump/i/1aewp00021?RU-vid&CTA+Comment&XGmZL0i6Q
@chadly1337
@chadly1337 3 года назад
@@1AAuto this link is dead :(
@williammoloney
@williammoloney 6 лет назад
Thank you 1A Auto Parts for another great video. Your videos are the best. The C clamp trick worked perfectly. Very easy job.
@1AAuto
@1AAuto 6 лет назад
+William Moloney Thanks for checking us out. 1aauto.com
@jamiewoods9222
@jamiewoods9222 4 года назад
Great video. I've got to change mine. Reason for me watching. So thanks for the video.
@billbarscdhorf1457
@billbarscdhorf1457 6 лет назад
Excellent video very well explained, I feel confident to take this on.
@1AAuto
@1AAuto 6 лет назад
+Bill Barscdhorf Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
@Heisenbrick
@Heisenbrick 4 месяца назад
This looks easier than I thought, and I really lucked out, I have an 05 It uses electric fans. No big shroud either. I have about eleven inches of space to work.
@joshuadunbar4104
@joshuadunbar4104 5 лет назад
make sure you clean your pulleys of because if you don't your spilt antifreeze will make your belt squeak!
@1AAuto
@1AAuto 5 лет назад
+Joshua Dunbar Thank you for your feedback!
@ChevySS1968
@ChevySS1968 2 года назад
Great vid, thanks. I am doing this job today. Going very smoothly, thanks to these tips.
@rr3102
@rr3102 6 лет назад
Great video, that c-clamp trick is awesome. Thanks!
@1AAuto
@1AAuto 6 лет назад
+rr3102 Thanks for checking us out. 1aauto.com
@andremcdaniel368
@andremcdaniel368 5 лет назад
awesome vid...thanks u just saved me about 500 bucks...
@1AAuto
@1AAuto 5 лет назад
+Andre Mcdaniel Thank you for the great reply! We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@condor5635
@condor5635 5 лет назад
Great video - great opportunity to replace hoses when doing this job. Upper, lower and two heater hoses are easy to replace and if they are old will save you a lot of time and headache down the road. I have the same vehicle - looks so familiar. Thanks for the video!
@1AAuto
@1AAuto 5 лет назад
Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c +condor5635
@sukafreecity
@sukafreecity 5 лет назад
Great detailed tutorial!!..Very professional!
@1AAuto
@1AAuto 5 лет назад
+SukaFreeCity Thank you for the feedback!
@ericbutler9870
@ericbutler9870 6 лет назад
You have replaced just about every thing on that suburban!
@acelious
@acelious 4 года назад
can you make a full on detailed video on how to access the timing cover im trying to replace my oil pump but im lost
@RYTHMICRIOT
@RYTHMICRIOT 2 года назад
For awhile now I'd get a "low coolant level" message on my dash once every 3 months or so. I could never find a source of a leak anywhere and simply topped of the fluid. Winter and snow have just hit where I live and all of a sudden I'm getting the low coolant message every couple of days. Still couldn't find any leaks. Now, I have started getting periodic belt squeal. I looked underneath my truck with the engine running and can see water running down my timing cover. The engine block is wet directly behind my waterpump. I believe this has been the culprit all along. I will be changing out my waterpump tomorrow. Thanks for the video.
@1AAuto
@1AAuto 2 года назад
+RYTHMIC RIOT Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@josemiranda6300
@josemiranda6300 6 лет назад
Thanks alot !! Saved me money. Learned alot from 1A Auto . Keep it up . Thanks again
@1AAuto
@1AAuto 6 лет назад
+Kuko yabish Thanks for watching. 1aauto.com
@ryanbogan2046
@ryanbogan2046 6 лет назад
Kuko yabish the I'm
@TokenTombstone
@TokenTombstone Год назад
Great! The c clamp on belt is a great tip.
@LeadDennis
@LeadDennis 6 лет назад
Thanks so much for your effort on these youtube videos.
