HOW TO: Supra manifold on IS300

Подписаться 2,5 тыс.

Просмотров 21 тыс.

50% 1

Instagram @CyrusMohebi
cyrusmohebi...
Today I show you how I installed the FFIM (Front Facing Intake Manifold) on my IS300 2jzge engine. Get the feel and look of a 2jzgte supra engine for your 2jzge.
PARTS USED:
Manifold amzn.to/2ZbUyh8
Throttle body www.rossmachineracing.com
Throttle cable amzn.to/2X6Gzr9
Power steering adaptor www.powerhouseracing.com/prod...
Power steering reservoir amzn.to/2Db4u17
-10 an line amzn.to/2X877Z3
-10 push lock amzn.to/2GbzaQz
3" - 3.5" coupler amzn.to/2GnQsLT
Go to your local auto parts store for thread lock, RTV, threaded to barbed adaptors for the brake booster and vacuum lines, drill bits, threading tool.
You will need to modify the throttle cable to fit the gas pedal and throttle body. A fuel line might be in the way so you MIGHT have to turn it 90 degrees or bend it down so its not in the way. Get a set of allen keys to adjust the throttle body.
It should be the same for all 2jz-ge engines (na Supra, SC300, GS300, IS300)
Thanks for watching!

Авто/Мото

Опубликовано:

11 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@ralphlucero7511 4 года назад

Dude , thank you so much. I don’t have a is but a sc motor I’m boosting and putting it into my truck. Thank you so much for your video and helping people like me . You got a subscribe from me man mahalos 🤙🏼

@slicktop2jz855 3 года назад

Sick vid bro

@BjornFSE 4 года назад

Good Video Bro

@Catwulf 2 года назад

That girl deck brought me way back

@CarModsGarage 4 года назад

nice video brother. I am finishing a 2JZ build for my Drift car but it is a BMW not a Lexus :).

@olusesi15 3 года назад

This is how you get subscribers! By having dope USEFUL content like this!🏁🏁🏁🙌🏾

@SukottoSama 3 года назад

How did you tighten the bolts from the inside of the manifold? Maybe this will help others... My friend and I arms and socket are too large for that closed space. We drilled and tapped holes in the plenum above the bolt holes. It was the only way we could fit our socket into the plenum then we closed the holes with bolts. Some people may not like it but it's a 130$ plenum. Your already drilling and tapping holes for the vacuum lines and you may has well make it easier installing it. Later my friend cut the bolts closer and clean up the treads. Another good tip is to space out your vacuum lines. It's difficult to install your fitting if their too close.

@brown55061 3 года назад

This was a really good example of how to do it and what you sacrifice. I actually want to keep my cruise control for longer trips, anyone know if another throttle body that would allow you to keep it? I've read possibly an SC400 TB could work or even LS400 but can't confirm.

@corygrove1434 3 года назад

I'm going with a 350z throttle body with adapter on this same FFIM. Will be connecting to an SC430 DBW pedal and run on Haltech so I can retain cruise control.

@Rhapsheet 5 лет назад

Subbed

@danthomas86 4 года назад

Why did your traction control not work anymore? Was it purely down to the change of engine management?

@warrenclutts8220 2 года назад

how did you relocate the ecu could you leave a link to the part please and thank you

@jeffersonbagain8358 Год назад

im about to order RMR 82.5mm TB but im not sure if the TPS on is300 Counter clockwise or clockwise ?

@focusinc4266 Год назад

feed back requested: I have an IS300 motor/trans/suspension subframe.....and a 92 celica that I want rear wheel drive. ✌️ and thanks for any comments

@appledoctor7711 Год назад

Hi Which sensor you connected in intake to give signal to ecu ?

@christopherromero2001 5 лет назад

what ECU did you use

@fidjet 2 года назад

Yo guy. What ecu?

@ham003latechedu 4 года назад

So its not possible to install without removing head or motor?

