How to swap a Mk3 Cluster into a MK2 Dash

Подписаться 18 тыс.

Просмотров 24 тыс.

50% 1

This Video goes with my two Swap Series video's. How to swap a Vr6 into a MK2 and How to swap a 1.8t into a MK2. To keep this simple this is for cars with MK4 swapped engines.
If you've been using your MK2 cluster with the cable running down to your transmission for the MPH. You will change that out for a MK4 speed sensor that goes into the transmission. Both MPH and RPM will work
Step by Step How to swap a mk2 1.8t
• Step by Step How to sw...
VW MK2 Golf 1.8t Paint Correction | Picknpull | Chayo's Garage Pt.13
• MK2 Golf 1.8t Paint Co...
Golf MK2 1.8t Swap | First Test Drive | Pt.12
• Golf MK2 1.8t Swap | F...
MK2 Golf 1.8t Swap | Finally on the ground | What's that noise Pt.11
• MK2 Golf 1.8t Swap | F...
How to swap MK2 Golf 1.8t | Pt 10
• How to swap MK2 Golf 1...
How To Swap MK2 1.8t | The First Start | Pt 9
• How To Swap MK2 1.8t |...
How To Wire MK2 Golf 1.8t | Plug and Play Adapter Harness Install Pt.8
• How To Wire MK2 Golf 1...
How to Swap MK2 1.8t | Engine install Pt.7
• How to Swap MK2 1.8t |...
How to swap MK2 1.8t | 02J tower, Clutch, Trans, Motor Bracket Install Pt.6
• How to swap MK2 1.8t |...
How to Delete SAi / Combi V / PCV / N249 / EVAP | MK2 1.8t Swap Pt. 5
• How to Delete SAi / Co...
How To Swap MK2 1.8t | MK4 O2J Shift Box, MK3 Gas Tank and Subframe Install Pt 4
• How To Swap MK2 1.8t |...
How to swap MK2 1.8t | B4 Passat Pedals, Brake Bracket, Pedal Adapter, Clutch cylinder Install Pt3
• How to swap MK2 1.8t |...
How to tell if your MK2 is CE1 or CE2 | What wires to Remove | Plug & Play harness Install Pt.2
• How to tell if your MK...
Step by Step How to Swap Mk2 Golf 1.8t | PARTS LIST | Pt.1
• Step by Step How to Sw...
#Golf #MK2 #mk3

Авто/Мото

Опубликовано:

13 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@JakeRawSon 3 года назад

To get your cluster to power up you will need to make a jumper wire to E2 to D8. Plenty of information online on this. Good luck I hope this video helps. 👍

@davidcox2716 3 года назад

Great video as ever, shows how simple it is really, have got a 3.5 dash in the garage ready to go in next project.

@eyeamfresh82 3 года назад

Morning Jake I don't have a MK2...yet, but good info keep it up good info as always whether you make mistakes or nail it in the first try you always keep the info coming.

@Bomhilsnotcountries 3 года назад

Better than coffee :) Best way to start day with some Rawson vibes✌🏾🔧

@JakeRawSon 3 года назад

Thank you Thomas

@candyrawson9365 3 года назад

Great video! I can’t wait to try it on mine

@69thedrummer 3 года назад

Damn son, that was raw lol Might have to do this in my Cabriolet

@chunderbutts 3 года назад

I was able to cut that layer of cardboard-like material out from the upper inside of the dash with a utility knife. Also I believe 4 and 6 cylinder clusters are interchangeable, you just need to program the cluster to work with the correct number of cylinders. There's a thread on vortex called "mk3 cluster tricks" that goes over this process. Thanks for all the helpful vids as always. My mk2 vr6 swap is going strong and your build was my inspiration. 💪

@redraddo 3 года назад

Your rpms will be off if you use 4cy cluster on vr6 and vice versa

@westbeach400 3 года назад

I love this video

@laithkhazaleh2877 3 года назад

Thank you so much

@rabbitgti652 3 года назад

Perfect!

@ledmk2 3 года назад

Nice made

@dylangrimshaw9797 3 года назад

Wouldn’t of been able to figure out how to do the swap without this video so Thankyou 🙏 curious how you got the speedometer to work? I’ve read about people using a speed sensor from an aba on the 02j transmission but looking at the one from the aba it doesn’t look like it would work proper? If you could help me out I’d appreciate it

@JakeRawSon 3 года назад

yes speed sensor. I think you need to use the same as your engine. So if its vr us a speed sensor from mk4 vr, 1.8t from 1.8t trans

@kurkurkurk4407 4 месяца назад

will this work with a AAA mk3 vr in a ce2 mk2?

