How to Setup Xbox Series X with LG OLED and AVR | 4K120Hz eARC Workaround C9 CX Denon & Marantz

Подписаться 130 тыс.

Просмотров 72 тыс.

50% 1

Today I show you how to setup the Xbox Series X with an LG OLED and a 2020 Denon/Marantz A/V Reciever. This is the eARC workaround everyone talks about but nobody has shown how to do. Never fear, Techno Dad is here! Tested HDMI 2.1 Cables - technodad.biz/HDMI21
Tested HDMI 2.1 Cables - technodad.biz/HDMI21
Discounted Denon AVRs - amzn.to/2NfNtXs
Discounted Marantz AVRs - amzn.to/2BFYNYb
Recommended HDMI 2.1 (8K) Cables - technodad.biz/HDMI21
Become a Patron!! bit.ly/TDPatreon
Check out the cool shirts at INTO THE AM: intotheam.com/TECHNODAD
Rent 4K Blu Rays at 4K Blu Ray 4U: bit.ly/TD4KBR4U
2020 4K TVs:
Samsung Q90T ON SALE NOW - technodad.biz/SamQ90T
LG CX OLED - technodad.biz/LGCX
Sony A8H OLED - technodad.biz/SonA8H
Samsung Q80T - technodad.biz/SamQ80T
Sony X950H - technodad.biz/X950H
Samsung Q70T - technodad.biz/SamQ70T
Lustre Links:
Best 4K TVs by Budget - my.lustre.ai/zAsG2
Best A/V Receivers by Budget - my.lustre.ai/ZiPBQ
Best Noise Cancelling Headphones - my.lustre.ai/qUgge
Best Portable Bluetooth Speakers - my.lustre.ai/NzeI6
Best Gaming Headsets - my.lustre.ai/YPsR3
Best Computer Monitors - my.lustre.ai/mB3gq
Try the Lustre Chrome browser extension for free - bit.ly/2zVrUt9
My favorite subwoofers: technodad.biz/REL
2020 Denon AVRs - technodad.biz/Denon2020
2020 Marantz AVRs - technodad.biz/Marantz2020
Monoprice subwoofers: amzn.to/33G8iD0
7-Channel AVRs: amzn.to/2DmnMBt
9-Channel AVRs: amzn.to/2PVf2Jl
4K HDMI Cables: amzn.to/2QCi3LW
Budget Range 4K TVs: amzn.to/2JLaf7X
Mid-Range 4K TVs: amzn.to/2zEqdfA
Premium 4K TVs: amzn.to/2qxoRPx
OLED 4K TVs: amzn.to/2R9DRC5
Sony 4K TVs: amzn.to/2QM5YqR
B&O Headphones: amzn.to/2RulKDG
Recommended Soundbars: amzn.to/2SVutDV
DISCLAIMER: This video and description contain affiliate links. As an Amazon Associate, I earn from qualifying purchases.
Check out my recommended products on Amazon: www.amazon.com/shop/technodad
Equipment used to film & edit:
Panasonic GH5: amzn.to/2DteYKZ
Panasonic 12-35 mm f2.8 lens: amzn.to/2PMiPsx
Panasonic 42.5 mm f1.7 lens: amzn.to/31VGg50
Sachtler Flowtech 75 Tripod Legs: amzn.to/2KSyqDI
Manfrotto 504HD Video Head: amzn.to/320tzFU
Edelkrone SliderOne V2: bit.ly/2Pbvk1L
Edelkrone SliderPlus: bit.ly/2Pky0KC
Edelkrone HeadOne: bit.ly/2ZnsxWR
Edelkrone DollyOne: bit.ly/33TKHPK
Edelkrone FlexTILT Head 2: bit.ly/2Pkyr7I
Atamos Ninja Inferno 7" HDR Monitor: amzn.to/2N3pM6k
Portkeys BM5 Monitor: amzn.to/2Z8RI09
Tilta Nucleus Nano: amzn.to/2TUKsiK
Godox LED Video Light: amzn.to/2Zbf2dD
Rode NTG-2 Shotgun Mic: amzn.to/2pxXwj7
Rode Procaster: amzn.to/338cfjA
Rodecaster Pro:amzn.to/2NtK7Rg
Zoom H6 Handy Recorder: amzn.to/2NzSUku
MacBook Pro - www.jdoqocy.com/click-8786448...
iPad - www.jdoqocy.com/click-8786448...
Mac Mini - www.dpbolvw.net/click-8786448...
iMac - www.dpbolvw.net/click-8786448...
Thank you for watching!
Don't forget to like and subscribe!
Facebook: bit.ly/TD5FBP
Twitter: bit.ly/TD5TWTR
Instagram: bit.ly/TD5INSTA
Spotify: bit.ly/CDS29YrsS
Soundcloud: bit.ly/DJCDSSC55
Techno Dad Audio Demo Tracks - Tidal: bit.ly/2IxZzKO
Techno Dad Audio Demo Tracks - Spotify: spoti.fi/2Rnv4dv
0:00 - Start/Intro
1:13 - eARC Workaround
1:29 - Patreon Shoutouts
1:48 - Equipment Used
2:42 - Physical Connections
3:29 - ARC/eARC Explained
6:14 - Series X 4K120Hz Settings
7:42 - Series X Dolby Atmos Setup
8:39 - Blu Ray Player Atmos Setup
9:36 - Signal Verification
10:17 - eARC/ARC LG Setup
11:25 - eARC/ARC AVR Setup
12:12 - eARC/ARC Verification