@1AAuto
@1AAuto 6 лет назад
+LeadDennis Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
@lyndonk2407
@lyndonk2407 3 года назад
As always Thank you 1A auto.. 👍🏽
@lknkjbnh
@lknkjbnh 6 лет назад
Saved me money, and very great instructions thanks
@1AAuto
@1AAuto 6 лет назад
+Ron Aguil Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/engine-water-pump/i/1aewp00021?RU-vid&CTA+Comment&XGmZL0i6Q
@shawnferrell1983
@shawnferrell1983 3 года назад
I freaky love 1aauto it help me with so many projects
@1AAuto
@1AAuto 3 года назад
+Shawn Ferrell Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@559043
@559043 2 года назад
best video for this job . thanks 1A
@fzintzun
@fzintzun 5 лет назад
Great Video. The pulley on my water pump started chirping every so often last week but I thought it was the belt getting wet from all the rain we had. Well the chirping became constant yesterday and this morning I noticed a lot of antifreeze on the ground. Opened the hood and saw the chirping was coming from the pulley on the water pump every time it wobbled. I’m guessing the fluid came out near the stem. Anyway I hope that was my only issue because I changed my water pump with your help. Thank you!
@1AAuto
@1AAuto 5 лет назад
+fzintzun Thank you!
@robertduran1945
@robertduran1945 4 года назад
Perfect video for do-it-yourselfers auto shops are hungry and charge you a pretty penny my friend had money and the auto shop would work on his car right away he said why cuz I know I want to eat steak tonight
@1tom35
@1tom35 2 месяца назад
Letting coolant get onto belts is a guaranteed belt squeak. So if you aren't replacing them, definitely remove before getting coolant in them!
@vybelyfe5837
@vybelyfe5837 11 месяцев назад
Gotta help my buddy change his waterpump. It's leaking and the pulley is faulty causing his belt to pop off. Great video!
@mikedavis5177
@mikedavis5177 6 лет назад
Great video, as all 1AAuto how-to-videos are, so I went to 1AAuto website and ordered the part, unfortunately the thermostat and housing did not come with it so had to order separately. Video said it came as a kit. Also the packaging of the water pump was very poorly done. In a big box with no bracing to prevent pump sliding all over the place in-transit. Inside of box had lots of tears in it. Also the mounting surfaces of the water pump had lots of scratches on it. Hope the gaskets provided take care of it.
@1AAuto
@1AAuto 6 лет назад
+mike davis If you have issues with the parts you ordered please contact our customer service department at 888-844-3393. One of our representatives will be more than happy to help! www.1aauto.com
@803Dray
@803Dray 5 лет назад
1A Auto Parts always comes through with their videos and parts! Time to replace mine for the 2nd time after about 60k miles. For some reason my water pump only leaks after the engine has cooled off.
@1AAuto
@1AAuto 5 лет назад
+803Dray Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@jay225br
@jay225br Год назад
I’m changing mines today I’m having the same issues I a can drive 100 miles a day but when I get home it leaks overnight from the weep hole it’s strange
@cjas2921
@cjas2921 3 года назад
Great video! You guys have helped me so much. Thanks!
@1AAuto
@1AAuto 3 года назад
+C Jasper Thanks for checking us out and the positive feedback! 1aau.to/m/Shop-1AAuto-c
@rjhardcore3
@rjhardcore3 5 лет назад
Thanx very helpful
@lyndonk2407
@lyndonk2407 3 года назад
Thanks for the Video.👍🏽
@sean.g4516
@sean.g4516 7 лет назад
great video I'm doing mines tomorrow, jst looking to see who does it differently, but that's the same method I'm using
@1AAuto
@1AAuto 7 лет назад
+Derrence Golden Thank you for watching. We hope your replacement goes smooth and operation of your vehicle gets back to normal!
@sean.g4516
@sean.g4516 7 лет назад
What type of gasket sealer did u use
@CKMocker
@CKMocker 6 лет назад
thx, worked like a charm!
