How to stop overheating GOPRO Hero 10 (and Hero 9) 

Great suggestion! It was already too tight sliding the gopro into the cage, but I will give it a try in the future.

I've tried removing the battery door and such on both of my 8 and they still overheat at 1080@30fps

Gopro has one active microphone right below the lens and there is a gap between the mic and Ulanzi case to capture sound. If you attach a Mic Adapter, then you can place an external mic anywhere. amzn.to/42G6Tem

The official GoPro mic adapter I use because third-party adapters don't usually work. amzn.to/3LUXPue

Both cases are great, but it comes down to preference having mic adapter mounted center/bottom or side/vertical making one configuration tall/centered and the other wide/unbalanced. Neither cases support media mod. As for mic, I use Godox M2 wireless (amzn.to/3zpaJMl) and Rode Videomicro. (amzn.to/3z6XfTY)

@@udtrader I am mounting on the front chin of my motorcycle helmet so usually wind keeps camera cool. So I think the side mount may be better, what d you recommend? Thanks

I also will purchase the heat strip as recommended by another subscriber. Its available on Amazon .5 thickness. Thanks for the recommendation on the mic. I need a lavalier type to go inside the helemet

@@nrndf may i know which one do you choose i plan to buy one for motovlog also

With the black paint possibly

This test was 4K30W mode. However, I plan to do an extensive overheating & battery test in 4k/5k at higher framerates when firmware 1.20 is released.

@@udtrader OK. I am waiting for the next one, because I bought a GOPRO 10 to record 4K120fps.

Hello. Thanks for this video. I am paraglider and i am used to film during many hours. I got Hero 2, 3+, 7,8,osmo action and insta360 one R 1inch mod. I amstill using the last 3 cameras (hero 8, osmo action1 and oneR) at the same time. I got many problems with gopro even if i did 6 hours continious films. But overheating and bug issues are crazy. One question: why didn't you test your camera onto an external battery (powerbank) to really know if your camera is overheating or not?!? If your camera evacuates the heat enough then it doesn't matter if it is filming 6 or 7 hours. On my sport (paragliding) it is quite common to start the camera on the helmet half an hour before the takeoff and then filming 2 or 3 hours and sometime many hours more. The wind and low temperature with the altitude is not enough to avoid gopro crash. But i didn't test with a cage. I just bought 2 brand new aluminium cages yesterday for osmo action and insta360 oneR (Ulanzi plus with booster battery). I am quite sure it will help dissipating the heat. BUT i think there is a very important property you maybe missed. When you are using the cage inside, not directly exposed to the sunlight, then i guess the color of the cage makes no difference. But outside, especialy with no wind, i am sure the black metal cage will be very hot in few minutes just because of the sun. I recommend to use white cage or mirrored/metalic grey color so that the sunlight doesn't increase the heat instead of trying to dissipate it! Hope maybe Ulanzi and this kind of company will think about their colors when building cages. Cheers. Denis.

@@denisgallego3130 You are absolutely right! Prolonged exposure to direct sunlight will cause the metal cage to transfer heat to gopro instead. I will take your suggestion and baseline test the gopro without battery in the next firmware (1.20?) release. Thank you.

@@denisgallego3130 I've used external batteries on my 8 and it still overheated and shut down.

You can remove screws off the front lens cage on Ulanzi G9-5 to attach other lens. Otherwise, there's a variety of metal cages available for Gopro.

Yes. Make sure to use a powerbank with enough amperage through USB-C to power the gopro.

This should answer your question. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JQWuzzAq1Lo.html

wrong video. sorry. Correct one here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-40FsYyNqGJg.html

There is a door from ulanzi (buy at aliexpress) with a charging hole. I only had one shutdown until now.

I'm dead ahahahahahahaha