Наука

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 517

@sergiovasquezjr4205 2 года назад

I consider myself pretty tech savvy and generally good at connecting equipment. Your video helped me troubleshoot an issue and I am most thankful that I now get to enjoy dolby atmos as intended.

@TechnoDad 2 года назад

Hi, Sergio! I'm glad I could help!

@spencermisetich2681 Год назад

@Techno Dad agreed thanks so much for this. Completely fixed the issues I was having trying to connect my new soundbar to my Series X. Thanks!!!

@douglasgage5138 2 года назад

Thank you so much for this video. I spent several hours trying to get all the settings correctly set up but I was missing several on my Marantz NR1607. Now I am gaming in glorious 4k/120hz with my TCL 646 and my NR1607 connected to my Xbox Series X. Your video walked me right through all the settings easily the first time. I powered off/on to be sure and up popped all the notifications on my screen and receiver display. 4k/120hz. HDR10 and Dolby Atmos. Perfect.

@TechnoDad 2 года назад

Nice! I'm glad you found my video, Douglas!

@DabuZugZug 3 года назад

Fantastic video, clear explanation, easy to follow. Great job Techno Dad!

@TechnoDad 3 года назад

Thank you, glad you enjoyed it!

@mikeyroos4229 3 года назад

I can't wait to get all this up and running, been a goal for a long time now. Have my 77 CX coming in the next week or so and the atmos ceiling speakers installed around then as well. This video was very helpful, thanks very much! I've got a great wife for putting up with my obsessions when it comes to gaming and home theater 😁😁

@TechnoDad 3 года назад

Best of luck! Let me know if you need any more help!

@erikwsince1981 3 года назад

Thanks for this! I’ve got a LG 55 CX and Marantz SR5015 on the way! Can’t wait to get them all setup together.

@TechnoDad 3 года назад

Nice!

@izehumaheyiba2182 3 года назад

@@TechnoDad is your Audio Receiver on Surround Sound 5.1?

@nickchaviano7396 3 года назад

This was so helpful getting everything setup. Cannot thank you enough!

@TechnoDad 3 года назад

Glad I could help, Nick!

@h2ohamer271 9 месяцев назад

Great Video. When someone knows what they talking about , the video just flows and simplifies things :)

@ThreeStormFitness 2 года назад

I was bummin' pretty hard about the sync delay with my Series X / LG C9 / Denon AVR / 5.1.2 set up. Followed this video (I admit I wasn't optimistic), and it worked perfectly...I had done everything, except didn't toggle eArc and pass through on the TV (I set it to use eArc as the source, but that wasn't complete enough)...that did the trick! Thanks for solving my 1%'er problems, Techno Dad!

@TechnoDad 2 года назад

AYYYYY!! I'm glad my video helped.

@toobrew7956 4 месяца назад

Hi, sorry I know this is from 2 years ago but I am just about to pull the trigger on a Denon AVC-X6700H and I have same LG C9 as you. I recently saw a video on Digital Foundry where they are discussing the Atmos delay on Xbox and how it was unbearable to use so they reverted to DD. Is this the same issue you had, and did following this setup completely remove the delay issues? In the opinion of John at Digital Foundry it was a bug with the Xbox that hadn't been fixed, or do you think he's got the wrong settings applied on one or more devices? Any clarification would be greatly appreciated as I too seem to be in the same 1%er club as you, and was wondering if waiting a while for newer AVR's with updated HDMI specs might be better, rather than using eARC workaround. The DF video is on DF Clips 'playstation 5 Dolby Atmos support tested' (they mostly discuss the issues with Xbox though)

@johnrambo1st 3 года назад

Hey man great video, simple to understand and it helped me get my set up working. Cheers.

@TechnoDad 3 года назад

Awesome! I'm glad I could help Rambo!

@polocarrillo5831 3 месяца назад

Thank you! You solved my issue of not being able to run my Xbox X on UHD@120HZ. It finally came down to be my LG sound bar not being HDMI 2.1 but 2.0. Most expensive soundbar they had the SL10YG. I have it all hooked up to an LG C3 it was soo frustrating seeing my Xbox tell me my C3 didn't have all the features it was supposed to. This video solved my issue, thanks again!