@1AAuto
@1AAuto 6 лет назад
+CKMocker Thanks for checking us out. 1aauto.com
@jamesbailey7785
@jamesbailey7785 4 года назад
Another fan remove idea. I just grab a cpl small bolts and stick in 2 holes in fan pulley, then a lrge screw driver to hold in place as wrench off I believe 22 MM fan nut.
@1AAuto
@1AAuto 4 года назад
+James Bailey Thanks for the feedback!
@lopezp3718
@lopezp3718 5 лет назад
Thanks for da video. I can do it by my self now.
@1AAuto
@1AAuto 5 лет назад
+Lopez Lopez Thank you for the reply! We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@abasologto671
@abasologto671 2 года назад
A nice video man helps a lot. but I have one question. that you use any silicone or like gasket maker when you install the new water pump?
@jimpeterson6564
@jimpeterson6564 4 года назад
So no gasket or silicone on the thermostat housing? Thank you, great video.
@Ladco77
@Ladco77 4 года назад
Some use a gasket and some use an o-ring. The one in this video uses an o-ring.
@AllenBoxingClub
@AllenBoxingClub 4 года назад
Thank you so much! Big help
@1AAuto
@1AAuto 4 года назад
+AllenBoxingClub Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@lyndonk2407
@lyndonk2407 3 года назад
Thanks for the video. When the water or gasket fail. Will it leak up to oil pan?.
@getsudatensho
@getsudatensho 4 года назад
Great video thanks for the c clamp trick thats the part that had me going nuts the rest after that is a piece of cake
@1AAuto
@1AAuto 4 года назад
+Victor Aguilar Thanks for checking us out! 1AAuto.com
@wesleyjaspers2047
@wesleyjaspers2047 3 года назад
Yea the c clamp is great I'm just gonna start taking mine and being hands on to the point that you don't want to ride in my car anymore cause if it's just a little bigger like a suburban trust me the Tahoe's better don't think that's enough to really get her going cause all I gotta do is get right and believe me I can make her mine don't doubt ....
@___Marissa___
@___Marissa___ 3 года назад
I've checked both side of the radiator and there is no drain hose. I see the release twist knob to release but again no hose.
@ke9527
@ke9527 5 лет назад
Great video. Thanks
@1AAuto
@1AAuto 5 лет назад
Thanks for checking us out. 1aauto.com +K E
@nealparler1980
@nealparler1980 6 лет назад
Thanks I did the same change out on my 2000 Z71 5.3, but had a strange event happen while recharging the water, the heater core over flow under the AC accumulator constantly pour the wate out that i was putting the radiator??? HELP PLEASE THANKS
@ronaldjennings9221
@ronaldjennings9221 Год назад
Best way to remove the fan clutch that I've ever seen. Always very stubborn.
@1AAuto
@1AAuto Год назад
+Ronald Jennings Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@dannyfubar3099
@dannyfubar3099 4 года назад
Excellent Thank You!
@1AAuto
@1AAuto 4 года назад
+Danny Fubar Thanks for checking us out! 1AAuto.com
@m00nchildblues
@m00nchildblues 4 года назад
My new pump came w an O ring and paper gasket for the thermostat shroud, my existing one has neither, I planned on reusing thermostat. I cannot use new o ring but should I use the paper gasket? I also forgot to use gasket compound on pump gaskets, is it critical to use compound? Thanks
@josecabello6397
@josecabello6397 4 года назад
Thanks you
@bcso1747
@bcso1747 7 лет назад
thanks!
@derekmiller8106
@derekmiller8106 25 дней назад
So no retaning clips needed for the heater core hoses? Just the metal clamps? I was told i need retaning clips to prevent the hoses blowing off
@jeffreynobles948
@jeffreynobles948 4 года назад
Is it 11 ft. lbs on all the LS variant truck engines? I just replaced the water pump on my 2011 Camaro SS, and the first pass was 11 ft. lbs, but the final torque spec was 22 ft. lbs on the second/final pass. ALLDATA says 22 ft. lbs on the second/final pass. Not trying to contradict you, just trying to clarify for people watching this video.