@traevonbassett9654 3 года назад

Yes

@wasiq23 4 года назад

How much hp at you pushing

@808volcomlifer 5 лет назад

hey brother, how did you tighten the bolts from the inside of the manifold??? I have the same one and my fat ass arms cant fit in far enough to get to half of them, any help on how you accomplished this would be great, thank you

@cyrusmohebi 5 лет назад

808volcomlifer I was able to slip my arm in for most of the bolts to tighten. I luckily had a long Allen key that would reach the bolts in the back. It was tricky but it worked

@808volcomlifer 5 лет назад

I figured as much, my plan was to weld the plenum like I did with my other build but if there was a way I could physically tighten it myself I would love to go that route, guess ill have to find someone with smaller arms then mine to try and tighten them hahahahaha. thank you for the reply, very helpful

@hoonhum6886 4 года назад

Is it harder to change the oil filter with the ffim?

@RocketRaspeed 5 месяцев назад

Nope

@lucasvang3058 4 года назад

Hi, so do you just use hose clamp for the power steering hose? No leaking issue?

@cyrusmohebi 4 года назад

Lucas Vang yes, just make sure the hose you use is rated for power steering, it will eat through regular hoses like crazy

@lucasvang3058 4 года назад

Cyrus Mohebi so the one in the link is fine, right?

@lucasvang3058 4 года назад

Thanks a ton..

@focusinc4266 Год назад

no cruise control? 😢

@glitchstudios7797 2 года назад

How do people run the ffim without an intercooler or turbo?

@804MRMAN 10 месяцев назад

They don't!

@BongoisaPyro 5 лет назад

What transmission are you using?

@cyrusmohebi 5 лет назад

Surge W55.

@williamcruz364 4 года назад

Did u use factory ECU?

@kool-aidsphuckery9596 4 года назад

Paola Vasquez he said you need to use and aftermarket eco. I wonder if you could get away with using an apexi fuel controller

@batdad187 5 лет назад

Fact- this kills a lot of bottom end response, so it also shouldn't be done if you're on stock cams or a baby turbo. Large throttle bodies aren't fun for driveability on the street, and the stock tb/intake can support 600+whp :)

@LMFAO5001 4 года назад

Is this true for all front facing intake manifolds or just the one used in this build? I want to keep my stock 2jz ge naturally aspirated but i really want to swap to ffim cause the stock one is a pain for maintenance and looks ugly. Is there any way around the bottom end loss? maybe a different size intake manifold? Im thinking of turboing later on but for now just want the engine bay to be cleaner and easier to work on but if it runs worse id rather not.

@batdad187 4 года назад

@@LMFAO5001 all aftermarket ones, yes. The stock GTE one still has a decent bottom end, but not as good as the stock GE mani with ACIS. That's literally the best bottom end response (while still having decent top end) you will get. Dont waste your time doing shit to NA just boost the bitch

@LMFAO5001 4 года назад

@@batdad187 thanks! I only want like 300-350 hp at the wheels cause i need to street drive it. Can i do that with a small turbo or am i better off with a big turbo and low boost?

@804MRMAN 10 месяцев назад

@@LMFAO5001I've never seen anyone figure out how to change the 2jzge-vvti to ffim without turbo, and changing the ecu

@Highway94 4 года назад

Be what ECU did you use

@Highway94 4 года назад

And what sensor was It that needed to be plugged into the intake manifold

@bananaman2184 3 года назад

Highway 94 MAP sensor

@geratsubaki8677 5 лет назад

So this doesn't work for my SC300 2jz?

@geratsubaki8677 5 лет назад

Non vvti

@zac2384 5 лет назад

I saw the non vvti one needs an idle air control valve but it's a similar process

@Int3ggy 4 года назад

are you still able to reach the oil filter with that intake

@cyrusmohebi 4 года назад

Matthew Regidor yes, I remove it from Underneath the car

@peterfalken2498 2 года назад

Could I run that setup as NA?

@cyrusmohebi 2 года назад

I wouldn’t recommend it

@peterfalken2498 2 года назад

@@cyrusmohebi vacuum insufficiency? Compression issues?

@cyrusmohebi 2 года назад

@@peterfalken2498 if it’s NA it would be too much work to go stand-alone ecu, do all the labor to fit the manifold and lose cruise control/ TCS.. just to have a FFIM and make around 200hp. There would be no point IMO other than looks

@peterfalken2498 2 года назад

@@cyrusmohebi Thank You

@peterfalken2498 2 года назад

@@cyrusmohebi BTW, my cruise don't work anyway