@xjr1618x 2 года назад

thanks for this video. I have a Sony Oled TV 4k and the newly released Denon 1700h. I haven't been able to get HDR, 120 hz or dolby atmos. Now with your help I'm going to change the HDMI connections and hope it will finally work. New sub here!

@jnicholls21 2 года назад

You, my man, are a bloody hero. Thank you so much for this.

@TechnoDad 2 года назад

You're very welcome, James!

@switchbeck6673 Год назад

This is exactly the video I was trying to find, thank you

@TechnoDad Год назад

You are very welcome!

@vincentvincent4409 11 месяцев назад

I've had my Xbox x since pretty much it came out and I've never had Dolby Atmos on it I've had Dolby vision but I can never got sound. I watched your video about 10 times and I never would have figured it out without your help thank you so much I just missed a couple of things but it works perfectly I love it thanks again

@TechnoDad 11 месяцев назад

Nice, Vincent! Glad you got it figured out!

@calikillz714 Год назад

Finally I found your channel, Thanks for the help !

@TechnoDad Год назад

Anytime!

@madmax3375 3 года назад

Going to try this with my 2016 thx Onkyo 7.1. Thanks for this video 👍

@JonMoralesLA 3 года назад

Oh my God it's insane that one can have all the right equipment and still not get the best output due to the wrong settings. Manufacturers need to work on making this plug and play. Way too complicated for most people to get all these setting right. Thanks for the video!

@TechnoDad 3 года назад

I totally agree, Jon! They should have these things be automatic.

@hallhil 3 года назад

Finally i got my answer though I'm using a Yamaha A2A a rly great reciver.. Bang for the bucks and rly nice with the series x 👌tnx for help ✌️

@CristianPedroso 3 года назад

Wow! Thank you so much. I have a Samsung Q80T but I made the same path and worked fine here. It was a big problem and solved with the tips that you shared.

@gavhug1984 3 года назад

Are you using a AV Receiver or a Soundbar with eARC?

@storkman 2 года назад

Hello @cristian Pedroso, can you answer question please from other person's post?

@CristianPedroso 2 года назад

I'm using a Receiver Pioneer Vsx 326

@notmikemiz 2 года назад

I just bought the LG C2 and this video worked perfectly to get me Atmos with my Yamaha RX-V683 while enjoying the 4K 120hz. Thank you!!!!!

@tommek1982 2 года назад

I have very similar Yamaha (RX V685) Did you feel some audio delays?

@notmikemiz 2 года назад

@@tommek1982 Sometimes when switching to something else, yes. HBO Max has a definite lag of about 4s to get started. I can deal with this until I can afford an upgrade

@tommek1982 2 года назад

@@notmikemiz ohh terrible and strange at the same time because i dont feel any delays watching tv, TV apps like HBO etc. I had only one audio delay issue with xbox series x. Can U tell me which audio option on your xbox is with less audio delay? 5.1 uncompressed, Dolby Digital or maybe Dolby atmos? Im asking because i chose Dolby Digital and i think there is a very minimum audio delay hard to catch but maybe it is something wrong with my brain xD

@notmikemiz 2 года назад

@@tommek1982 5.1 uncompressed, the delay seems to be due to the receiver switching functions when switching apps - some use atmos, some not. That's likely the cause of the delays

@tp2100 3 года назад

Thanks for the info!

@WryMouthX 2 года назад

Amazing Vid! Got My Denon 9.2 Set up with my Xbox Series X! Perfect!

@TechnoDad 2 года назад

Nice! Glad I could help!

@WryMouthX 2 года назад

@@TechnoDad at 12:19 do you know if there us a way to check what's on a Denon Receiver? if all speakers are on and working>

@Darthpiro 3 года назад

Excellent explanation, thanks a lot!!

@TechnoDad 3 года назад

You’re very welcome!

@unjordi 3 года назад

Right on spot! Thanks for this!

@TechnoDad 3 года назад

You are so welcome!

@briannelson1666 11 месяцев назад

You’re a life saver! Thanks!!!

@TechnoDad 11 месяцев назад

Happy to help!

@alientruthseeker666 2 года назад

Thanks for this!

@chrishunt9675 Год назад

TD saving lives. Was getting ready to take the Avr back till I saw this. All good now!

@TechnoDad Год назад

Nice! Glad you found the video.

@johnrochester4504 3 года назад

Great video

@michaelschalk4718 3 года назад

Could you do a comparison on the audio delay when going to the tv speakers and going through earc to external speakers with this setup?

@zak8895 11 месяцев назад

Great video. I have the same set up but just a Sony amp. I couldn't figure out why I couldn't get 120hz...so I followed your instructions and bam! THANK YOU!