@rogermerritt6470
@rogermerritt6470 Год назад
Great video. But I'm having some issues with getting that thermostat to fit into my water pump. I bought one that looks just like yours. Too tight a fit for it to enter pump. This 2002 suburban I have I acquired back in March seems to have a new pump on it, but during cold weather now the the motor never comes up to operating tempurature and now getting check light. I installed two thermostats from Oriellys auto and those thermostats have three raised ridges on top of them. Both did not do the job and I suspect those ridges are allowing coolent to bypass into the radiator and not allow the motor to get hot. Are there two different water pumps available for the 5.3L engine?
@levicallis459
@levicallis459 3 года назад
Did you throw the felt gasket on the housing , or just use the thermostat o ring ?
@floydkettle2469
@floydkettle2469 2 года назад
a guy gave me a 2003 tahoe for $500 with a bad water pump for part payment on a job i did. randy's auto in sidney neb. told him a $1000 to replace the pump. did a little patch job for another guy that paid for the water pump. thanks to your video it was so easy to fix. 230.000 miles on the tahoe sounds like new no ticking sounds at all. do you think i got a good deal? its super clean tires are almost new breaks were replaced last year and was well taking care of.thankyou you so much for helping me
@1AAuto
@1AAuto 2 года назад
+Floyd Kettle Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
@mikesmith8090
@mikesmith8090 2 года назад
I might be wrong but did you use a New serpentine belt as it looked like the old one? This is also a very good time to replace all the vehicles antifreeze as many of us know the stuff breaks down over time and it's not good for all the aluminum parts these motor's use if not changed, flushed etc. Otherwise great Video!!
@bentonsdrenchedwrenches5132
@bentonsdrenchedwrenches5132 2 года назад
Good vedio
@brysonsofele7658
@brysonsofele7658 6 лет назад
oooooohohhhhhhhh!!! okay! lmao cheers mate!
@TyHudson42
@TyHudson42 2 года назад
AWESOME VIDEO!!!!😎🖖
@1AAuto
@1AAuto 2 года назад
+Jesus Henry Christo Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@bigtush85
@bigtush85 5 лет назад
Mine came with metal gaskets from the water pump to the Engine. U guys recommend using gasket sealer?
@1AAuto
@1AAuto 5 лет назад
+Benson James Yes, you can use a spray gasket sealer to help hold the gasket in place while installing the water pump. Just follow all the instructions on the can.
@UncleSarkis
@UncleSarkis 3 года назад
Not necessary to put RTV on the bolts right? I've read in the forums others did, but I did not.
@yoz1967
@yoz1967 4 года назад
Do I have to use a one piece thermostat? I have a thermostat housing and a separate thermostat that I bought
@67manderson
@67manderson 3 года назад
Why not put the thermostat housing on before installation seems easier.
@joker90029
@joker90029 Год назад
No need to add rtv sealant to those gaskets on the pump and thermostat housing when installing?
@anthonyrathore5192
@anthonyrathore5192 Год назад
Those are fiber gasket you need to use gasket sealer on those if they are metal/o ring then you do don't use gasket sealer
@marcellpeterson129
@marcellpeterson129 3 года назад
in the list of stuff needed at the beginning you did not mention the new thermostat or housing for it. But later in the video you said to install the new thermostat and housing lol is this a necessity?
@jamespeach626
@jamespeach626 2 года назад
Usually people buy online to save money. I can get a water pump for an 01 suburban cheaper at every major parts store around me than what y'all are charging
@dmeads5663
@dmeads5663 4 года назад
Is this the same for an 04 Suburban?
@manoweb1
@manoweb1 2 года назад
You need to add a correction to your pinned description... You said in your video to torque waterpump to 11ft lbs! The THERMOSTAT HOUSING is torqued to 11ft lbs, BUT THE WATERPUMP SHOULD BE TORQUED TO 22FT LBS. DONE IN TWO STAGES 11FT LBS FIRST THEN 22FT LBS.
@angelmaro95ah
@angelmaro95ah 5 лет назад
This water pump with ac or without?