@nilsjohnsen7515 3 года назад

Great man👍 My cluster brackets is made of plastic. Good info again 👍👍 Thanks

@JakeRawSon 3 года назад

Plastic, I've never seen that.

@nilsjohnsen7515 3 года назад

@@JakeRawSon I have never seen it before either. Keep up the good videos👍👍

@VW_Golf-II_VR6 3 года назад

@@nilsjohnsen7515 Can it be that you have the "hard" dashboard, which was used in the entry level trims? Although I live in The Netherlands, and specs differ per market, I have a 1991 1.3i CL (which I guess stands for Crisis Level) and it also has the hard dash, with plastic brackets... Benefit with this dash, though, is that there is more space on the inside, so need for grinding due to the lack of foam and the top side rarely crack. ;-)

@nilsjohnsen7515 3 года назад

@@VW_Golf-II_VR6 Yeah it’s all plastic inside my dash. Mine is a 90 mod. I have seen the same dash as Jake has on earlyer mod here in Norway.

@VW_Golf-II_VR6 3 года назад

@@nilsjohnsen7515 As far as I know, the soft dashboards were built in the GL trims and higher (so, CARAT, GT, GTI etc)

@ubersleepydub 3 года назад

Didn't the mk2 cluster use a speedometer cable? How did you get that to work?

@pkf4124 2 года назад

Use the sender from a mk3 or newer box its elecronic

@davelz03 3 года назад

Told you I'd watch it!!!

@JakeRawSon 3 года назад

Thanks Dave

@joekizonu9503 3 года назад

I'm hear, I was told I better be hear.. 😁👍

@JakeRawSon 3 года назад

lol thanks Joe

@VW_Golf-II_VR6 3 года назад

Nice informative video. If I may make one comment, though, it would have been even better, if you had removed the steering wheel, in order to give a better view 😉🙈

@salemsouth 3 года назад

Jake unrelated question to this vid, i wanted to find out what suspension you did on the wagon? i searched vids couldn't find it, Thxx

@JakeRawSon 3 года назад

It's just a H&R cup kit I found at a junk yard. This video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GJhlFvd8yJk.html

@salemsouth 3 года назад

@@JakeRawSon thanks dude, any chance you have the p/n handy? were you saying different springs or shocks in the back due to wagon? thx

@vajkfustos8346 3 года назад

Dear Jake! Could you tell us, What we need to do. if we want to take the original mk2 cluster, but we want to run perfect with rpm and mph/kmh? What we need to change for this operation?

@JakeRawSon 3 года назад

I think you would need something like this s-pautomotive.com/product/digital-to-analog-tach-adapter-module-with-cylinder-converter-combo/

@vajkfustos8346 3 года назад

@@JakeRawSon Millions of thanks! You helped me a lot with this.

@anesbrkicevic1060 5 месяцев назад

Hello i was wondering of changing my golf mk 2 cluster with mk 3 cluster would that be possible if the engine and everything else is stock or ?

@JakeRawSon 5 месяцев назад

no. Only for mk4 swapped engine cars

@anesbrkicevic1060 5 месяцев назад

@@JakeRawSon oh well thats a shame but still thank you for the reply😊

@albinaxhami2693 Год назад

What about the cable that runs from the transmision that plugs in to the cluster

@JakeRawSon Год назад

This is only for people that have done a mk4 swap

@wrongly5286 3 года назад

r.i.p ce1 brothers....

@ervinhernandez3137 3 года назад

Do I have to modify any wire 🤔 . Or is it just plugs and play?

@JakeRawSon 3 года назад

you just have to make a jumper wire.

@ervinhernandez3137 3 года назад

@@JakeRawSon hey Jake the mk3 cluster will work in my mk2 with the stock engine 8v .I just swapped the mk3 cluster and the only things that work are clock and millage

@woods702 6 месяцев назад

Does your gas gage still work? And does your signal light's and everything else

@JakeRawSon 6 месяцев назад

Yes but all my cars are mostly mk3 or mk4. The only thing that's mk2 is the shell and some interior.

@woods702 6 месяцев назад

I have a 1990 carrado with a 1.8t from a 2005 gti and my dash is still Is original and my rmp and speedo don't work I'm hoping to do this swap you have done @JakeRawSon

@JakeRawSon 6 месяцев назад

@@woods702 Yep it will work

@woods702 6 месяцев назад

So my fule Gauge should work after this swap ?

@woods702 6 месяцев назад

Also will only a 1.8t work with my set up?