@TechnoDad 11 месяцев назад

Glad I could help!

@mikerulezz08 2 года назад

I have Yamaha AV but you helped me a lot bud!

@ryanschram 2 года назад

Thank you so much!! My SPK618 Denon provided to me died, and I just hadn't been able to figure out ARC. Who knew it was so easy. Turns out I had all the settings correct, but I didn't have the HDMI cables in the right spot on the TV. Derp.. It just didn't make sense to me. Thank you again! I thought I was going to have to take my receiver in and/or buy a new one. whew. bullet dodged.

@TechnoDad 2 года назад

Hi Ryan! I’m glad my video helped you figure it out. Enjoy your setup!

@godfather1116 3 года назад

Cool - thanks man - I can now configure my Seroes X correctly!

@TechnoDad 3 года назад

Perfect! If you use the Series X for streaming services, you might have to change the eARC setting to Auto.

@bernardgauthier4294 3 года назад

Thank you for the information. It look like we are going back to put everything to the T.V. and use the T.V. Earc to the Earc receiver. Until the receiver get more 2.1 for all your devices. I got a LG CX with Denon X4400H Dolby Atmos work only if the EArc is off on the LG CX watching Netflix, Prime Video and Disneyplus.

@bostonquad2068 2 года назад

Just change the video to audio 2 that's coming in on e-ark on your receiver settings

@michaelwest1130 3 года назад

THANK YOU FELT LIKE THIS WAS FIR ME ESPECIALLY

@TechnoDad 3 года назад

I think it was for you, Michael. I just can't 100% remember, LOL!

@poise619 3 года назад

Great video!

@TechnoDad 3 года назад

Thank you! Glad you enjoyed it.

@keepingupwiththejones2933 3 года назад

"HDMI 2.1 chip set mismatch" 😂🤣😅. Very proud of you for not cursing. Although I am fairly certain it got left on the cutting room floor🤣

@TechnoDad 3 года назад

Yeah man, that’s what they are calling it. Ridiculous!

@FORIAMBILL Год назад

great video

@Pipe-er1wl Год назад

Nice Job with the video! Its exactly what I was looking for!... I have one question, after you do all these changes, if you want to watch Netflix for example from the platform in the Oled, you dont need to change nothing? The configuraron is permanent and doesnt affect others apps?

@jimdowell1729 3 года назад

Geez! So many steps here! This is great! All I'm hoping for is my shield pro to work with lossless audio once the 4700 comes in. Using the cx myself. I'll let ya know how it goes. Got it from video only and they had to order one so it'll be a while 🥺 haha

@jimdowell1729 3 года назад

It would be nice to get a little video on the denon/marantz video>HDMI setup page and what exactly each of the options do. For example hdmi passthrough, passthrough source, and rc source select. I knew that through me around and around before trying to get the avr just right on what I wanted it to do. For reference I'm going to be piping my udp820, shield pro ps4 pro and switch to my cx and then earc'ing those fools to the 4700

@TechnoDad 3 года назад

I'll look into that Jim!

@irreplaceableboyyy 3 года назад

Happy new year and big thx for your videos... I have questions regarding digital sound out on LG TV. You said that Auto is for ARC and pass through is for eARC. I've a budget LG tv (UN7300) with a standard HDMI ARC but I've have both options (auto/pass through) 1/ what's the point of having pass through option since my tv don't support eARC? 2/ what's the difference between both options (I mean what auto really do and what pass through do)? 3/ I have the JBL Bar 5.1 (with real surround speakers which support PCM/LPCM, AC3 and DTS) I know that my tv don't support DTS as all LG TVs of 2020 and ARC pass through don't support LPCM so the only option I've is Dolby digital and am wondering if auto is the right choice rather than using passthrough!? PS: I can detect a difference between both options; when auto is selected surround speakers are a bit louder when pass through is selected the front speakers (from soundbar) are a bit louder and surround speakers are less louder. Plz help auto or passthrough which is the most accurate in my case and what's the difference between both.

@3d-tischler100 3 года назад

thank you. I could fix the Audio delay with your help. hdmi control was the problem👊👊👊👍

@TechnoDad 3 года назад

Nice!

@ryanleal1764 2 года назад

Did you need hdmi control on or off?

@MPisFafdr29 6 месяцев назад

thank you for this video

@TechnoDad 6 месяцев назад

You are very welcome!

@raycruz3094 9 месяцев назад

DAAAAMMMMNNN. Great graphics, blacks are black colors look stunning. It was hard to see as you were going inside the warehouse (in game context)

@JohnSmith-rx2uv 3 года назад

Hey Techno Dad, thanks for the great video! Question: Should I purchase a new AVR now or wait until the HDMI issue is resolved? What would you recommend

@TechnoDad 3 года назад

Damn! That's pretty odd...I would try contacting TCL tech support.