@austinfarace6881
@austinfarace6881 6 лет назад
You guys have another video on a GMC with a 5.3l in which you say to torque the pump bolts to 22-24ft/lbs. Which one is correct?
@Archangel0804
@Archangel0804 5 лет назад
My manual says its 22 lbs...you should first torque opposing bolts at 11lbs so that you don't twist the aluminum housing and then come back and do the same thing at 22lbs.
@BCSTOHR
@BCSTOHR 5 лет назад
I believe 11 ft/lbs is the initial torque and then 22-24 ft/lbs is final torque setting, for the water pump bolts, but the thermostat housing bolts are just 11 ft/lbs.
@1AAuto
@1AAuto 5 лет назад
+Austin Farace The torque specifications for this part is 11 ft/lbs initially and then a final pass at 22 ft/lbs.
@IsaacLopez-hj5hr
@IsaacLopez-hj5hr 4 года назад
@@1AAuto so is that the final pass that you guys didn't show in the video? 🤦🏻‍♂️ I guess I know what I'll be doing this weekend 😒...
@robertboyero3797
@robertboyero3797 5 лет назад
No gasket sealant on the pump to block or thermostat housing gaskets?
@1AAuto
@1AAuto 5 лет назад
+Robert Boyero The new part comes with gaskets for the inlet and outlet ports on the back. The thermostat has an o-ring gasket already on it as well! The part shown in this vehicle can be viewed and purchased here: www.1aauto.com/engine-water-pump/i/1aewp00021?RU-vid&CTA+Comment&XGmZL0i6Q
@Ktonrider
@Ktonrider 5 лет назад
I’m doing my water pump again on my Silverado, my question is it appears that the pump is in fact the issue again but the leak starts and stops (basically intermittent) what would cause a leak to be intermittent?
@WilliamJones-pl2hx
@WilliamJones-pl2hx 5 лет назад
Thermostat could be sticking shut.
@waynekoshiway8657
@waynekoshiway8657 3 года назад
Water pump torquing is 11ft lbs for first pass and 22 ft lbs for second pass 🤙🏽
@1AAuto
@1AAuto 3 года назад
+Wayne Koshiway Thanks for the feedback!
@busdriver1469
@busdriver1469 3 года назад
How much time did you spend on this job?
@trexmarc7
@trexmarc7 2 года назад
so, how long was the repair???
@SeriousMan21
@SeriousMan21 5 лет назад
What is the main part of the water pump that tends to leak? I have an 03 Chevy Avalanche with a terrible coolant leak, I'm having to pour in more coolant every 3-4 days and pools under the truck whenever it's parked. I haven't been able to trace down the exact spot that's leaking, but the water pump tends to be the cause of coolant leak
@1AAuto
@1AAuto 5 лет назад
+Nicholas Loe Thanks for watching! A water pump can leak from anywhere really. A lot of times it will be the main gasket that fails, leaking from hoses that aren't clamped down properly, the thermostat or the inlet and outlet tubes. 1aauto.com
@frederickcaldwell3414
@frederickcaldwell3414 5 лет назад
i had the same problem on my 2002 chevy avalanche 8100 vortec 2500 engine. i bought a new water pump, put it on & took it off twice. it kept leaking behind the water pump. i thought it may be a freeze- plug. but, it turned out to be the brand new water pump was leaking from the back, near the seal and the bolts on the back. Now, i'm waiting for a New Water pump to Arrive. This Problem Was Very Hard to find Because i didn't Believe that a New water pump Would Leak Fluid As Soon As The New Water pump Was Put On My Truck. I Hope This Answer Will Help You. Good Luck.
@jeremiahjohnson7329
@jeremiahjohnson7329 4 года назад
No RTV needed for the T-stat installation?
@HemiLyfestyle
@HemiLyfestyle 4 года назад
Now a day the T-Stat should come with a rubber gasket. Many people don't use RTV anymore because everything comes with a gasket
@risforreal4260
@risforreal4260 6 лет назад
Doing this on a 6.0 and am having trouble removing the fan. Tried the C-clamp method and the pulley still spins, any suggestions?