@vincentvincent4409 Год назад

Your right my bad changed a setting works!!! Thanks 🎉

@TechnoDad Год назад

You got it going? That’s great! What was the problem?

@vincentvincent4409 Год назад

Well I'm not really sure my TV says thought the Xbox dobie vision and they'll be sound through sound bar which it's really going through a receiver but anyway I have surround sound with all of the media apps but when I go to the game there's no sound at all and the only way I can get to play sound through the game is digital Dolby which I don't really want that any suggestions really surprised pleasantly surprised that you answer your text and comments Cheers

@Terrell1428 3 года назад

What’s going on techno dad.great video

@TechnoDad 3 года назад

Hi! Thank you for watching!!

@snirski 2 года назад

Great video! If i watch the news for example i will hear the audio through the AVR or once the AVR is switched off the sound will be pushed through the tv speakers?

@alekz8bits736 2 года назад

clear explanation, you´re my hero!!! I have a question, when you plug hdmi to eARC from TV, you used the spk618 too?

@TechnoDad 2 года назад

Hi! I’m glad you liked the video. No, I was not using the SPK618 when I made this video. I recently received that box.

@ashykhan01 Год назад

Thank you👏🏼👏🏼👏🏼Gr8 video😌Helped clarify a lot of issues I’m having with my pioneer 4k avr and Xbox one 4k setup (yes I know this is for Xbox series x (message for all you captain obvious trolls 🧌 revving your finger over your keyboards, so don’t bother typing))… So back to the initial message, Pls make a video that helps people with Xbox ones as this video truly answers those issues as well and there is nothing better than this video on the net for troubleshooting the Xbox one 4k issues; believe me… I’ve looked😅🤯😵‍💫 so back to the point… Gr8 work mate👍🏻👍🏻👍🏻

@KillerSneak 2 года назад

Any chance we can get an updated version for this video? Lets say with a C1 or C2 and the newest series X with the pass through option? I’m a bit lost now (just go myself a new 65” C2) and the options aren’t the same anymore. (Both the series X and the C2 have a pass through option for sound) And I’m assuming I should let them pass everything to my Denon receiver?)

@dwain3651 3 года назад

Thanks for the video. I was hoping it was going to help me but I have set all the setting up the way you said and the Xbox says my receiver does not support atmos when I select it in the Xbox option. I have the samsung HW-q70t soundbar with rear speakers and the LG CX, both support eARC and dolby atmos. It works fine in apps and the ps5 but not with the Xbox series x. The only way I can get mine working is to add the thenaudio zone2 and it all works great. Without the zone2 I can select auto instead of passthrough in the tv options and it will work but I get a 1sec lipsync delay.

@gustavpicora 2 года назад

This was vey helpful, thanks a lot, as others have said, i also have some sound lag, like 70-100ms, based in twitch av sync video. I have the series x connected to. LG BX(2020) to the 2.1hdmi, then eARC to the soundbar. Settings in console is as you suggested, on the tv however i left the dolby atmos switch to off, my thoughts is that using audio passthrough, will have the sound bar handle the audio, am i wrong? Also i found out that having the switch off (atmos on the tv) helped with the lag from like 300ms to the 70-100, I mentioned before. I see dolby atmos on the soundbar info screen, when playing cod or playing any of the dolby app videos. I will try changing the cable from tv to soundbar, and see if it helps, the cable from console to tv is the one that came with console which shall be ultra high speed @40gbps/120hz. 4K.

@natejoe9924 3 года назад

The reason why I didn't answer you back I was sleeping I do appreciate it I just got done working yesterday

@TechnoDad 3 года назад

All good. I work graveyard so I understand having a crazy schedule.

@natejoe9924 3 года назад

@@TechnoDad thanks

@briangreenstein9263 3 года назад

Hi. Great video. I did everything exactly as you instructed using the Xbox series X, LG CX and a Marantz 1171 8k receiver. Everything works, EXCEPT, there is a slight audio delay when playing Xbox with the audio set to Dolby atmos. Nothing seems to work, not even adjusting the audio sync delay on the AVR. It’s not awful, but it’s kind of annoying and noticeable in games like call of duty. I’m wondering if I’m just better off using uncompressed audio. Seems like a waste to not take advantage of Atmos. Any suggestions?

@tommek1982 2 года назад

Hi i have exactly same problem with little audio delay. Did you solve it?

@arindamchatterjeesccm 2 года назад

Hi Techno dad, great video...I have a question by the way.... The AVRs that I have checked all claim Dolby Atmos BUT then have ARC HDMI and not eARC, so when the TV with eARC sends UNCOMPRESSED signals to the AVR, is the AVR in a position to accept that...?? Remember, the AVR says ARC (next to HDMI) and not eARC...?

@jenesuispasbavard 2 года назад

With these exact settings, I get some pretty horrific audio lag when using Dolby Atmos. My setup: Xbox Series X --HDMI 2.1--> LG C1 OLED --HDMI ARC--> LG SN7R soundbar. My settings are - Xbox: Bitstream out, Dolby Atmos for home theater; TV: Sound out Auto, eARC off; soundbar: ARC.

@shikapal7767 2 года назад

Hi. Are you able to brief me on this? I have the same TV and my Xbox x series literally has no sound when playing games. Thanks.

@natejoe9924 3 года назад

I'm just going to wait till I can get the Xbox series X I'm going to stay subscribed thank you though

@seriouslyaye 3 года назад

Great vid. Thanks man. I've got the Series X and LG E9 although my receiver is the Denon 3700. Got it setup as per your video now. I'm wondering what happens when a game isn't Dolby Atmos but the Series X is forcing Atmos Bitstream. Also. Do you know if that Marantz app works with Denon receivers? Would be very handy to see which speakers are currently active

@TechnoDad 3 года назад

Hello Ryan, download the Denon AVR Remote app. You may have to change passthrough to auto or change the Xbox back to 7.1 uncompressed so it doesn’t force Atmos.

@itayraviv Год назад

Great video... thanks Question: what if I have also other inputs connected to the AVR (Denon AVR-x2400) like Apple TV, PS4, etc? Those will work normally via the AVR monitor (ARC) connection to the LG OLED TV (HDMI1)?

@iamr9 3 года назад

Hey Channa, can you suggest a receiver under $500 that would have eArc + hdmi 2.1 and would be compatible with ps5??

@jdubdoubleu 2 года назад

@natejoe9924 3 года назад

I really appreciate you helping me out a lot of RU-vidrs wouldn't even took the time to do that it would just ignore

@nathans4003 3 года назад

We’re you able to enable dtsx like this... I was able to set it to atmos, but if I try to set it to dts x I say my receiver Is Not capable (I have a 6700h)

@SniperVIIUS 3 года назад

great! I have a SR7015 being delivered tomorrow and I will be setting everything up with the Marantz and Series X. 2 weeks ago I also bought the LG CX 77" and a Klipsch Atmos surround system. It will be a 5.1.2 for now but will soon be the 5.2.4 or maybe the 7.2.4 if I decide to add an extra amp. I'm open to ideas for amps. Subscribed!! Oh, 1 last thing, I wasn't able to get an image from my PC to the new LG CX for some reason. I tried to connect my new Corsair i7200 with a i9 10850, 32gb ram and a 3080 but didn't get a picture on my input 3 or 4. Any tips for that?

@natejoe9924 3 года назад

You made it more clear it's just I think I don't have a 4K cord

@coldhalloweennight6435 3 года назад

Thanks for the Video, was great! But i have a Question: My Receiver (DENON AVR 1300W) only supports standard ARC. Does that mean that the Sound from the Console is only output through the speakers in compressed form, and does this also mean, that my already connected Devices such as UHD Player only output compressed sound? Many thanks!

@JordanStead 2 года назад

THANK YOU! Been searching for this for years for my (new) Xbox Series X to LG C9 to Marantz 6011. The only issue was the lag, and the LG AV sync setting does nothing to help. Had to switch Xbox audio out to uncompressed stereo, 5.1, or 7.1. Let's hope for a firmware fix from Microsoft's side...

@alejandrolopez8657 2 года назад

Excuse me, do you know if the pcm audio can output 5.1 channels through earc. Or how do you get uncompressed 5.1 channels from the Xbox, I’m trying to figure out how to do the same but for a PS5. I don’t have a hdmi 2.1 receiver so I’m using earc as my tv and receiver do support both of them earc.

@av_rob79 Год назад

Great information, this should also work with a PS5 and a TCL R646? My AV-Receceiver is 4k but only has ARC but I'm thinking this workaround will still give me 4k/120hz and stereo/atmos sound? I was worried I'd need a new receiver with 2.1 but do you think this setup will work for me?

@briankgarland 2 года назад

This got the video working, so thanks! But the Atmos audio has a delay (not with headphones though). Any idea how to fix the audio delay? So far I have to switch to Stereo Uncompressed, which sucks.

@skydivechris1984 Год назад

Would you recommend turning on allow dolby vision and dolby vision for gaming from the xbox menu ---> tv & display ---> video modes?

@diegocastaneda4732 3 года назад

Hey Techno Dad, I also have a OLED E9, running Series X cable straight to the tv via hdmi 1, then cable to my denon AVRX4400. No matter what I do I can’t get rid of the audio lag whenever you select bitstream then Dolby Atmos in the xbox setting. Even the Dolby digital has a lag. The only option that does not give lag is uncompressed and DTS. None of the lip sync settings will fix the lag, I know a lot of people have this exact same issue.