@1AAuto
@1AAuto 6 лет назад
+robert price Did you try a pry bar to prevent the pulley from turning? That may help out
@khohal
@khohal 6 лет назад
It is easy to remove water pump with fan still attached and then take it off once pulled out.
@frederickcaldwell3414
@frederickcaldwell3414 5 лет назад
a metal Tap & Hammer while still on the truck. Otherwise remove clutch fan & Water pump. Take to nearest Auto Shop. The Mech On Duty Will Be able to Loosen The Nut Within A Few seconds.
@addisoncox2557
@addisoncox2557 Год назад
no sealant on metal gaskets?
@Carlos-ip2ir
@Carlos-ip2ir 9 месяцев назад
Can you put the hours it takes to complete
@dizzydavid4668
@dizzydavid4668 3 года назад
We need an oil pump video
@1AAuto
@1AAuto 3 года назад
+David Morales We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
@dizzydavid4668
@dizzydavid4668 3 года назад
@@1AAuto i own a 2002 Tahoe so i enjoy watching when you guys work on the Suburban! Thank you!!!!
@staffordemery7857
@staffordemery7857 3 года назад
After changing your water pump how many gallons of antifreeze is needed to refill ?
@SecureBoxes
@SecureBoxes 3 года назад
Just over 4 gallons, I think it‘s 16.8 quarts
@brad9092
@brad9092 Год назад
How much coolant do I need to buy?… And, can I reuse the old coolant?…
@joeversus2893
@joeversus2893 3 года назад
One thing more I hate more than anything is GM hose clamps off they go! I go and pick up stainless steel one ones.
@condor5635
@condor5635 3 года назад
I don't believe this Suburban has what you call bypass valves going to the core. I believe the coolant runs through the heater core at all times and either goes in the cabin or is vented to the exterior via the blending door. The temperature control controls the amount of blending. No where on this vehicle have I seen valves. Great video. Thanks for posting
@1AAuto
@1AAuto 3 года назад
+condor5635 Thanks for the feedback!
@theofficialdiamondlou2418
@theofficialdiamondlou2418 9 месяцев назад
So if that blending door is jammed or frozen . You’d get hot air all the time ? Correct ?
@ohjay7962
@ohjay7962 2 года назад
No gasket sealant?
@DK-vx5co
@DK-vx5co 3 года назад
Video says t-stat is part of the kit, but the link says it has to be purchased separately. What up, Doc?
@1AAuto
@1AAuto 3 года назад
+D K It's possible at the time of this video it was sold together, but at this time we only sell it separately.
@IllestMFout
@IllestMFout Год назад
11 ft-lbs for the bolts 12:14
@meekdook4236
@meekdook4236 3 года назад
How do I know if the waterpump is going bad? What are the symptoms? 🤔
@1AAuto
@1AAuto 3 года назад
+Aerial Photos We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Some signs to look out for is a fluid leak, steam from your radiator or your temperature gauge not reading a consistent temperature or abnormally high. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@thebro5540
@thebro5540 4 года назад
I just checked online and the kit doesn’t come with the thermostat.
@benthere404
@benthere404 2 года назад
The torque specs for the water pump bolts in this video is wrong. You two step torque the bolts, 11lbs first then 22 lbs. He forgot the final torque sequence.
Далее
2003 Chevy Suburban Water Pump Removal & Install
17:10
How to Replace Thermostat 02-06 Chevy Suburban 1500
11:42
Наше обычное утро 💕
00:42
Просмотров 551 тыс.
УРА! Я КУПИЛ МЕЧТУ 😃
00:11
Просмотров 760 тыс.
How to Replace Engine Water Pump 00-03 GMC Yukon SUV
12:46
How to Replace Water Pump 00-04 Ford Focus
24:46
Просмотров 110 тыс.
HOW TO REPLACE INSTALL WATERPUMP GMC YUKON 2002-2006
11:24
tractor rear light project #project
0:40
Просмотров 14 млн
BMW vs Mercedes 😎🤣
0:12
Просмотров 2 млн