@TechnoDad 3 года назад

Hi Diego! I don't have those issues and I'm not doing anything special. Could it be a cable issue? Maybe swap out the cable from the E9 to the Denon? I'm not really sure anything else that could help the situation.

@Supershake1979 2 года назад

Same issue and it's pretty frustrating

@iiithegaziii451 2 года назад

Did anyone sort the lag issue out? I’m having the same issue with my C1. Apparently the game mode/ low latency is causing this but I don’t know how to remove the lag.

@jonathanb3886 3 года назад

Great video as always. I was wondering if you could do a video on PS5 vs xbox series x as 4k bluray players.

@TechnoDad 3 года назад

OH man! My PS5 took a big fat dump! It's bricked! I did watch some 4K UHD discs on it before, but I wouldn't have anything to show if I make a video about it. Honestly, if you are moving from 1080p to 4K, the PS5 and Series X will do a good job. If you already have 4K, I would suggest getting a stand alone player.

@BigNickTx 3 года назад

Bad Blu-ray player versus another bad Blu-ray player

@jonathanb3886 3 года назад

@@TechnoDad Man thats so frustrating. Yeah I've had an issue playing call of duty cold war zombies high rounds crashing on me but other than that the experience has been pretty smooth. For some reason I'm seeing that the audio output from PS5 is much greater than my audio output on my UDP820 Panasonic. Any thoughts on the reason of that? But the picture on the Panasonic looks crispier. I have a sony A9g and marantz sr7013 nothing hdmi 2.1 compliant. So I know I'm not getting the full experience.

@kaukey 3 года назад

On PC I use a low hz side monitor connected to receiver and keep my good ones directly from the graphics card

@TechnoDad 3 года назад

Good tip!

@BenSinz45s Год назад

Thanks man. Question so when im on the hdmi for my xbox how can i see the marantz menu when i want to adjust the bass?

@oCLUo 3 года назад

Thank you for this video!!! I have a C9 and a older Denon X1300W Can I hook up the ps5 and the series X in this fashion at the same time?

@TechnoDad 3 года назад

Unfortunately, your Denon won’t support 4K120Hz, you’ll have to go this way - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ik6Aco1w07g.html

@nathanielvanasselt7014 Год назад

I have a samsung series Q80T instead of a LG - I will get home tomorrow to setup my new Paradigm/Denon home theater but was curious if we know if the same theory can be used with this TV. Looking at the specs it seems like it is capable of most of what the LG is (120 Hz, eARC, etc)

@ecomasterster 3 года назад

Hey Channa, I bought DENON s650h recently and was disappointed that I've ducked up, as it does not support 120fps throughput, but your solutions seem to resolve that issue, but are there any drawbacks except comofrtability?

@yasirahmad3006 3 года назад

I have a ps5 and yamaha Rxv6. Can i use the above method u showed to get 4k 120hz hdr n dolby atmos?

@cez7603 2 года назад

Great vid man. Hoping you can clear something up for me. Curently my setup is Lgnano85 Denon s760h Rtx 3070ti So running pc HDMI 2.1 to the lg and an HDMI 2.1 cable from tv earc to the AVR earc. I have the Dolby access app downloaded and running. When play game that supports Dolby Atmos (like cod modern warfare) the Denon app say it running "multi in, pcm". Thinking there was an issue scoured the internet for answers. Came across Dolby Atmos via MAT. Am I getting Atmos over pcm this way. Ok thanx

@DaveVoyles 3 года назад

I have all of these devices, and solved it the same way. TLDR: bug with Panasonic boards affecting a huge number of receiver models this year. Likely won’t be a software fix, but hardware replacement.

@THATGUYTALKSMOVIES 3 года назад

Great vid. Wondering, if you have ANY guidance regarding the setup via a Nakamichi Shockwafe 9.2 Ultra soundbar. I'm running an XBOX SERIES X via my LG C9 and the Nakamichi soundbar. Nak help desk setup guide says to connect XBOX via HDMI 2 port on the soundbar. That setup does NOT allow for 120HZ 4K UHD. I tried connecting the XBOX directly to the HDMI 1 port on the C9 (as instructed in your vid) and...suddenly the XBOX display settings confirmed 120HZ 4K UHD...and all green checkmarks. BUT...sound for some reason was weird...muffled, not working correctly. I've reached out to Nakamichi and just waiting for their reply. Figured I'd hit you up as well as trust your guidance. (just FYI: The Nakamichi soundbar only has an ARC port...not eARC) And as you know, the LG C9 has the eARC.

@anthonyalvarado1635 Год назад

Super helpful video bro ann these manufacturers should feel shame . It shouldn't be this hard to get both things to work in tandem.

@TechnoDad Год назад

Right?!?! I’m glad you found my video!

@rickied1418 3 года назад

For some reason there is an audio latency with Dolby atmos and my video elevate system. I have an LG nano cell 90 television. Everything is set just like you described in this video but I cannot get rid of the audio latency

@TechnoDad 3 года назад

There is a lip sync/AV sync option in the LG.

@samuelweinstein9090 3 года назад

Are you playing any games with atmos on SUrround Sound? I saw resident evil 2 supports it for series X. Bummer that ps5 is dev their own 3D spatial surround sound.

@TechnoDad 3 года назад

No. There is no way for Sony to deliver their 3D audio except from that one headset.

@TheMattyB 2 месяца назад

@technodad can we get this exact same video updated with Xbox Series X & Pioneer Receivers? (VSX-LX505 etc). I do not believe that combo exists on RU-vid, and its common use leads to a lot of questions on similar videos. I have that combo and am having trouble replicating your testing results. Thanks!

@CompetitionChris 3 года назад

Just curious, does your TV still say Dolby Atmos when it's running through e Arc? Mine only does it what it's using internal speakers with Dolby Atmos. I still get Dolby Atmos to my receiver but my C9 won't pop up Dolby Atmos when it's running eArc

@TechnoDad 3 года назад

Hello Chris! No, the Dolby Atmos flag will only show up when the TV is set to Internal TV Speakers.

@MyongGong 2 года назад

Thanks, I was trying to my A/V receiver and it was real screwy!

@cypher4689 3 года назад

Hey there, how do I pass the audio through on a Sony X90J TV? Played with the settings but no luck. It has 1 HDMI 120hz in & 1 HDMI eARC to my Yamaha atmos receiver A1050. Many thanks 🙏

@ahsokaxtan0 2 года назад

I’m looking to get the lg sn11rg sound bar with the subwoofer 2 speakers etc to use for my Xbox series x and also the apps the tv comes with Apparently though they can’t do 120fps I have an oled tv and it’s works fine now so games that can run 120 FPS I guess I’ll have to unplug the surround sound system for like cod, which is so annoying definitely think I’m going to struggle setting it up though I’m useless at all that I get the basics but like the settings on the system and Xbox and tv I’m worried about

@adriangraf8432 2 года назад

Does that work with an HDMI Sync Box from Philipps Hue? How would like the connections be then?

@stevetaboada9582 3 года назад

So are Marantz and Denon the only AVR's that work with next gen consoles?

@MikeBixby 2 года назад

Hi. I dont have eARC on either my Sony STR DH590 or my Toshiba M550 Fire TV. I am used to run-in all devices (Xbox one X, PS4, etc) to AVR first then HDMI ARC to TV. Question: Will there be any improvement if I route the XBOX one X first to TV then ARC from TV to AVR? I suspect given my 4K 60Hz limitations across the board it wont make any difference...?? Thanks in advance for the reply

@chaturanga 3 года назад

Hi technodad The xbox now has a audio pass through option and I have lg sn11 soundbar. Should I use audio pass through on the xbox?

@SLCQD Год назад

Hi! Thanks for the video. Any chance you could update this video as there is no bitstream out option anymore on Series X… Or just post the new steps to get Dolby Atmos… 4K 120hz is working now so that’s already great, thanks.

@TechnoDad Год назад

There must have been an update. I’ll check it out.

@fricktor 16 дней назад

Maybe this is a dumb question, say I follow these steps and it works great for the Xbox. My question is, If I want to add a PS5 and a Nintendo switch to the system along with the Xbox, (so 3 different systems) do they get plugged into the TV too, or into the AVR?

@KesegofetseSerobatse 3 года назад

Dude thank you for this video.. I'm buying a Yamaha rx-v6a and want to know if the same can be possible?

@TechnoDad 3 года назад

Hi! It should be working, but I haven’t heard any word yet.

@captainzappbrannagan 7 месяцев назад

If xbox sends uncompressed video and audio to the TV wouldn't it be less lag for the receiver to take that uncompressed audio passthrough via eARC vs ARC?

@ofirzarbiv158 10 месяцев назад

As far as I understand, the XBOX supports Dolby Atmos audio. Is it possible to know which Atmos it outputs (PCM/DD+/TRUE HD) in games

@natejoe9924 3 года назад

You took me through all the steps there's nothing I can do I'm hoping it's just the cord

@chiromofo1 2 года назад

ahh..I've just installed my LG C1 with everything going in a Denon avr-1912 (computer, xbox, concast cable box). I should have everything hitting the LG first and eArc to the Denon. Problem is, already mounted and might have a problem squeezing 2 more hdmi cables into the wall.